RoadVitals

2023 Nissan Versa Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Newest Feb 27, 2024
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

1 campaign cover this model year — what the defect is, what it could cause, and what the remedy is

24V154000

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

Feb 27, 2024
351 units potentially affected
The defect: Nissan North America, Inc. (Nissan) is recalling certain 2024 Titan, Frontier, Infiniti QX60, Pathfinder, 2023-2024 Sentra, Versa, Kicks, Infiniti QX50, and 2023 Rogue vehicles. Due to a manufacturing issue, the driver's air bag inflator may absorb moisture, and cause the air bag to deploy improperly.
The risk: An air bag that deploys improperly may not protect the driver as intended during a crash, increasing the risk of injury.
The remedy: Dealers will replace the front driver's air bag assembly, free of charge. Owner notification letters were mailed April 10, 2024. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's numbers for this recall are PD103, PD104, and PMA34.
Nissan North America, Inc.Manufacturer number PD103, PD104, PMA34View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE24007ClosedPreliminary Evaluation

Reduced Power After Engine Stall

Opened Mar 7, 2024
Closed Oct 2, 2025

The Office of Defects Investigation (ODI) opened this investigation on March 7, 2024, after receiving twenty (20) consumer complaints and multiple field reports describing reduced power (limp mode) after re-starting the vehicle following a stall on certain 2022-2024 model year (MY) Nissan Versa.  A Preliminary Evaluation was opened to gather information and assess whether the subject vehicles contain a safety-related defect. During this investigation, Nissan explained that certain 2022-2044 MY Nissan Versa vehicles equipped with a manual transmission may, under specific conditions, experience a Malfunction Indicator Light (MIL) along with reduced engine performance following an engine start-up after a stall.  In certain conditions, if the vehicle stalls and an engine restart occurs within five (5) seconds, the vehicle will enter a fail-safe mode with limited engine torque. The fail-safe mode helps prevent damage to the engine, a complete loss of motive power, and allows the driver to maintain control of the vehicle. ODI reviewed over 180 incidents where drivers described entering a limp mode following a vehicle re-start after having stalled the vehicle.  Review of these incidents did not identify any alleged crashes, near crashes, or injuries.  In all of the cases reviewed, the driver was able to drive the vehicle to a safe location. On April 28, 2025, Nissan released a Technical Service Bulletin NTB25-024 on certain MY 2022-2024 Versa vehicles equipped with a manual transmission.The remedy applies to subject vehicles built through July 9, 2024, and consists of replacing the Valve Timing Control (VTC) unit and installing updated control software.  The bulletin will be implemented at no charge to the customer and includes all parts and labor.  Subject vehicles built after July 9, 2024 were manufactured with these changes already in place. Following updates to the subject vehicles, ODI has not received any consumer complaints describing a limp mode condition on vehicles built after July 9, 2024 or after having received the NTB25-024 remedy. ODI believes the campaign issued by Nissan addresses the concerns raised in this investigation. As a result, PE24007 is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The agency reserves the right to take any additional action if warranted. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.

POWER TRAIN

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .