RoadVitals

1979 Pontiac Grand Prix Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
5
Newest Oct 24, 2007
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

5 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

07E088000

EQUIPMENT

Oct 24, 2007
121,680 units potentially affected
The defect: CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.
The risk: THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE.
The remedy: HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.
HONEYWELL INTERNATIONAL, INC.View on NHTSA.gov
85V048000

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS

Apr 29, 1985
1,810,000 units potentially affected
The defect: EXCESSIVE ENLARGEMENT OF THE WHEEL CYLINDER PILOT HOLE IN THE REAR BRAKE BACKING PLATE COULD ALLOW THE WHEEL CYLINDER TO ROTATE AND CAUSE LOSS OF BRAKE FLUID. CONSEQUENCE OF DEFECT: A LOSS OF BRAKE FLUID LEADS TO LOSS OF REAR BRAKE ACTION, CREATING THE POTENTIAL FOR AN ACCIDENT. FRONT BRAKES WOULD REMAIN OPERATIONAL.
The remedy: ADD A PART TO PREVENT WHEEL CYLINDER FROM ROTATING.
GENERAL MOTORS CORP.View on NHTSA.gov
84V149000

POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT

Nov 24, 1984
3,100,000 units potentially affected
The defect: REAR AXLE ASSEMBLY MAY HAVE AXLES THAT WERE IMPROPERLY MANUFACTURED. THIS CONDITION MAY RESULT IN SEPARATION OF THE AXLE SHAFT AND WHEEL ASSEMBLY FROM THE VEHICLE.
The remedy: THE DEALER WILL INSPECT THE REAR AXLE TO DETERMINE WHETHER IT WAS MANUFACTURED AT THE BUFFALO PLANT. IF SO, THEY WILL MAKE AXLE MEASUREMENTS AND IF NECESSARY REPLACE OR MODIFY AFFECTED AXLE COMPONENTS WITHOUT CHARGE.
GENERAL MOTORS CORP.View on NHTSA.gov
81V025000

SUSPENSION:REAR

Feb 25, 1981
5,821,160 units potentially affected
The defect: THE BOLTS THAT ATTACH THE LOWER REAR CONTROL ARM TO THE FRAME MAY FRACTURE. THE REAR CONTROL ARM SUPPORTS AND POSITIONS THE REAR AXLE. FRACTURE OF THE BOLTS WOULD ALLOW THE CONTROL ARM TO DROP FREE.
The remedy: BOTH REAR CONTROL ARM ATTACHMENT BOLTS WILL BE REPLACED WITHOUT CHARGE.
GENERAL MOTORS CORP.View on NHTSA.gov
78V246000

SEAT BELTS:FRONT

Nov 9, 1978
33 units potentially affected
The defect: THE INVOLVED VEHICLES CONTAIN SPLIT FRONT BENCH SEATS THAT MAY NOT HAVE THE CORRECT OUTBOARD PORTIONS OF THE LEFT AND RIGHT FRONT SEAT BELTS INSTALLED. THIS CONDITION WILL NOT ALLOW THE SEAT BELTS TO BE BUCKLED AND THEREFORE CONSTITUTES A NON-COMPLIANCE TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES".
GENERAL MOTORS CORP.View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

EA86006ClosedEngineering Analysis

BRAKE BACKING PLATE

Opened Nov 27, 1985
Closed Nov 28, 1988

SUMMARY:GM IS CONDUCTING A VOLUNTARY RECALL CAMPAIGN (85V-048)INVOLVING 2,136,826 VEHICLES. THE RECALL IS LIMITED TO VEHICLES BUILT ATCERTAIN ASSEMBLY PLANTS WHICH, ACCORDING TO GM, OVERTORQUED THE BRAKEPIPE NUT,THEREBY OVERSTRESSING THE WHEEL CYLINDER SUPPORT AREA OF THEBACKING PLATE.ANALYSIS:FRONT BRAKES PROVIDE SUFFICIENT BRAKING FOR PASSENGER CARSIN MOST NON-EMERGENCY SITUATIONS. ALL AFFECTED TRUCKS ARE INCLUDED INTHE CURRENT RECALL.IN MOST CASES THE PROBLEM IS DISCOVERED DURING BRAKEMAINTENANCE.THE RECALL APPEARS TO COVER THOSE GROUPS OF CARS WITH THEHIGHEST FAILURE RATES.STATUS:ANALYZING GM IR RESPONSE AND NEW COMPLAINT DATA. DRAFT CLOSINGREPORT BY 5/15/88.===

SERVICE BRAKES, HYDRAULIC

Elsewhere on this vehicle

Data sources