EQUIPMENT
1994 Pontiac Firebird Recalls
Safety recall campaigns filed with NHTSA that cover this model year
Data refreshed
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govRecall campaigns
3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is
EXTERIOR LIGHTING
FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
What a recall is
- Safety recall
- A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
- Safety investigation
- NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
- Manufacturer communication
- Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Safety investigations
NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.
FUEL TUBE RETAINING CLIP FAILURE
MOST OF THE REPORTS REVIEWED IN THIS INVESTIGATION ARE FIRE INCIDENTS IN WHICH FUEL LEAKAGE HAS BEEN ALLEGED AS THE CAUSE OR THE AREA OF ORIGIN IS CONSISTENT WITH THE ALLEGED DEFECT.THERE IS NO EVIDENCE THAT THE SUBJECT CLIP WAS A FACTOR IN ANY OF THESE FIRE INCIDENTS AND NHTSA TESTING INDICATES THATBROKEN OR DISLODGED RETENTION CLIP DOES NOT RESULT IN SIGNIFICANT MOVEMENT OF THE FUEL LINE BUNDLE TOWARD THE LEFT SECONDARY AIR INJECTION CHECK VALVE.FAILURE OF THE CLIP PLACES THE FUEL LINE BUNDLE ASSEMBLY IN THE SAME CONFIGURATION AS THE 1993 MODEL YEAR LTI VEHICLES.A SAFETY-RELATED DEFECT TREND HAS NOT BEEN IDENTIFIED AT THIS TIME AND FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT NO SAFETY-RELATED DEFECT EXISTS.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.
FUEL TUB RETAINING CLIP FAILURE
OWNERS HAVE REPORTED FAILURES OF THE FUEL TUBE RETENTION CLIP THAT ATTACHES TO THE PLASTIC THROTTLE LINKAGE COVER.ACCORDING TO GM, THE SUBJECT RETENTION CLIP (P/N 12048089) WAS IMPLEMENTED IN PRODUCTION ON OCTOBER 12, 1993, TO ADDRESS A CONCERN WITH INCORRECT ASSEMBLY PLANT FUEL LINE ROUTING.MIS-ROUTED FUEL TUBES MAY FAIL FROM CONTACT WITH A HOT AIR CHECK VALVE, CREATING A FIRE HAZARD IN THE ENGINE COMPARTMENT.GM MAINTAINS THAT NO PROBLEMS SHOULD OCCUR IF THE CLIP IS PROPERLY INSTALLED AND ISN'T MISHANDLED DURING SUBSEQUENT SERVICE OPERATIONS.SOME OWNERS HAVE ALLEGED TO ODI THAT THE SUBJECT CLIP BECOMES BRITTLE OVER TIME AND MAY ALSO PULL FREE OF THE THROTTLE LINKAGE COVER ATTACHMENT HOLE.
Elsewhere on this vehicle
Data sources
- NHTSA Office of Defects Investigation — recall campaigns and safety investigations
Data on this page last refreshed .