SUSPENSION
2001 Mercedes-Benz S600 Recalls
Safety recall campaigns filed with NHTSA that cover this model year
Data refreshed
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govRecall campaigns
1 campaign cover this model year — what the defect is, what it could cause, and what the remedy is
What a recall is
- Safety recall
- A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
- Safety investigation
- NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
- Manufacturer communication
- Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Safety investigations
NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.
INSTRUMENT CLUSTER FAILURE
THE OFFICE OF DEFECTS INVESTIGATION (ODI) OPENED THIS INVESTIGATION BASED ON SEVEN REPORTS INDICATING THAT THE INSTRUMENT CLUSTERS IN MODEL YEAR (MY) 2000-2001 MERCEDES-BENZ S CLASS VEHICLES FAILED IN THAT CONSUMERS WERE UNABLE TO READ ANY OF THE GAUGES WHILE OPERATING THEIR VEHICLES AT ANY SPEED DURING THE DAY OR NIGHT.IN ITS 573 REPORT TO NHTSA DATED FEBRUARY 1, 2006, MERCEDES-BENZ USA, LLC (MERCEDES-BENZ)STATES THAT THERE ARE THREE INSTRUMENT CLUSTER FAILURE MODES THAT WOULD RESULT IN UNDESIRABLE OPERATION.THESE THREE FAILURE MODES ARE SPECIFIC TO CERTAIN DATES OF PRODUCTION (SEE BELOW) FOR THE SUBJECT VEHICLE, AND MERCEDES-BENZ IS RECALLING THOSE VEHICLES WITHIN THOSE DATES.SPECIFIC INFORMATION REGARDING THE FAILURE MODES IS DESCRIBED IN MERCEDES-BENZ'S REPORT (SEE NHTSA RECALL 06V028).THREE OF THE ODI COMPLAINTS SUBMITTED TO MERCEDES-BENZ INVOLVE VEHICLES THAT WERE PRODUCED BEFORE THE DATES OF PRODUCTION OF VEHICLES AFFECTED BY THE THREE FAILURE MODES.BASED ON REVIEW OF THOSE THREE COMPLAINTS, MERCEDES-BENZ WAS UNABLE TO IDENTIFY A RELATION OF THOSE THREE TO THE DEFECTS IDENTIFIED IN THE RECALLED VEHICLES.ALL OF THE MERCEDES-BENZ COMPLAINTS WITH VINS IDENTIFIED WERE WITHIN THE RECALL POPULATION (ONLY 2 VEHICLE VINS WERE NOT AVAILABLE TO POSITIVELY IDENTIFY VEHICLE BUILD DATE).THE RECALL POPULATION WILL INCLUDE 36,911 S CLASS AND CL CLASS MERCEDES-BENZ VEHICLES BUILT IN THE PRODUCTION DATES RANGING FROM JUNE 2000 THROUGH NOVEMBER 2000, JANUARY 2002 THROUGH APRIL 2002, AND MAY 2004 THROUGH SEPTEMBER 2004.THESE DATES OF PRODUCTION COVER VEHICLES FROM THE 2000-2002 MY AND THE 2004-2005 MY.TO CORRECT THE CONDITION, MERCEDES-BENZ WILL REPLACE ALL AFFECTED INSTRUMENT CLUSTERS WITH IMPROVED ONES THAT ARE NOT SUBJECT TO THE FAILURE MODES.MERCEDES-BENZ WILL BEGIN OWNER NOTIFICATION DURING THE 1ST QUARTER OF 2006.
Elsewhere on this vehicle
Data sources
- NHTSA Office of Defects Investigation — recall campaigns and safety investigations
Data on this page last refreshed .