RoadVitals

2007 Mercedes-Benz S221 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Newest Aug 14, 2008
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

1 campaign cover this model year — what the defect is, what it could cause, and what the remedy is

08V405000

SUSPENSION

Aug 14, 2008
4,564 units potentially affected
The defect: MERCEDES BENZ IS RECALLING 4,564 MY 2001-2006 CL-CLASS (MODEL 215), MY 2002-2006 S-CLASS (MODEL 220), MY 2003-2007 SL-CLASS (MODEL 230), MY 2007-2008 CL-CLASS (MODEL 216), AND MY 2007 S-CLASS (MODEL 221)PASSENGER VEHICLES EQUIPPED WITH ACTIVE BODY CONTROL (ABC) ACCELERATION SENSORS ON THE FRONT STRUTS. THESE SENSORS MEASURE ACCELERATION AROUND THE Z-AXIS OF THE VEHICLE AND ASSURE AN AUTOMATIC ADAPTATION OF THE FRONT STRUTS TO MAINTAIN A RELATIVELY LEVEL BODY POSITION. VARIATIONS IN THE SOLDERING PROCESS RESULTED IN SOLDERING POINTS ON THE BOARD OF THE ABC SENSORS WHICH MAY NOT BE WITHIN DESIGN TOLERANCES. SIGNALS FROM THE AFFECTED SENSORS MEASURING THE ACCELERATION MAY NOT BE ACCURATELY TRANSMITTED TO THE ENGINE CONTROL UNIT.
The risk: A VARIATION IN THE TRANSMITTED VALUES BETWEEN AFFECTED AND UNAFFECTED SENSORS CAN RESULT IN ONE FRONT STRUT ADJUSTING TO A VALUE INDICATING BODY MOVEMENT WHILE ANOTHER STRUT DOES NOT ADJUST PRESENTING THE DRIVER WITH AN UNEVEN FRONT SUSPENSION. THIS CONDITION MAY LEAD TO UNEXPECTED BODY MOVEMENTS AT THE FRONT AXLE WHICH CAN ADVERSELY INFLUENCE THE VEHICLE'S DIRECTIONAL STABILITY AND COULD LEAD TO A VEHICLE CRASH.
The remedy: DEALERS WILL INSPECT AND REPLACE, IF NECESSARY, THE FRONT ABC SENSORS IN ALL POTENTIALLY AFFECTED VEHICLES. THE RECALL BEGAN ON SEPTEMBER 22, 2008. OWNERS MAY CONTACT MERCEDES-BENZ AT 1-800-367-6372.
MERCEDES-BENZ USA, LLC.Manufacturer number 2008080004View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources