2024 Mercedes-Benz EQS SUV 580 4MATIC

2024 Mercedes-Maybach S 580 4MATIC, VIN [XXX] , sold to me on 01/21/2026 by Peoria Motor Company LLC d/b/a Mercedes-Benz of [XXX] for $144,995, financed by Mercedes-Benz Financial Services. The dealer's Certified Pre-Owned Inspection Report is dated 01/28/2026 — seven days AFTER contract and one day AFTER the vehicle was shipped to me in California — meaning no valid CPO inspection existed at sale. The dealer's own Service Invoice XXX dated 01/06/2026 shows Line G "rear bumper damage — Recommended NOT Performed," confirming the dealer knew of unrepaired damage and sold the vehicle anyway. Independent iCrash report #XXX documents $15,140.03 in prior collision damage across 58 line items not disclosed at sale. Odometer disclosures are inconsistent across documents (25,541 / 25,534 / 25,535-in / 25,541-out). The Maybach hood ornament shown in the listing was replaced with a standard three-pointed star at delivery (iCrash lines 18 and 45). Vehicle was delivered to a Rocklin, California parking lot at 10:57 PM. After-sal [XXX] by the seller to a Mazda dealership "after 5 PM." A formal demand was sent April 16, 2026; manufacturer's reply on April 21, 2026 addressed only Lemon Law and ignored the disclosure violations. A Final Notice was issued May 8, 2026. I am filing concurrent complaints with FTC, CFPB, California Attorney General, California DMV, California Bureau of Automotive Repair, Arizona Attorney General, and Arizona MVD Dealer Fraud Investigations. A signed Consumer Complaint sworn under penalty of perjury is available on request INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID

11736672

Incident

Jan 30, 2026

Complaint When switching the front passenger display on and off, sporadic images may be shown that are similar to stains on the display. This complaint need not be a permanent one, it may disappear again on its own. Attachments 1648459315482 (1).jpg 1648459315528.jpg Cause Implausible video transfer from head unit during start and switch‑off sequence. These images (artifacts) are of a purely cosmetic nature only and they do not impair the function. Remedy Software update of MBUX (A26/17) to software release E316.5 or higher.

Complaint When switching the front passenger display on and off, sporadic images may be shown that are similar to stains on the display. This complaint need not be a permanent one, it may disappear again on its own. Cause Implausible video transfer from head unit during start and switch‑off sequence. These images (artifacts) are of a purely cosmetic nature only and they do not impair the function. Remedy Software update of MBUX (A26/17) to software release E316.5 or higher.

Issue A software update will be performed that provides enhancements to the robustness and system stability of the communication module. The update is free of charge and runs in the background, which takes about 8 minutes to install. During this time, the vehicle can be driven without any restrictions, and the new software will be active with the next ignition cycle. Remedy MBUSA will conduct an OTA service campaign. Remote software updates are automatically downloaded and installed in the customer’s vehicle free of charge and do not require a dealer visit.

Complaint Slight creaking noises when steering. Cause Noises may come from one or more sleeves of the horn contact plate. Remedy Remove the horn contact plate and check the sleeves for noise; see attached video. If necessary, apply lubricant to the sleeves.

A software update will be performed that provides enhancements to the robustness and system stability of the communication module. The update is free of charge and runs in the background, which takes about 8 minutes to install. During this time, the vehicle can be driven without any restrictions, and the new software will be active with the next ignition cycle. Remedy MBUSA will conduct an OTA service campaign. Remote software updates are automatically downloaded and installed in the customer’s vehicle free of charge and do not require a dealer visit.

Complaint Repeat workshop visit for vehicle vibration while braking from 60MPH. NOTE: Although the symptom is similar to a tire or wheel vibration, it is usually readily noticeable that it is distinctly different if it happens at all times or only while braking. Cause Although the cause of the vibration is most likely due to excessive lateral runout on the rotor or hub/wheel bearing, the system as a whole needs to be checked for other possible contributors. 1. Prior collision damage. 2. Excessive vehicle sitting times without rotating components. 3. Wheel bearing/hub lateral runout. 4. Wheel mating interface has been overtightened (did not follow WIS torque procedures). 5. Mating interfaces have been excessively modified (painted, gouged, bent, etc...). Remedy Read through the entire attached worksheet prior to performing. After performing, please review the final page and perform work accordingly. NOTE: This document is not pre‑authorization or otherwise dealing with warranty. This is intended for diagnostic purposes only. If there are any questions on how to proceed OR The work sheet has been performed and the vehicle has returned with the same concern. Please perform the measurements as seen in the worksheet again and open a TIPS case to the Body, Chassis, and Entertainment team.