RoadVitals

2008 Pierce Enforcer

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
9
Latest Jan 2, 2019
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
1
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2008 Pierce Enforcer. 9 safety recalls have been issued covering this model year; 1 NHTSA investigation names it; and 31 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

9 campaigns cover this model year

View all 9

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
19V022000

ELECTRICAL SYSTEM:SOFTWARE

Jan 2, 2019
994 units potentially affected
The defect: Pierce Manufacturing (Pierce) is recalling certain 2004-2018 Arrow XT, Dash, Enforcer, Impel, Quantum and Velocity aerial vehicles. The aerial device may unexpectedly rotate to the right when the ladder is being extended.
The risk: If the aerial device moves in an unexpected direction, the ladder may contact an object, such as a building or an electrical wire, increasing the risk of injury.
The remedy: Pierce will notify owners, and dealers will reprogram the aerial control module, free of charge. The recall began February 28, 2019. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B295.
Pierce ManufacturingManufacturer number 74B295View on NHTSA.gov
18V463000

STRUCTURE

Jul 11, 2018
17 units potentially affected
The defect: Pierce Manufacturing (Pierce) is recalling certain 2007-2017 Pierce Velocity, Impel, Arrow-XT, Quantum, and Enforcer emergency response vehicles equipped with 75ft aerial devices with a 21 inch or 28 inch limited retraction bracket. The bracket on the aerial device may detach from the aerial and fall to the ground.
The risk: If the bracket falls, it could strike a person below.
The remedy: Pierce will notify owners, and dealers will install additional hardware to mount the limited retraction bracket, free of charge. The recall began on August 22, 2018. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B290.
Pierce ManufacturingManufacturer number 74B290View on NHTSA.gov
17V348000

POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT

May 30, 2017
225 units potentially affected
The defect: Pierce Manufacturing (Pierce) is recalling certain 1999-2013 Arrow XT, Dash, Enforcer, Quantum and Velocity fire trucks equipped with the electric All-steer rear steering option. The affected vehicles have rear steer axle shafts that were not properly heat treated.
The risk: Axle shafts that are not properly heat treated may break and potentially disable the vehicle, increasing the risk of a crash.
The remedy: Pierce will notify owners, and dealers will replace the rear steer axle shafts, free of charge. An interim notice was mailed on July 24, 2017. The recall began June 3, 2020. Owners may contact Pierce customer service at 1-888-974-3723.
Pierce ManufacturingManufacturer number 74B283View on NHTSA.gov

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.

EQ11003ClosedInvestigation

Williams Controls Accelerator Pedals

Opened May 12, 2011
Closed Jul 19, 2011

On April 26, 2011, Pierce Manufacturing, Inc. (Pierce) notified the NHTSA that it had decided certain Pierce fire trucks, manufactured between June 22, 1999, and May 12, 2008, contain a safety related defect. Pierce stated that certain model year 1999 through 2008 Arrow XT, Dash, Lance, and Enforcer vehicles contain a Williams Controls, Inc. (Williams Controls) suspended electronic accelerator pedal that may become bent after repeated use with excessive force. If the pedal arm bends far enough, the pedal may contact the cab floor without warning and stick in the full throttle position. If the accelerator pedal becomes stuck, the operator may lose control of the vehicle increasing the risk of a crash. This issue was assigned recall number 11V-255.On May 12, 2011, RMD mailed an information request (IR) letter to Williams Controls requesting a list of customers who purchased the same or similar defective accelerator pedals.Williams Controls responded to RMD's IR letter on June 9, 2011 with a list those companies who purchased the same accelerator pedal.The list was submitted to NHTSA's Office of the Chief Counsel under a request for confidentiality.Williams Controls' response letter outlined several key points.First, it was noted that these pedals, item number 131507, are generic parts that are purchased by engineering staffs in accordance with their own specifications.According to Williams Controls, Pierce modified their purchased pedals post-purchase and this modification reduced the strength of the accelerator pedal assembly.Also, Williams Controls stated that it has, never had a warranty claim or other notice, other than by Pierce on their modified pedal, due to lever arm permanent deformation for item number 131507.While Williams Controls submitted a list of companies that purchased item number 131507, it noted that it did not sell the same or similar defective pedal assemblies to any company as the subject pedals were modified by Pierce.This Equipment Query is satisfied as, because of modifications not conducted by the pedal manufacturer, the same or similar pedals were not sold to other vehicle manufacturers and no other vehicles should be affected.However, RMD will continue to monitor recall activity to see if any similar issues are found in other manufacturers' vehicles.This EQ is closed.

VEHICLE SPEED CONTROL:ACCELERATOR PEDAL

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

SB_792

Husky XP pressure transducer troubleshooting procedure for transducer-related performance concerns.

PB_774

SUSPENSION

The TAK-4 design was updated and older styles of TAK-4 can be upgraded. These updates to the torsion bar and torsion bar mounting are recommended but not required.

SB_790

To notify dealers and customers that the engine oil specification listed on certain Federal (FED) Tags for units equipped with PACCAR MX-13 engines may be incorrect, and to ensure proper maintenance practices are followed.

SB_787

This bulletin provides dealer guidance for MCC filter assemblies when the moisture indicator sight glass appears to show a “wet” condition before installation, after installation, or on replacement filter assemblies.

PB_752

Pierce has created a new style bracket that is more tolerant of stress and vibrations created from driving. This new design will allow for a longer in-service life over the old and reduce maintenance of the condenser and condenser components.

SB_768

This bulletin covers the proper procedure for the replacement/installation of grip tape on hose bed grating.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Pierce Enforcer by model year
YearComplaintsRecallsInvestigationsIssue Index
2026010—
2025020—
2024020—
2023040—
2022060—
2021070—
20200100—
2019090—
2018090—
20170100—
20160160—
20150150—
2014060—
2013060—
2012060—
2011050—
2010060—
2009080—
2008Viewing091—
20071111—
2006191—
20050101—
20040101—
2003081—
2002071—
2001071—
2000071—
1999030—
1998010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.