RoadVitals

2003 Pierce Enforcer Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
8
Newest May 30, 2017
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

8 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT

May 30, 2017
225 units potentially affected
The defect: Pierce Manufacturing (Pierce) is recalling certain 1999-2013 Arrow XT, Dash, Enforcer, Quantum and Velocity fire trucks equipped with the electric All-steer rear steering option. The affected vehicles have rear steer axle shafts that were not properly heat treated.
The risk: Axle shafts that are not properly heat treated may break and potentially disable the vehicle, increasing the risk of a crash.
The remedy: Pierce will notify owners, and dealers will replace the rear steer axle shafts, free of charge. An interim notice was mailed on July 24, 2017. The recall began June 3, 2020. Owners may contact Pierce customer service at 1-888-974-3723.
Pierce ManufacturingManufacturer number 74B283View on NHTSA.gov

EQUIPMENT

Oct 22, 2013
3,115 units potentially affected
The defect: Pierce Manufacturing Inc. (Pierce) is recalling certain model year 2000-2009 Enforcer and model year 2000-2010 Dash, Lance, and Arrow XT vehicles. While raising or lowering the cab as part of vehicle maintenance, the mounts on which the cab tilt cylinders pivot may fatigue and fail allowing the cab to fall until the safety catch activates.
The risk: If a person is in the path of the moving cab when a mount fails, the person may be hit by the falling cab, increasing the risk of injury.
The remedy: Pierce will notify owners, and dealers will affix new safety signs advising the operator to stay clear of the cab while it is being tilted, free of charge. The recall began on January 6, 2014. Owners may contact Pierce at 1-920-832-3000. Pierce's recall number is 74B240.
Pierce ManufacturingManufacturer number 74B240View on NHTSA.gov

FUEL SYSTEM, OTHER

Jul 26, 2011
6,803 units potentially affected
The defect: PIERCE HAS DECIDED THAT CERTAIN MODEL YEAR 1995-2008 ARROW XT, DASH, CUSTOM CONTENDER, LANCE, ENFORCER, PIERCE ARROW, QUANTUM, SABER AND COMMERCIAL FIRE TRUCKS MANUFACTURED FROM JANUARY 2, 1995, THROUGH JANUARY 21, 2008, CONTAIN A SAFETY DEFECT. THESE VEHICLES ARE EQUIPPED WITH FUEL TANK STRAPS THAT MAY CORRODE DUE TO WINTER ROAD SALT OR LIQUID DE-ICING CHEMICALS. IF THE FUEL TANK STRAPS CORRODE SUFFICIENTLY, THE FUEL TANK SUPPORTING STRAPS MAY FRACTURE AND THE FUEL TANK MAY FALL FROM THE VEHICLE.
The risk: THE VEHICLES MAY LOSE POWER AND STALL. IN ADDITION, THE FUEL TANK MAY RUPTURE AND SPILL DIESEL FUEL ON THE ROADWAY. EITHER OF THESE OUTCOMES MAY CAUSE A FIRE TRUCK OR SURROUNDING VEHICLES TO SLIP OR SLIDE ON THE ROADWAY SURFACE, INCREASING THE RISK OF A CRASH.
The remedy: FOR FIRE TRUCKS THAT ARE LESS THAN 10 YEARS OLD, DEALERS WILL INSPECT THE FUEL TANK STRAPS AND REPLACE THEM IF NECESSARY WITH STAINLESS STEEL STRAPS FREE OF CHARGE. FOR VEHICLES THAT ARE OLDER THAN 10 YEARS, PIERCE IS NOT OFFERING A FREE REMEDY, BUT WILL OFFER FOR PURCHASE REPLACEMENT FUEL TANKS STRAPS AND PROVIDE INSTRUCTIONS FOR INSTALLATION. THE SAFETY RECALL BEGAN ON AUGUST 27, 2011. OWNERS MAY CONTACT PIERCE AT 1-920-832-3000.
PIERCE MANUFACTURINGManufacturer number 74B218View on NHTSA.gov

VEHICLE SPEED CONTROL:ACCELERATOR PEDAL

Apr 26, 2011
5,022 units potentially affected
The defect: PIERCE IS RECALLING CERTAIN MODEL YEAR 1999-2008 ARROW XT, DASH, LANCE, AND ENFORCER FIRE APPARATUS MANUFACTURED FROM JUNE 22, 1999, THROUGH MAY 12, 2008, AND EQUIPPED WITH AN ELECTRONIC ACCELERATOR PEDAL. AFTER REPEATED USE WITH EXCESSIVE FORCE, THE ACCELERATOR PEDAL ARM MAY BEND AND CAUSE THE PEDAL TO MOVE CLOSER TO THE FLOOR. IF THE PEDAL ARM BENDS FAR ENOUGH, THE PEDAL MAY CONTACT THE CAB FLOOR WITHOUT WARNING AND STICK IN THE FULL THROTTLE POSITION.
The risk: IF THE ACCELERATOR PEDAL BECOMES STUCK, THE OPERATOR MAY LOSE CONTROL OF THE VEHICLE INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL REMOVE THE EXISTING ACCELERATOR ARM AND INSTALL A REDESIGNED PEDAL ARM FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT MAY 9, 2011. OWNERS MAY CONTACT PIERCE AT 1-920-832-3000.
PIERCE MANUFACTURINGManufacturer number 74B215View on NHTSA.gov

STEERING

Sep 21, 2010
2,652 units potentially affected
The defect: PIERCE IS RECALLING CERTAIN MODEL YEAR 1998 THROUGH 2008 ARROW XT, LANCE, VELOCITY, ENFORCER, IMPEL, AND DASH CUSTOM FIRE APPARATUS VEHICLES MANUFACTURED FROM MAY 30, 1998 THROUGH NOVEMBER 25, 2008. THE STEERING GEAR BRACKET MAY FRACTURE AND BREAK. IF THIS OCCURS THE STEERING GEAR MAY DETACH FROM THE VEHICLE.
The risk: DETACHMENT OF THE STEERING GEAR WILL RESULT IN A LOSS OF STEERING CONTROL THAT COULD CAUSE A CRASH.
The remedy: PIERCE WILL NOTIFY OWNERS AND DEALERS WILL INSTALL A NEW STEERING GEAR MOUNTING BRACKET FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 12, 2010. OWNERS ARE BEING INSTRUCTED TO INSPECT THE STEERING GEAR BRACKET PRIOR TO EACH TRIP. THE REMEDY TO REPAIR THIS DEFECT IS EXPECTED TO BEGIN NO EARLIER THE JANUARY 31, 2011. OWNERS MAY CONTACT PIERCE AT 1-888-974-3723.
PIERCE MANUFACTURINGManufacturer number 74B207View on NHTSA.gov

STRUCTURE:BODY:BUMPERS

Jun 28, 2010
25 units potentially affected
The defect: PIERCE IS RECALLING CERTAIN MODEL YEAR 2003 THROUGH 2009 CUSTOM CONTENDER, DASH, ENFORCER, IMPEL, LANCE SABER, AND VELOCITY FIRE TRUCKS MANUFACTURED FROM FEBRUARY 20, 2003, THROUGH MARCH 27, 2009. THESE TRUCKS MAY BE EQUIPPED WITH DROP-DOWN FIRE HOSE TRAYS MOUNTED UNDER THE FRONT BUMPER. THE HOSE TRAY LATCH MAY ACCIDENTALLY OPEN WHILE THE VEHICLE IS IN MOTION.
The risk: IF THIS OCCURS THE FIRE HOSE MAY DROP TO THE ROADWAY WITHOUT WARNING. POTENTIAL INJURY TO PEOPLE AND PROPERTY MAY OCCUR. THE SUDDEN HOSE DEPLOYMENT MAY ALSO DISTRACT DRIVERS TRYING TO AVOID THE HOSE AND A CRASH MAY OCCUR.
The remedy: A NEW AND IMPROVED LATCH DESIGN HAS BEEN DEVELOPED AND A NEW HOSE BOX INCORPORATING THE NEW LATCH WILL BE INSTALLED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 4, 2010. OWNER MAY CONTACT PIERCE AT 1-920-832-3000.
PIERCE MANUFACTURINGManufacturer number 39-0139830View on NHTSA.gov
Aug 10, 2005
90 units potentially affected
The defect: CERTAIN FIRE TRUCKS WITH COMMAND CABS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207,"SEATING SYSTEMS." THE RESCUE BODY OFFERINGS DO NOT MEET THE PULL TEST REQUIREMENTS. THE PEDESTAL SEAT WAS MOUNTED BY DRILLING AND TAPPING THE CAB OR BODY FLOOR.
The risk: IN THE EVENT OF A CRASH, THE PEDESTAL SEAT FASTENERS COULD FAIL TO RESTRAIN THE SEAT, INCREASING THE RISK OF INJURY TO THE SEAT OCCUPANT.
The remedy: DEALERS WILL INSPECT THE SEAT PEDESTALS. IF THE SEAT WAS MOUNTED WITH TAPPED FASTENERS, THE FASTENERS WILL BE REMOVED AND A HOLE WILL BE DRILLED TO REPLACE THE MOUNTING FASTENERS WITH 7/16" BOLTS AND NUTS. THE RECALL BEGAN ON AUGUST 19, 2005. OWNERS MAY CONTACT PIERCE AT 920-832-3249.
PIERCE MANUFACTURINGView on NHTSA.gov
Mar 4, 2005
1,600 units potentially affected
The defect: CERTAIN FIRE TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, 'SEATING SYSTEMS.' THE SEAT TETHER RESTRAINS THE SEAT DURING PULL TESTING AS THE SUSPENSION COMPONENTS ARE NOT DESIGNED TO RESTRAIN THE SEAT ON THEIR OWN. THE SUSPENSION SEAT TETHERS ARE TOO LONG.
The risk: THE OCCUPANT WILL EXPERIENCE INSUFFICIENT SUSPENSION SEAT RESTRAINT WHICH COULD LEAD TO PERSONAL INJURY OR DEATH IN THE EVENT OF A CRASH.
The remedy: DEALERS WILL REPLACE SUSPENSION SEAT TETHERS WITH SHORTER TETHERS. THE RECALL BEGAN ON APRIL 11, 2005. OWNERS MAY CONTACT PIERCE AT 1-888-974-3723.
PIERCE MANUFACTURINGView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

EQ11003ClosedInvestigation

Williams Controls Accelerator Pedals

Opened May 12, 2011
Closed Jul 19, 2011

On April 26, 2011, Pierce Manufacturing, Inc. (Pierce) notified the NHTSA that it had decided certain Pierce fire trucks, manufactured between June 22, 1999, and May 12, 2008, contain a safety related defect. Pierce stated that certain model year 1999 through 2008 Arrow XT, Dash, Lance, and Enforcer vehicles contain a Williams Controls, Inc. (Williams Controls) suspended electronic accelerator pedal that may become bent after repeated use with excessive force. If the pedal arm bends far enough, the pedal may contact the cab floor without warning and stick in the full throttle position. If the accelerator pedal becomes stuck, the operator may lose control of the vehicle increasing the risk of a crash. This issue was assigned recall number 11V-255.On May 12, 2011, RMD mailed an information request (IR) letter to Williams Controls requesting a list of customers who purchased the same or similar defective accelerator pedals.Williams Controls responded to RMD's IR letter on June 9, 2011 with a list those companies who purchased the same accelerator pedal.The list was submitted to NHTSA's Office of the Chief Counsel under a request for confidentiality.Williams Controls' response letter outlined several key points.First, it was noted that these pedals, item number 131507, are generic parts that are purchased by engineering staffs in accordance with their own specifications.According to Williams Controls, Pierce modified their purchased pedals post-purchase and this modification reduced the strength of the accelerator pedal assembly.Also, Williams Controls stated that it has, never had a warranty claim or other notice, other than by Pierce on their modified pedal, due to lever arm permanent deformation for item number 131507.While Williams Controls submitted a list of companies that purchased item number 131507, it noted that it did not sell the same or similar defective pedal assemblies to any company as the subject pedals were modified by Pierce.This Equipment Query is satisfied as, because of modifications not conducted by the pedal manufacturer, the same or similar pedals were not sold to other vehicle manufacturers and no other vehicles should be affected.However, RMD will continue to monitor recall activity to see if any similar issues are found in other manufacturers' vehicles.This EQ is closed.

VEHICLE SPEED CONTROL:ACCELERATOR PEDAL

Elsewhere on this vehicle

Data sources