RoadVitals

2001 Porsche 911 Turbo Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Dec 11, 2020
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

20E091000

SUSPENSION:FRONT:MACPHERSON STRUT

Dec 11, 2020
584 units potentially affected
The defect: Ohlins USA, Inc (Ohlins) is recalling certain Front Struts, part number POS 5N20. These struts were sold as part of Ohlins strut kits part number POZ MN02, intended for installation on 1999-2005 Porsche 911 Carrera 4 and 4S (generation 996), and 2001-2006 Porsche 911 Turbo / Turbo S (generation 996) and kit part number POZ MN05, intended for installation on 2005-2012 Porsche 911 Carrera 4 and 4S (generation 997), and 2006-2013 Porsche 911 Turbo / Turbo S (generation 997). The pin of the strut may experience excessive stress during maximum steering, possibly resulting breakage of the pin.
The risk: If the pin fails, it will cause separation of the strut from the vehicle, affecting vehicle control and increasing the risk of a crash.
The remedy: Ohlins will notify owners, and dealers will request the return of all unsold kits containing the subject part from dealer/distributor inventory for a full refund. All owners who purchased one of the kits (POZ MN02 or POZ MN05) will receive replacement front struts (POS 5N20 or POS 5N21 - These parts are interchangeable), along with new top mount interface solutions, free of charge. The recall began December 22, 2020. Owners may contact Ohlins customer service at 1-800-336-9029.
Tenneco AutomotiveView on NHTSA.gov
01V016000

FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS

Jan 23, 2001
493 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. IT IS POSSIBLE THAT THE FUEL SUPPLY LINE COULD LEAK DUE TO CHAFFING WITH THE INTAKE MANIFOLD AND/OR THE FUEL RETURN LINE COULD LEAK DUE TO CHAFFING WITH A SPRING BAND CLAMP USED TO SECURE A COOLANT LINE.
The risk: THE LEAKING FUEL COULD COME INTO CONTACT WITH THE EXHAUST SYSTEM, INCREASING THE RISK OF A FIRE.
The remedy: DEALERS WILL INSTALL A PROTECTIVE SHEATH ON THE FUEL SUPPLY LINE. IN ADDITION, FOR VEHICLES PRODUCED BETWEEN APRIL 7 AND MAY 22, 2000, THE SPRING BAND CLAMP WILL BE REPLACED WITH A SCREW TYPE HOSE CLAMP AND INSTALLED IN SUCH A WAY THAT IT CANNOT COME INTO CONTACT WITH THE FUEL RETURN LINE. OWNER NOTIFICATION BEGAN FEBRUARY 1, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT PORSCHE AT 1-800-545-8039.
PORSCHE CARS N.A. INC.Manufacturer number A102 - A110View on NHTSA.gov
01V015000

POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE)

Jan 23, 2001
910 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH MANUAL TRANSMISSIONS. IT IS POSSIBLE THAT THE CLUTCH PRESSURE LINE COULD LEAK IN THE AREA OF ITS CONNECTION WITH THE CLUTCH CYLINDER.
The risk: A REDUCTION, OR COMPLETE LOSS, OF THE CLUTCH AND STEERING POWER ASSISTANCE COULD RESULT. IF LEAKING FLUID CONTACTS THE EXHAUST SYSTEM, THERE IS A RISK OF FIRE.
The remedy: DEALERS WILL REPLACE THE CLUTCH PRESSURE LINE AND AN ADDITIONAL SUPPORTING BRACKET WILL BE INSTALLED ON VEHICLES PRODUCED BEFORE OCTOBER 13, 2000. VEHICLES PRODUCED AFTER OCTOBER 13, 2000 HAS A NEW TYPE OF CLUTCH PRESSURE LINE. ON VEHICLES PRODUCED BETWEEN OCTOBER 13 AND NOVEMBER 28, 2000, AN ADDITIONAL SUPPORTING BRACKET WILL BE INSTALLED. OWNER NOTIFICATION BEGAN FEBRUARY 1, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT PORSCHE AT 1-800-545-8039.
PORSCHE CARS N.A. INC.Manufacturer number A102 - A110View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE13009ClosedPreliminary Evaluation

Rapid coolant loss

Opened Apr 26, 2013
Closed Mar 10, 2014

On April 26, 2013, the Office of Defects Investigation (ODI) opened PE13-009 to investigate 10 complaints alleging incidents of sudden coolant loss while traveling on public roadways in certain model year (MY) 2001 through 2007 Porsche 911 vehicles.The complaints alleged that pipe ends joined by epoxy to certain cooling system components may fail suddenly and separate, resulting in large volumes of coolant leakage.The investigation was opened to assess evidence of a design or manufacturing defect in the coolant pipe fittings and any related safety consequences. In response to ODI?s Information Request letter, Porsche identified a manufacturing quality issue with the supplier?s application of adhesive to coolant pipe fittings that resulted in elevated failure rates in approximately 6,800 early production 997 generation vehicles (MY 2007 and early MY 2008).ODI?s analysis of field data showed that the age-adjusted failure rate for these vehicles was approximately six times greater than MY 2001 through 2005 996 generation vehicles and MY 2008 through 2011 997 generation vehicles built after a process improvement for adhesive application was implemented by the supplier.Most of the leak complaints reviewed by ODI did not appear to involve complete separation of the fittings and many were detected when the vehicle was parked.There were no crashes or injuries reported to be related to the alleged defect in any of the subject vehicles.ODI identified two allegations that coolant leakage resulted in loss of control incidents, but neither involved vehicles affected by the assembly process quality issue.A third loss of control allegation involving a vehicle built during the period affected by the supplier process concern is not counted since ODI was unable to contact the owner to confirm the incident.See the full closing resume in the document file for PE13-009 for additional information about the subject cooling system and ODI?s analysis of field data related to the alleged defect. A safety-related defect has not been identified at this time and further use of agency resources does not appear to be warranted.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency will monitor this issue and reserves the right to take further action if warranted by the circumstances.

ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .