RoadVitals

2009 Medtec Ambulance Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Newest Nov 30, 2012
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

2 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

12V554000

SEATS

Nov 30, 2012
977 units potentially affected
The defect: Medtec is recalling certain model year 2009-2011 Ambulances (Type I, Type I-AD, Type II, Type III, and Type III-AD) manufactured from January 2, 2009, through May 1, 2011. If an attendant lands on the bench top with great force, such as when the vehicle hits a bump in the road, the bench top screws may loosen and pull out.
The risk: If the bench top securing screws pull out then the bench top may drop into the cavity of the bench compartment, increasing the risk of personal injury.
The remedy: Medtec will notify owners, and dealers will repair the vehicles free of charge. The recall began on January 8, 2013. Owners may contact Medtec toll-free at 1-866-263-3832.
Medtec Ambulance CorporationManufacturer number 74B238MView on NHTSA.gov
09V108000

SEAT BELTS:FRONT:ANCHORAGE

Apr 1, 2009
72 units potentially affected
The defect: MEDTEC IS RECALLING 72 MY 2007-2009 ADDITIONAL DUTY AMBULANCES. THE SEAT BELT ANCHORS FOR THE SQUAD BENCH ARE FASTENED TO THE SIDEWALL OF THE AMBULANCE BODY, USING 1/4-20 SELF-THREADING MACHINE SCREWS. IN SOME CASES, INCORRECT MOUNTING SCREWS WERE INSTALLED. THE SEAT BELT ANCHORS COULD PULL FREE OF THE WALL MOUNTING.
The risk: IF THIS WERE TO HAPPEN, SERIOUS INJURY OR DEATH COULD OCCUR.
The remedy: DEALERS WILL INSPECT THE SEAT BELT ANCHORS AND MAKE SURE THE ANCHOR FASTENERS ARE TIGHT AND THE FASTENERS ARE NOT MISSING OR PARTIALLY PULLED OUT. THE RECALL IS EXPECTED TO BEGIN DURING MAY 2009. OWNERS MAY CONTACT MEDEC AT 1-866-263-3832.
MEDTEC AMBULANCE CORPORATIONView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources