RoadVitals

2000 Mercury Villager Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Newest Oct 10, 2000
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

2 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

00V292001

STEERING:RACK AND PINION

Oct 10, 2000
67,200 units potentially affected
The defect: VEHICLE DESCRIPTION: MINI VANS. ONE OR MORE OF THE FIVE BOLTS THAT MOUNT THE RACK AND PINION STEERING GEAR TO THE VEHICLE MAY HAVE BEEN INCORRECTLY TIGHTENED.
The risk: THERE COULD BE A LOOSENESS IN THE STEERING, WHICH MAY BE ACCOMPANIED BY NOISE OR VIBRATION.
The remedy: DEALERS WILL INSPECT THE VEHICLES AND, IF THE BOLTS ARE MISSING, WILL REPLACE THE STEERING GEAR MOUNTING BOLTS. ALL BOLTS WILL BE TIGHTENED TO THE SPECIFIED TORQUE. OWNER NOTIFICATION BEGAN NOVEMBER 28, 2000. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-800-392-3673.
FORD MOTOR COMPANYManufacturer number 00S33View on NHTSA.gov
00V228001

SEAT BELTS

Aug 18, 2000
144,435 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES, LIGHT DUTY TRUCKS, SPORT UTILITY VEHICLES, AND MINI VANS EQUIPPED WITH TRW SEAT BELT BUCKLE ASSEMBLIES. THE BUCKLE BASE OF THESE SEAT BELT ASSEMBLIES WERE NOT PROPERLY HEAT TREATED AND THEREFORE DO NOT PASS THE LOAD BEARING REQUIREMENT OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES."
The risk: IN THE EVENT OF A VEHICLE CRASH, THE OCCUPANT MAY NOT BE PROPERLY RESTRAINED.
The remedy: DEALERS WILL INSPECT THE DATE CODE ON CERTAIN SEAT BELT BUCKLES OF YOUR VEHICLE AND REPLACE ALL SEAT BELT BUCKLES THAT FALL WITHIN THE SUSPECT DATE CODE RANGE. OWNER NOTIFICATION BEGAN OCTOBER 26, 2000. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-800-392-3673.
FORD MOTOR COMPANYManufacturer number 00S21View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE04020ClosedPreliminary Evaluation

FAILING HEADLIGHTS

Opened Feb 26, 2004
Closed Jun 24, 2004

NISSAN AND FORD FOUND THAT THE ORIGINAL EQUIPMENT HEADLIGHT STAINLESS STEEL BULB TERMINALS MAY OVER TIME CAUSE ELEVATED CONTACT RESISTANCE AND OVERHEAT THE ELECTRICAL CONNECTOR HOUSING.THIS CAN RESULT IN A HEADLIGHT FLICKERING, BULB OUTAGE AND HEAT DEFORMATION TO THE HEADLIGHT CONNECTOR.IN APRIL 1999, THE SUPPLIER OF THE HEADLIGHT FOR NISSAN AND FORD CHANGED TO A BULB USING THE STAINLESS STEEL TERMINALS THAT DID NOT MEET ORIGINAL SPECIFICATIONS.ON JULY 17, 2000, THE SUPPLIER BEGAN USING A BULB MEETING THE VEHICLE MANUFACTURER'S SPECIFICATIONS.THIS PROBLEM CAN AFFECT INDEPENDENTLY EITHER HEADLIGHT BUT DOES NOT CAUSE SIMULTANEOUS FAILURE OF BOTH HEADLIGHTS. THE PROBLEM ALSO DOES NOT AFFECT FRONT PARKING LAMPS.AS A RESULT, THE COMPLAINTS TYPICAL REPORT SINGLE FAILURE OF ONE HEADLIGHT.THERE ARE NO CRASHES OR LOSS OF VEHICLE CONTROL REPORTED.A SAFETY-RELATED DEFECT TREND HAS NOT BEEN IDENTIFIED AT THIS TIME AND FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT NO SAFETY-RELATED DEFECT EXISTS.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.

EXTERIOR LIGHTING:HEADLIGHTS

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .