RoadVitals

2006 Mitsubishi Fuso FE85D Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
7
Newest Jan 11, 2018
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

7 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

18V047000

EQUIPMENT

Jan 11, 2018
1,153 units potentially affected
The defect: Mitsubishi Fuso Truck of America, Inc. (MFTA) is recalling certain 2004-2017 FE84D, FE85D, FEC52, FEC72, FEC92, FGB72, FK61F and FM657 trucks. These trucks are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
The risk: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.
The remedy: MFTA will notify owners, instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on January 11, 2018. Owners may contact MFTA customer service at 1-877-711-0707, or Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. MFTA's number for this recall is MFV00001.
Mitsubishi Fuso Truck of America, Inc.Manufacturer number MFV00001View on NHTSA.gov
12V545000

FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS

Nov 23, 2012
13,644 units potentially affected
The defect: Mitsubishi Fuso Truck of America (MFTA) is recalling certain model year 2005-2007 FE83D, FE84D, FE85D, and FG84D trucks; manufactured from May 27, 2004, through May 14, 2007. The fuel pipes may crack due to an improper manufacturing process. Additionally, the fuel pipe flare nuts may have been insufficiently tightened.
The risk: Cracked fuel pipes or loose fuel pipe flare nuts may leak fuel. A fuel leak in the presence of an ignition source may result in a vehicle fire.
The remedy: MFTA will notify owners, and dealers will inspect the fuel pipes and tighten or replace them as needed, free of charge. The safety recall began on January 21, 2013. Owners may contact MFTA at 1-856-467-4500.
Mitsubishi Fuso Truck of America, Inc.Manufacturer number C1006110View on NHTSA.gov
09V449000

EQUIPMENT

Nov 19, 2009
16,384 units potentially affected
The defect: MITSUBISHI FUSO IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2010 FE83D, FE84D, FE85D AND FG84D VEHICLES. THE WEATHER RESISTANCE PROPERTIES OF THE AIR INTAKE DUCT RUBBER CUSHIONS IS INSUFFICIENT. DURING NORMAL VEHICLE OPERATION, THE RUBBER CUSHIONS DETERIORATE AND CRACK, CAUSING ABNORMAL NOISE.
The risk: ALL OF THE RUBBER CUSHIONS COULD CRACK, ALLOWING THE AIR INTAKE DUCT TO FALL OFF OF THE TRUCK INCREASING THE RISK OF CRASH.
The remedy: DEALERS WILL REPLACE ALL OF THE AIR INTAKE DUCT RUBBER CUSHIONS WITH COMPONENTS MANUFACTURED TO PROPER SPECIFICATIONS. THIS REMEDY WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON FEBRUARY 19, 2010. OWNERS MAY CONTACT MITSUBISHI FUSO AT 1-856-467-4500.
MITSUBISHI FUSO TRUCK OF AMERICA, INC.Manufacturer number C1004110View on NHTSA.gov
07V229000

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS

Jun 4, 2007
5,090 units potentially affected
The defect: ON CERTAIN MEDIUM DUTY TRUCKS, THE BRAKE VACUUM HOSE MAY HAVE BEEN MANUFACTURED WITH INSUFFICIENT WALL THICKNESS ALLOWING THE HOSE TO COLLAPSE DURING NORMAL VEHICLE OPERATION.
The risk: CONTINUED OPERATION OF THIS VEHICLE IN THIS CONDITION COULD (1) WITH RESPECT TO THE FE83D FE84D, AND FG84D MODELS, RESTRICT PROPER OPERATION OF THE BRAKE POWER-ASSIST AND COMPROMISE BRAKING PERFORMANCE; AND (2) WITH RESPECT TO THE FE85D MODEL, RESTRICT PROPER OPERATION OF THE EXHAUST BRAKE SYSTEM. EITHER OCCURRENCE COULD LEAD TO COMPROMISED BRAKING PERFORMANCE AND INCREASED BRAKING DISTANCES, WHICH COULD CAUSE A CRASH WITHOUT WARNING.
The remedy: DEALERS WILL REPLACE THE BRAKE VACUUM HOSE WITH A HOSE MANUFACTURED WITH WALLS OF PROPER THICKNESS. THE RECALL BEGAN ON AUGUST 20, 2007. OWNERS MAY CONTACT MITSUBISHI FUSO AT 1-856-467-3917.
MITSUBISHI FUSO TRUCK OF AMERICA, INC.Manufacturer number C1002510View on NHTSA.gov
07V138000

ENGINE AND ENGINE COOLING

Mar 26, 2007
8,712 units potentially affected
The defect: ON CERTAIN TRUCKS, THE CYLINDER HEAD IDLER GEAR BUSHING MAY HAVE BEEN IMPROPERLY MACHINED, CAUSING EXCESSIVE STRESS ON THE CYLINDER HEAD IDLER GEAR SHAFT. CONTINUED OPERATING IN THIS CONDITION COULD CAUSE THE IDLER GEAR SHAFT FLANGE TO BREAK AND GENERATE ABNORMAL ENGINE NOISE OR ENGINE OIL LEAKS.
The risk: THE ENGINE COULD STALL AND WOULD NOT RESTART INCREASING THE RISK OF A CRASH.
The remedy: ON VEHICLES WITH LESS THAN 15,000 MILES, IF THE IDLER GEAR AND BUSHING ASSEMBLY, IDLER GEAR SHAFT AND BOLT WILL BE REPLACED. IF THE MILEAGE IS MORE THAN 15,000 MILES, THE INSIDE DIAMETER OF THE IDLER GEAR BUSHING WILL BE MEASURED AND IF THE BUSHING MEASURES MORE THAN 32.043MM (1.262"), THE IDLER GEAR AND BUSHING ASSEMBLY, IDLER GEAR SHAFT AND BOLT WILL BE REPLACED. THE RECALL BEGAN ON AUGUST 13, 2007. OWNERS MAY CONTACT MITSUBISHI FUSO AT 1-856-467-4500.
MITSUBISHI FUSO TRUCK OF AMERICA, INC.Manufacturer number C1002210View on NHTSA.gov
06V477000

SERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGS

Dec 20, 2006
5,466 units potentially affected
The defect: ON CERTAIN TRUCKS, THE BRAKE VACUUM HOSE MAY HAVE BEEN MANUFACTURED WITH INSUFFICIENT WALL THICKNESS, ALLOWING THE HOSE TO COLLAPSE DURING NORMAL VEHICLE OPERATION.
The risk: CONTINUED OPERATION OF THE VEHICLE IN THIS CONDITION COULD RESTRICT PROPER OPERATION OF THE BRAKE POWER-ASSIST AND COMPROMISE BRAKING PERFORMANCE; OR RESTRICT PROPER OPERATION OF THE EXHAUST BRAKE SYSTEM. EITHER OCCURRENCE COULD LEAD TO COMPROMISED BRAKING PERFORMANCE AND INCREASED BRAKING DISTANCE, WHICH COULD CAUSE A CRASH WITHOUT WARNING.
The remedy: DEALERS WILL INSPECT THE BRAKE VACUUM HOSE AND WILL REPLACE THE HOSE. THE RECALL BEGAN ON DECEMBER 21, 2006. OWNERS MAY CONTACT MITSUBISHI FUSO AT 877-711-0707.
MITSUBISHI FUSO TRUCK OF AMERICA, INC.Manufacturer number C1001810View on NHTSA.gov
05V410000

EXTERIOR LIGHTING:TURN SIGNAL

Sep 15, 2005
4,571 units potentially affected
The defect: ON CERTAIN TRUCKS, THE DOOR WIRING HARNESS INTERFERES WITH THE TURN SIGNAL AND HAZARD LAMP WIRING HARNESS DUE TO IMPROPER ROUTING.
The risk: REPEATED OPENING AND CLOSING OF THE DOORS COULD BREAK THE TURN SIGNAL AND HAZARD LAMP WIRING HARNESS, CAUSING THE LAMPS TO BECOME INOPERATIVE.
The remedy: DEALERS WILL ADD PROTECTIVE TUBING AT THE DOOR WIRING HARNESS GROMMET, INSTALL A PROTECTIVE CAP ON THE TURN SIGNAL AND HAZARD LAMP CONNECTOR AND REPAIR ANY WIRING HARNESS DAMAGE. THE RECALL BEGAN ON NOVEMBER 23, 2005. OWNERS MAY CONTACT MITSUBISHI FUSO AT 1-856-467-4500.
MITSUBISHI FUSO TRUCK OF AMERICA, INC.Manufacturer number C1000210View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE06041ClosedPreliminary Evaluation

BRAKE VACUUM BOOSTER HOSE COLLAPSES

Opened Sep 18, 2006
Closed Jan 5, 2007

THIS INVESTIGATION WAS OPENED BASED ON ODI'S RECEIPT OFEWR INFORMATION PERTAINING TO COLLAPSING BRAKE VACUUM HOSES ON THE SUBJECT VEHICLES.THE VEHICLES OF CONCERN ARE MEDIUM DUTY TRUCKS, MODEL YEARS 2006 - 2007,MODELS FE84D, FE85D AND FG84D.ODI MET WITH MITSUBISHI OFFICIALS AND DROVE A TRUCK WITH THE COLLAPSED HOSE.IT WAS DETERMINED THAT THE VACUUM BRAKE BOOSTER HOSE CAN FLATTEN OR COLLAPSE WHILE THE TRUCK IS BEING DRIVEN, RESULTING INDEGRADATION (REDUCED VACUUM) OF THE BRAKE POWER-ASSIST SYSTEM. THE REDUCTION IN AVAILABLE ENGINE VACUUM TO THE BRAKE BOOSTER REQUIRES THE DRIVER TO APPLY INCREASED BRAKE PEDAL PRESSURE TO ACHIEVE THE EXPECTED STOPPING DISTANCE. DURING THE INVESTIGATION, ODI LEARNED THAT THE BRAKE VACUUM HOSE WAS MANUFACTURED WITH INSUFFICIENT WALL THICKNESS, ALLOWING THE HOSE TO COLLAPSE DURING NORMAL VEHICLE OPERATION. DURING THE RECALL MITSUBISHI WILL REPLACE ALL VACUUM BRAKE BOOSTER HOSES ON THE APPLICABLE TRUCKS.THIS INVESTIGATION IS CLOSED.

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGSLed to recall 06V477000

Elsewhere on this vehicle

Data sources