RoadVitals

2004 Mercedes-Benz Sl Class Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Jul 7, 2008
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

08V303000

ELECTRICAL SYSTEM

Jul 7, 2008
404 units potentially affected
The defect: MERCEDES-BENZ IS RECALLING MY 2006-2008 M-CLASS, R-CLASS, MY 2005-2009 SLK-CLASS, MY 2005-2008 C-CLASS, MY 2003-2004 AND 2006-2008 CLK-CLASS, MY 2003-2008 E-CLASS, MY 2004 AND 2008 CL-CLASS, MY 2008 CLS-CLASS, MY 2004 AND 2007-2008 S-CLASS, MY 2003 G-CLASS, AND MY 2003-2004, 2006 AND 2009 SL-CLASS VEHICLES. A SOFTWARE CALIBRATION NUMBER (SCN) CODING RECEIVED ON THE AFFECTED VEHICLES DURING A RECENT WORKSHOP VISIT WAS INCORRECT. DEPENDING ON THE MODEL YEAR AND MODEL AFFECTED, THE RESULTS OF AN INCORRECT SCN CODING CAN AFFECT A NUMBER OF VEHICLE SAFETY AND EMISSION FUNCTIONS INCLUDING THE FOLLOWING TYPES OF FUNCTIONS: (1) THE FUEL GAUGE READINGS MAY BE INCORRECT; (2) A STUCK FUEL-LEVEL SENSOR MAY NOT BE DISPLAYED IN THE INSTRUMENT CLUSTER; (3) THE OBD SYSTEM MAY CAUSE THE CHECK ENGINE LIGHT TO ILLUMINATE INCORRECTLY; AND, (4) THE SPEEDOMETER MAY BE OUT OF TOLERANCE.
The risk: IN THE EVENT OF A VEHICLE CRASH, THE ELECTRICAL FUEL PUMP MAY NOT RECEIVE A CRASH SIGNAL THAT IS REQUIRED FOR THE FUEL PUMP TO DISCONNECT AND PREVENT FUTURE FUEL DELIVERY AS DESIGNED.
The remedy: DEALERS WILL RECODE THE SCN FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 30, 2008. OWNERS MAY CONTACT MERCEDES-BENZ AT 1-800-367-6372.
MERCEDES-BENZ USA, LLC.Manufacturer number 2008 070001View on NHTSA.gov
05V133000

SERVICE BRAKES, HYDRAULIC

Apr 1, 2005
204,000 units potentially affected
The defect: ON CERTAIN VEHICLES, THE SENSOTRONIC BRAKE CONTROL (SBC) SYSTEM MAY PREMATURELY SHIFT TO THE HYDRAULIC BACK-UP FUNCTION MODE, DUE TO DETERIORATION OF THE WIRING HARNESS CONNECTION, OR DUE TO PREMATURE FAILURE OF THE HYDRAULIC PUMP.
The risk: IN THE HYDRAULIC BACK-UP MODE, THE DRIVER HAS BRAKING POWER SUFFICIENT TO STOP THE VEHICLE, ALTHOUGH GREATER BRAKE PEDAL PRESSURE IS REQUIRED AND THE BRAKE PEDAL TRAVEL WILL BE NOTICEABLY LONGER.
The remedy: DEALERS WILL INSTALL A BRACKET AND REPLACEMENT GROUND WIRE TO THE SBC PUMP UNIT ON ALL VEHICLES FREE OF CHARGE. ADDITIONALLY DEALERS WILL INSPECT AND REPLACE THE SBC PUMP UNIT IN SL VEHICLES PRODUCED DURING A LIMITED PRODUCTION PERIOD. THE RECALL BEGAN ON AUGUST 8, 2005. OWNERS MAY CONTACT MERCEDES-BENZ AT 1-800-367-6372.
MERCEDES-BENZ USA, LLC.Manufacturer number 2005070007 & 2005110View on NHTSA.gov
04V296000

SERVICE BRAKES, HYDRAULIC

Jun 22, 2004
143,387 units potentially affected
The defect: ON CERTAIN VEHICLES, THE ELECTRONIC MONITORING SYSTEM OF THE SENSOTRONIC BRAKE CONTROL (SBC) IS DESIGNED TO MONITOR THE PRESSURE GRADIENT WITHIN THE HIGH PRESSURE LINE OF THE BRAKE SYSTEM. IF AN UNACCEPTABLE PRESSURE GRADIENT IS DETECTED, THE SYSTEM WILL SWITCH, AS IT IS DESIGNED TO DO, INTO THE HYDRAULIC FUNCTION MODE.
The risk: IF VEHICLES ARE NOT ROUTINELY SERVICED AND HAVE EXTREMELY HIGH MILEAGE COMBINED WITH A HIGH NUMBER OF BRAKE ACTUATIONS, OR A HIGH BRAKE ACTUATION FREQUENCY, THE PUMP MOTOR OF THE SBC MAY RUN OUT OF PERMISSIBLE TOLERANCES, THEREBY TRIGGERING THE HYDRAULIC FUNCTION MODE.
The remedy: DEALERS WILL INSPECT THE SBC HYDRAULIC UNIT, REPLACING IT IF NECESSARY. THE RECALL BEGAN ON OCTOBER 21M 2004. OWNERS SHOULD CONTACT MERCEDES-BENZ AT 1-800-367-6372.
MERCEDES-BENZ USA, LLC.Manufacturer number 2004050014View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE07042ClosedPreliminary Evaluation

AIR SUSPENSION SYSTEM FAILURE

Opened Aug 14, 2007
Closed Nov 20, 2007

THE SUBJECT S-CLASS VEHICLES CONTAIN A COMPRESSED AIR SUSPENSION SYSTEM THAT USES AIR STRUTS ON EACH OF THE FOUR WHEELS IN LIEU OF TRADITIONAL SPRINGS AND SHOCK ABSORBERS.THESE AIR STRUTS USE COMPRESSED AIR TO SUPPORT THE WEIGHT OF THE VEHICLE AND CONTROL RIDE HEIGHT.IN THE EVENT OF THE LOSS OF AIR FROM THE SYSTEM, AN ALERT WILL FLASH ON THE INSTRUMENT CLUSTER WARNING THE DRIVER TO EITHER DRIVE CAREFULLY OR TO STOP THE VEHICLE.THE VEHICLE RIDE HEIGHT CAN BE REDUCED BY AS MUCH AS 105 MM BELOW NORMAL RIDE HEIGHT BEFORE THE FULL LOAD OF THE VEHICLE FOR THAT WHEEL COMES TO REST ON A STEEL ROD, WITH A RUBBER STOP ON THE END, LOCATED IN THE SHOCK ABSORBER.THIS REST-STOP CONDITION IS DESIGNED SUCH THAT THERE IS NO IMPACT ON VEHICLE CONTROL.MERCEDES-BENZ (MBUSA) SUPPLIED VIDEO SHOWING A VEHICLE IN THIS CONDITION OPERATING UNDER SEVERAL DIFFERENT SITUATIONS INCLUDING EVASIVE MANEUVERS DEMONSTRATING THE ABILITY OF THE VEHICLE TO BE CONTROLLED EFFECTIVELY WITH A RIDE HEIGHT REDUCED TO THE MINIMUM.ONLY THOSE COMPLAINTS TO ODI AND MBUSA THAT ALLEGED A STEERING INTERFERENCE DURING A REDUCED RIDE HEIGHT CONDITION WERE COUNTED IN THIS RESUME FAILURE REPORT.SOME COMPLAINTS ALLEGED THAT WITH A REDUCED RIDE HEIGHT AND A STOP NOW WARNING MESSAGE THERE WAS A RUBBING NOISE WHEN TURNING, BUT THE ABILITY TO STEER THE VEHICLE WAS NOT COMPROMISED.A SAMPLING OF WARRANTY CLAIMS SUBMITTED BY MBUSA DID NOT REVEAL ANY INDICATING A LOSS OF CONTROL DUE TO AN AIRMATIC SYSTEM FAILURE.THERE WAS ONE CRASH REPORTED BY MBUSA TO ODI BUT THE INFORMATION AVAILABLE INDICATED THAT IT RELATED TO SUSPENSION SYSTEMS AND IT WAS NOT POSSIBLE TO VERIFY THAT THE INCIDENT WAS RELATED TO AN AIRMATIC SYSTEM FAILURE. FURTHER USE OF AGENCY RESOURCES IN THIS MATTER DOES NOT APPEAR TO BE WARRANTED.THE AGENCY WILL CONTINUE TO MONITOR COMPLAINTS AND OTHER INFORMATION RELATING TO THE ALLEGED DEFECT IN THE SUBJECT VEHICLES AND WILL TAKE FURTHER ACTION IN THE FUTURE IF WARRANTED.THIS PRELIMINARY EVALUATION IS CLOSED.

SUSPENSION:FRONT:SPRINGS:AIR SUSPENSION:LINES AND FITTINGS

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .