RoadVitals

1998 Navistar 4700 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
5
Newest Mar 15, 1999
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

5 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

99V014002

SUSPENSION:FRONT:WHEEL BEARING

Mar 15, 1999
4,024 units potentially affected
The defect: VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCK CHASSIS EQUIPPED WITH 16,000 LB., 18,000 LB., OR 20,000 LB. HEAVY DUTY STEERING AXLES. THE INNER WHEEL BEARING CONE FOR THE STEERING AXLE WHEEL HUB ASSEMBLY DOES NOT PROPERLY FIT ONTO THE NAVISTAR STEERING AXLE SPINDLE ASSEMBLY. IMPROPER FIT OF THE BEARING TO THE SPINDLE INCREASES THE STRESS LEVELS TO THE STEERING AXLE SPINDLE WHICH COULD CAUSE SPINDLE FAILURE.
The risk: IF THE SPINDLE FAILS, A LOSS OF DRIVER CONTROL COULD OCCUR, INCREASING THE RISK OF A VEHICLE CRASH.
The remedy: DEALERS WILL REMOVE THE LEFT AND RIGHT HUB/DRUM ASSEMBLIES FROM THE STEERING AXLES AND REPLACE THE INNER WHEEL BEARING CONES AND CUPS.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 99503View on NHTSA.gov
99V033001

STEERING:LINKAGES:ROD:RELAY:CONNECTING

Feb 16, 1999
40,091 units potentially affected
The defect: SCHOOL, TRANSIT, OR HEAVY DUTY VEHICLES EQUIPPED WITH SPICER 6,000 OR 8,000 LB. FRONT STEER AXLES. THE TIE ROD END CAN PULL OUTBOARD AND SEPARATE FROM THE TIE ROD TUBE DUE TO IMPROPER THREAD ENGAGEMENT BETWEEN THE MALE TIE ROD END AND THE FEMALE TUBE.
The risk: SEPARATION OF THE TIE ROD END COULD RESULT IN LOSS OF STEERING CONTROL, INCREASING THE RISK OF A VEHICLE CRASH.
The remedy: DEALERS WILL REPLACE THE COMPLETE TIE ROD ASSEMBLY.
INTERNATIONAL TRUCK AND ENGINEManufacturer number 99501View on NHTSA.gov
98V289000

FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM

Nov 9, 1998
16,231 units potentially affected
The defect: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH A T444E DIESEL ENGINE. THE HIGH PRESSURE OILLINE FOR THE FUEL INJECTION SYSTEM THAT GOES FROM THE HIGH PRESSURE OIL PUMP TO THE RIGHT CYLINDER HEAD CAN CHAFE AGAINST THE CHARGE AIR COOLER CROSSOVER PIPE.
The risk: IF THIS CONDITION OCCURS, THE HOSE WILL FAIL, RESULTING IN A SUDDEN LOSS OF OIL, CAUSING THE ENGINE TO HAVE A SUDDEN LOSS OF POWER.
The remedy: DEALERS WILL INSPECT THE HOSES AND IF THE HOSE IS NOT DAMAGED A CONVOLUTED HOSE WILL BE PLACED OVER THE CURRENT HOSE. IF THE HOSE IS DAMAGED, IT WILL BE REPLACED ALONG WITH THE CONVOLUTED HOSE.
INTERNATIONAL TRUCK AND ENGINEView on NHTSA.gov
98V291000

ENGINE AND ENGINE COOLING:ENGINE:GASOLINE

Nov 9, 1998
22,032 units potentially affected
The defect: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH T444E DIESEL ENGINES. A FUEL LEAK CAN OCCUR BECAUSE OF OVERCRIMPING OF THE HOSE END FITTINGS ON THE HOSE FROM THE REGULATOR TO THE LEFT HEAD AND THE HOSE FROM THE FUEL TRANSFER PUMP TO THE REGULATOR.
The risk: FUEL LEAKAGE, IN THE PRESENCE OF AN IGNITION SOURCE, CAN RESULT IN A FIRE.
The remedy: DEALERS WILL INSPECT THE OIL HOSE AND PLACE AN ADDITIONAL CONVOLUTED LOOM AROUND THE EXISTING OIL HOSE, OR REPLACE THE HOSE ASSEMBLY.
INTERNATIONAL TRUCK AND ENGINEView on NHTSA.gov
98V228000

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:DRUM

Sep 17, 1998
1,809 units potentially affected
The defect: VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH A 1710 DRIVE LINE AND A 12 X 4 HYDRAULIC PARKING BRAKE. IF THE BRAKE DRUM OR TRANSMISSION YOKE ARE NOT FULLY SEATED WHEN THE EIGHT BOLTS ARE INSTALLED CONNECTING THE 3-PIECE JOINT, THE BOLTS CAN LOOSEN.
The risk: BOLTS WILL EVENTUALLY WORK OUT OR SHEAR RESULTING IN DRUM AND DRIVE SHAFT SEPARATION.
The remedy: DEALERS WILL INSPECT THE TORQUE OF THESE BOLTS AND RE-TORQUE TO SPECIFICATION.
INTERNATIONAL TRUCK AND ENGINEView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources