RoadVitals

2018 Polaris Slingshot Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
5
Newest Oct 18, 2019
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

5 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

19V750000

ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS

Oct 18, 2019
31,987 units potentially affected
The defect: Polaris Inc. (Polaris) is recalling certain 2015-2019 Slingshot motorcycles. Excessive electrical current may damage the battery fuse holder terminals.
The risk: Damaged terminals may result in the loss of forward and rear lighting, instrument cluster gauges, or power steering assist. Any of these scenarios increase the risk of a crash.
The remedy: Polaris will notify owners, and dealers will inspect the battery fuse block terminals and relocate the 50 amp chassis fuse, free of charge. The recall began October 24, 2019. Owners may contact Polaris customer service at 1-855-863-2284. Polaris's number for this recall is T-19-01.
Polaris Inc.Manufacturer number T-19-01View on NHTSA.gov
19V185000

SEAT BELTS; SEATS

Mar 7, 2019
3,311 units potentially affected
The defect: Polaris Industries, Inc. (Polaris) is recalling certain 2018-2019 Slingshot motorcycles. The driver-seat and passenger-seat seat belt and seat back anchoring bracket may have been improperly welded. Additionally, differences in the seat assembly may prevent proper latching of the seat slider, allowing the driver's seat to move unexpectedly.
The risk: If the seat belt buckle or seat back detach from the seat base, there would be an increased risk of injury in the event of a crash. If the driver's seat unexpectedly moves, it can cause the driver to lose control of the motorcycle, increasing the risk of a crash.
The remedy: Polaris will notify owners, and dealers will inspect the seat belt bracket and seat back welds, and the seat slider latching function. If the weld is missing or incomplete, or if the slider doesn't latch properly, the seat bases will be replaced, free of charge. The recall began April 11, 2019. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-18-01. Note: this recall is an expansion of recall 18V-195.
Polaris Industries, Inc.Manufacturer number T-18-01View on NHTSA.gov
18V531000

SEAT BELTS:FRONT:RETRACTOR

Aug 15, 2018
10,658 units potentially affected
The defect: Polaris Industries, Inc. (Polaris) is recalling certain 2017-2019 Polaris Slingshot S, Slingshot SL, Slingshot GT LE, and Slingshot SLR motorcycles. In the event of a crash, the seatbelt retractor on the side opposite of the impact may separate, preventing the seatbelt from locking.
The risk: In the event of a crash, if the seat belt does not lock, the occupant may not be properly restrained, increasing their risk of injury.
The remedy: Polaris will notify owners, and dealers will install a kit that prevents the retractor from separating in the event of a crash, free of charge. The recall began August 28, 2018. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-18-03.
Polaris Industries, Inc.Manufacturer number T-18-03View on NHTSA.gov
18V321000

SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES

May 16, 2018
4,342 units potentially affected
The defect: Polaris Industries, Inc. (Polaris) is recalling certain 2017-2018 Polaris Slingshot, Slingshot SL, Slingshot SLR, Slingshot SL Icon, and Slingshot GT LE motorcycles. The brake pedals may have been incorrectly installed, allowing the brake pedal to separate from the brake master cylinder.
The risk: If the brake pedal separates from the brake master cylinder, it would cause a loss of braking ability, increasing the risk of a crash.
The remedy: Polaris will notify owners, and dealers will inspect the engagement of the brake pedal retaining clip and reassemble it if necessary, free of charge. The recall began on June 5, 2018. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-18-02.
Polaris Industries, Inc.Manufacturer number T-18-02View on NHTSA.gov
18V195000

SEAT BELTS; SEATS

Mar 26, 2018
24,235 units potentially affected
The defect: Polaris Industries, Inc. (Polaris) is recalling all 2015-2018 Polaris Slingshot motorcycles. The driver-seat and passenger-seat seat belt and seat back anchoring bracket may have been improperly welded. Additionally, differences in the seat assembly may prevent proper latching of the seat slider, allowing the driver's seat to move unexpectedly.
The risk: If the seat belt buckle or seat back detach from the seat base, there would be an increased risk of injury in the event of a crash. If the driver's seat unexpectedly moves, it can cause the driver to lose control of the motorcycle, increasing the risk of a crash.
The remedy: Polaris will notify owners, and dealers will inspect the seat belt bracket and seat back welds, and the seat slider latching function. If the weld is missing or incomplete, or if the slider doesn't latch properly, the seat bases will be replaced, free of charge. The recall began on April 16, 2018. Owners may contact Polaris customer service at 1-855-863-2284. Polaris' number for this recall is T-18-01.
Polaris Industries, Inc.Manufacturer number T-18-01View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE17005ClosedPreliminary Evaluation

Seatbelt Retractor Failure

Opened Sep 18, 2017
Closed Mar 25, 2019

See attached closing resume summary.

SEAT BELTS:FRONT:ANCHORAGELed to recall 18V531000

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .