RoadVitals

1996 Oshkosh MT14FDU Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Newest Mar 27, 1996
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

1 campaign cover this model year — what the defect is, what it could cause, and what the remedy is

96V051000

STEERING:RACK AND PINION

Mar 27, 1996
2,283 units potentially affected
The defect: (1) THE MOUNTING PLATE, WHICH IS USED IN COMBINATION WITH FOUR BOLTS TO SECURE THE SAGINAW 710 STEERING GEAR TO THE CHASSIS FRAME, WAS DESIGNED TO HAVE FOUR WELDED BOSSES WITH THE SAME FINAL HEIGHT DIMENSION. THIS PLATE WAS NOT GROUND DOWN; (2) PAINT WAS LEFT ON THE SURFACE BETWEEN THE MOUNTING PLATE AND THE STEERING GEAR; (3) A FLANGED-HEAD BOLT WAS MISALIGNED THROUGH THE FRAME, MOUNTING PLATE AND THE STEERING GEAR; OR (4) THE TOLERANCES BETWEEN THE FRAME AND THE MOUNTING PLATE HOLES WERE TOO TIGHT CAUSING AN ALIGNMENT PROBLEM DURING ASSEMBLY.
The risk: THESE CONDITIONS CAN CAUSE LOOSE STEERING GEAR BOLTS WHICH COULD LEAD TO LOSS OF STEERING CONTROL INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT.
The remedy: DEALERS WILL REPLACE THE STEERING GEAR FLANGED-HEAD MOUNTING BOLTS; THE MOUNTING PLATE WILL BE MACHINED TO SPECIFICATION ALSO INSURING THAT THE SURFACE IS FREE OF PAINT; THE STEERING GEAR MOUNTING FASTENERS WILL BE REPLACED; AND THE HOLES THROUGH THE FRAME AND THE MOUNTING PLATE WILL BE ENLARGED TO ALLOW FOR INCREASED ASSEMBLY CLEARANCE.
FREIGHTLINER CORPORATIONView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources