RoadVitals

2007 Pierce Lance Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
7
Newest Oct 1, 2015
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

7 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT; SUSPENSION:FRONT:CONTROL ARM:UPPER BALL JOINT

Oct 1, 2015
910 units potentially affected
The defect: Pierce Manufacturing (Pierce) is recalling certain model year 2006-2007 Arrow XT, Dash, Enforcer, Lance, Impel, and Quantum vehicles manufactured January 1, 2006, to March 31, 2007. In the affected vehicles, tears in the ball joint protective boots may result in contamination of the ball joints.
The risk: The contamination may cause premature ball joint failure and the wheel to disengage from the control arm, increasing the risk of a vehicle crash.
The remedy: Pierce will notify owners, and dealers will inspect the affected vehicles for torn ball joint boots. Pierce will also evaluate the ball joint wear. Ball joints with an unexpected level of wear will be replaced. These repairs will be performed free of charge. The recall began on December 10, 2015. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B267.
Pierce ManufacturingManufacturer number 74B267View on NHTSA.gov

EQUIPMENT

Oct 22, 2013
3,115 units potentially affected
The defect: Pierce Manufacturing Inc. (Pierce) is recalling certain model year 2000-2009 Enforcer and model year 2000-2010 Dash, Lance, and Arrow XT vehicles. While raising or lowering the cab as part of vehicle maintenance, the mounts on which the cab tilt cylinders pivot may fatigue and fail allowing the cab to fall until the safety catch activates.
The risk: If a person is in the path of the moving cab when a mount fails, the person may be hit by the falling cab, increasing the risk of injury.
The remedy: Pierce will notify owners, and dealers will affix new safety signs advising the operator to stay clear of the cab while it is being tilted, free of charge. The recall began on January 6, 2014. Owners may contact Pierce at 1-920-832-3000. Pierce's recall number is 74B240.
Pierce ManufacturingManufacturer number 74B240View on NHTSA.gov

VEHICLE SPEED CONTROL:ACCELERATOR PEDAL

Apr 26, 2011
5,022 units potentially affected
The defect: PIERCE IS RECALLING CERTAIN MODEL YEAR 1999-2008 ARROW XT, DASH, LANCE, AND ENFORCER FIRE APPARATUS MANUFACTURED FROM JUNE 22, 1999, THROUGH MAY 12, 2008, AND EQUIPPED WITH AN ELECTRONIC ACCELERATOR PEDAL. AFTER REPEATED USE WITH EXCESSIVE FORCE, THE ACCELERATOR PEDAL ARM MAY BEND AND CAUSE THE PEDAL TO MOVE CLOSER TO THE FLOOR. IF THE PEDAL ARM BENDS FAR ENOUGH, THE PEDAL MAY CONTACT THE CAB FLOOR WITHOUT WARNING AND STICK IN THE FULL THROTTLE POSITION.
The risk: IF THE ACCELERATOR PEDAL BECOMES STUCK, THE OPERATOR MAY LOSE CONTROL OF THE VEHICLE INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL REMOVE THE EXISTING ACCELERATOR ARM AND INSTALL A REDESIGNED PEDAL ARM FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT MAY 9, 2011. OWNERS MAY CONTACT PIERCE AT 1-920-832-3000.
PIERCE MANUFACTURINGManufacturer number 74B215View on NHTSA.gov

STEERING

Sep 21, 2010
2,652 units potentially affected
The defect: PIERCE IS RECALLING CERTAIN MODEL YEAR 1998 THROUGH 2008 ARROW XT, LANCE, VELOCITY, ENFORCER, IMPEL, AND DASH CUSTOM FIRE APPARATUS VEHICLES MANUFACTURED FROM MAY 30, 1998 THROUGH NOVEMBER 25, 2008. THE STEERING GEAR BRACKET MAY FRACTURE AND BREAK. IF THIS OCCURS THE STEERING GEAR MAY DETACH FROM THE VEHICLE.
The risk: DETACHMENT OF THE STEERING GEAR WILL RESULT IN A LOSS OF STEERING CONTROL THAT COULD CAUSE A CRASH.
The remedy: PIERCE WILL NOTIFY OWNERS AND DEALERS WILL INSTALL A NEW STEERING GEAR MOUNTING BRACKET FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 12, 2010. OWNERS ARE BEING INSTRUCTED TO INSPECT THE STEERING GEAR BRACKET PRIOR TO EACH TRIP. THE REMEDY TO REPAIR THIS DEFECT IS EXPECTED TO BEGIN NO EARLIER THE JANUARY 31, 2011. OWNERS MAY CONTACT PIERCE AT 1-888-974-3723.
PIERCE MANUFACTURINGManufacturer number 74B207View on NHTSA.gov

STRUCTURE:BODY:BUMPERS

Jun 28, 2010
25 units potentially affected
The defect: PIERCE IS RECALLING CERTAIN MODEL YEAR 2003 THROUGH 2009 CUSTOM CONTENDER, DASH, ENFORCER, IMPEL, LANCE SABER, AND VELOCITY FIRE TRUCKS MANUFACTURED FROM FEBRUARY 20, 2003, THROUGH MARCH 27, 2009. THESE TRUCKS MAY BE EQUIPPED WITH DROP-DOWN FIRE HOSE TRAYS MOUNTED UNDER THE FRONT BUMPER. THE HOSE TRAY LATCH MAY ACCIDENTALLY OPEN WHILE THE VEHICLE IS IN MOTION.
The risk: IF THIS OCCURS THE FIRE HOSE MAY DROP TO THE ROADWAY WITHOUT WARNING. POTENTIAL INJURY TO PEOPLE AND PROPERTY MAY OCCUR. THE SUDDEN HOSE DEPLOYMENT MAY ALSO DISTRACT DRIVERS TRYING TO AVOID THE HOSE AND A CRASH MAY OCCUR.
The remedy: A NEW AND IMPROVED LATCH DESIGN HAS BEEN DEVELOPED AND A NEW HOSE BOX INCORPORATING THE NEW LATCH WILL BE INSTALLED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 4, 2010. OWNER MAY CONTACT PIERCE AT 1-920-832-3000.
PIERCE MANUFACTURINGManufacturer number 39-0139830View on NHTSA.gov

ENGINE AND ENGINE COOLING

May 7, 2010
827 units potentially affected
The defect: PIERCE IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2010 ARROW XT, DASH, LANCE, QUANTUM, AND VELOCITY EMERGENCY VEHICLES MANUFACTURED FROM DECEMBER 20, 2006, THROUGH FEBRUARY 1, 2010, EQUIPPED WITH DETROIT DIESEL SERIES 60 ENGINES. THE ENGINE MAY SHUT DOWN UNEXPECTEDLY WHEN A DIESEL PARTICULATE FILTER OVER TEMPERATURE CONDITION IS DETECTED.
The risk: UNEXPECTED EMERGENCY VEHICLE ENGINE SHUTDOWN UNDER CERTAIN CONDITIONS COULD HAMPER RESCUE OPERATIONS AND PLACE THE PUBLIC AT RISK.
The remedy: OWNERS WILL BE NOTIFIED BY DETROIT DIESEL AND DETROIT DIESEL WILL REPAIR THE VEHICLES FREE OF CHARGE BY REPROGRAMMING THE ENGINE CONTROL LOGIC TO ILLUMINATE A MALFUNCTION INDICATOR LIGHT WITHOUT REQUESTING ENGINE SHUTDOWN. PLEASE SEE DAIMLER TRUCKS' DEFECT REPORT 10E-005. THE SAFETY RECALL BEGAN ON MAY 28, 2010. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712 OR PIERCE AT 1-920-832-3000.
PIERCE MANUFACTURINGManufacturer number 39-0139830View on NHTSA.gov

STEERING:GEAR BOX:SHAFT PITMAN

Jan 15, 2008
22 units potentially affected
The defect: ON CERTAIN FIRE TRUCKS EQUIPPED WITH TRW STEERING GEARS, MODELS TAS85 AND RCS85, THESE STEERING GEARS CONTAIN POTENTIALLY DEFECTIVE SECTOR SHAFTS WITH AN INCORRECT GEAR TOOTH WHICH MAY INTERFERE WITH THE RACK-PISTON TEETH, RESULTING IN A STICK OR BIND CONDITION.
The risk: THIS CONDITION HAS THE POTENTIAL TO CAUSE THE STEERING GEAR TO STALL AND RESTRICT THE STEERING TURNING ANGLE OF THE VEHICLE WHICH COULD RESULT IN A VEHICLE CRASH.
The remedy: PIERCE IS WORKING WITH TRW TO REPLACE THE DEFECTIVE STEERING GEAR (PLEASE SEE 07E101). THE RECALL BEGAN ON JANUARY 11, 2008. OWNERS ONTACT TRW AT 765-429-1768 OR PIERCE AT 920-832-3249.
PIERCE MANUFACTURINGView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

EQ11003ClosedInvestigation

Williams Controls Accelerator Pedals

Opened May 12, 2011
Closed Jul 19, 2011

On April 26, 2011, Pierce Manufacturing, Inc. (Pierce) notified the NHTSA that it had decided certain Pierce fire trucks, manufactured between June 22, 1999, and May 12, 2008, contain a safety related defect. Pierce stated that certain model year 1999 through 2008 Arrow XT, Dash, Lance, and Enforcer vehicles contain a Williams Controls, Inc. (Williams Controls) suspended electronic accelerator pedal that may become bent after repeated use with excessive force. If the pedal arm bends far enough, the pedal may contact the cab floor without warning and stick in the full throttle position. If the accelerator pedal becomes stuck, the operator may lose control of the vehicle increasing the risk of a crash. This issue was assigned recall number 11V-255.On May 12, 2011, RMD mailed an information request (IR) letter to Williams Controls requesting a list of customers who purchased the same or similar defective accelerator pedals.Williams Controls responded to RMD's IR letter on June 9, 2011 with a list those companies who purchased the same accelerator pedal.The list was submitted to NHTSA's Office of the Chief Counsel under a request for confidentiality.Williams Controls' response letter outlined several key points.First, it was noted that these pedals, item number 131507, are generic parts that are purchased by engineering staffs in accordance with their own specifications.According to Williams Controls, Pierce modified their purchased pedals post-purchase and this modification reduced the strength of the accelerator pedal assembly.Also, Williams Controls stated that it has, never had a warranty claim or other notice, other than by Pierce on their modified pedal, due to lever arm permanent deformation for item number 131507.While Williams Controls submitted a list of companies that purchased item number 131507, it noted that it did not sell the same or similar defective pedal assemblies to any company as the subject pedals were modified by Pierce.This Equipment Query is satisfied as, because of modifications not conducted by the pedal manufacturer, the same or similar pedals were not sold to other vehicle manufacturers and no other vehicles should be affected.However, RMD will continue to monitor recall activity to see if any similar issues are found in other manufacturers' vehicles.This EQ is closed.

VEHICLE SPEED CONTROL:ACCELERATOR PEDAL

Elsewhere on this vehicle

Data sources