RoadVitals

2019 RAM 5500 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
10
Newest Oct 11, 2022
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
1
2 investigations on file

Recall campaigns

10 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS

Oct 11, 2022
26,961 units potentially affected
The defect: Chrysler (FCA US, LLC) is recalling certain 2019-2020 Ram 4500 and 5500 Cab Chassis vehicles. The rear brake hose inside diameter may be too small, which could cause the hose to rupture. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 106, "Brake Hoses."
The risk: A brake hose rupture can cause a loss of braking ability, increasing the risk of a crash.
The remedy: Dealers will replace the rear brake hoses, free of charge. Owner notification letters were mailed April 27, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is ZA5.
Chrysler (FCA US, LLC)Manufacturer number ZA5View on NHTSA.gov

VISIBILITY:WINDSHIELD WIPER/WASHER:LINKAGES

Jan 27, 2022
171,789 units potentially affected
The defect: Chrysler (FCA US, LLC) is recalling certain 2019-2020 Ram 2500 and Ram 3500 vehicles, Ram 3500 Cab Chassis, 4500 Cab Chassis, 5500 Cab Chassis and 3500 Cab Chassis with a gross vehicle weight rating (GVWR) of less than 10,000 lbs. The windshield wiper arms may loosen, possibly causing the wipers to function improperly and reduce the driver's visibility in certain weather conditions.
The risk: Reduced visibility increases the risk of a crash.
The remedy: Dealers will tighten the wiper nuts, free of charge. Owner notification letters were mailed February 15, 2022. This recall is an expansion of recall number 20V-208. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is Z08.
Chrysler (FCA US, LLC)Manufacturer number Z08View on NHTSA.gov

FUEL SYSTEM, DIESEL:DELIVERY:FUEL PUMP

Nov 12, 2021
222,410 units potentially affected
The defect: Chrysler (FCA US, LLC) is recalling certain 2019-2020 Ram 2500, 3500 pickup trucks, and Ram 3500, 4500, and 5500 cab chassis vehicles equipped with Cummins 6.7L Turbo Diesel engines. The High Pressure Fuel Pump (HPFP) may fail, resulting in a sudden engine stall without warning.
The risk: An engine stall increases the risk of a crash.
The remedy: Dealers will replace the HPFP, update the Powertrain Control Module (PCM) software, and inspect and replace additional fuel system components as necessary, free of charge. Interim owner notification letters to inform owners of the safety recall were mailed on January 4, 2022. Owner notification letters were mailed on May 17, 2022. Phase 2 owner notification letters are expected to be mailed on March 2, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is Y78.
Chrysler (FCA US, LLC)Manufacturer number Y78View on NHTSA.gov

ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION

Jun 10, 2021
32,002 units potentially affected
The defect: Chrysler (FCA US, LLC) is recalling certain 2019-2020 Ram 3500, 4500, and 5500 cab chassis vehicles equipped with a Cummins 6.7L High Output engine. The engine calibration software may not warn about low oil volume.
The risk: Low oil can damage the engine, causing an oil leak or a punctured engine block, increasing the risk of a fire.
The remedy: Dealers will update the engine calibration software, free of charge. Owner notification letters were mailed June 25, 2021. Owners may contact FCA US LLC customer service at 1-800-853-1403. FCA US LLC's number for this recall is Y21.
Chrysler (FCA US, LLC)Manufacturer number Y21View on NHTSA.gov

WHEELS:LUGS/NUTS/BOLTS/STUDS

May 27, 2021
447,985 units potentially affected
The defect: Chrysler (FCA US, LLC) is recalling certain 2012-2021 RAM 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles. Incorrect information in the Service and Owner's Manuals may cause the flanged lug nuts to be over-tightened, which could result in a broken wheel stud and possible wheel separation.
The risk: Wheel separation can cause a vehicle crash.
The remedy: Dealers will update the torque specification in the owner's manual and other published service documents. Dealers will also inspect the vehicle's wheel studs, replacing them if necessary, free of charge. Owner notification letters were mailed on November 30, 2021. Campaign Y36 owner notification letters were mailed on November 30, 2021. Campaign Y26 owner notification letters were mailed on December 1, 2021. Owners may contact FCA US customer service at 1-800-853-1403. FCA US's numbers for this recall are Y26 and Y36.
Chrysler (FCA US, LLC)Manufacturer number Y26, Y36View on NHTSA.gov

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS

Jan 26, 2021
4 units potentially affected
The defect: Excellance, Inc (Excellance) is recalling certain 2019-2020 Excellance-modified RAM 4500/5500 vehicles to be equipped with CLASS Suspension Systems. In the affected suspension systems, the rear brake caliper flexible line may have been routed so that it contacts a suspension component, possibly causing excessive wear and a loss of rear brakes.
The risk: A worn rear brake caliper flexible line may cause brake fluid leakage which may result in a partial or complete loss of the rear brakes, increasing the risk of a crash.
The remedy: Excellance will notify owners, and dealers will install a kit to remedy any damage and to prevent any future damage, free of charge. The manufacturer has not yet provided a schedule for recall notification. Owners may contact Excellance customer service at 1-800-882-9799.
Excellance, IncView on NHTSA.gov

SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM:HOSES, LINES/PIPING, AND FITTINGS

Jan 13, 2021
23 units potentially affected
The defect: Braun Northwest (Braun Northwest) is recalling certain 2019-2020 RAM 4500/5500 vehicles equipped with Liquid Spring rear suspension systems. In the affected suspension systems, the rear brake caliper flexible line may have been routed so that it contacts a suspension component, possibly causing excessive wear and a loss of rear brakes.
The risk: A worn rear brake line may leak fluid, resulting in a partial or complete loss of the rear brakes, increasing the risk of a crash.
The remedy: Braun Northwest will notify owners, and dealers will install a repair kit to each rear caliper and modify the rear brake caliper flexible line mounting. Any worn rear brake caliper flexible lines will be replaced as needed, free of charge. The recall began June 8, 2020. Owners may contact Braun Northwest customer service at 1-360-748-0195.
Braun NorthwestView on NHTSA.gov

ELECTRICAL SYSTEM:SOFTWARE; ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION

Aug 27, 2020
32,318 units potentially affected
The defect: Chrysler (FCA US LLC) is recalling certain 2019-2020 Ram 3500, 4500 and 5500 cab chassis built with a Cummins 6.7L High Output engine. Inadequate warmup protection can cause a lack of oil film on the engine connecting rod bearings while the engine is reaching operating temperature. This can result in engine damage and connecting rod failure, which could potentially puncture the engine block.
The risk: A damaged engine block may leak oil, which can contact hot engine or exhaust components, increasing the risk of a fire.
The remedy: Chrysler will notify owners, and dealers will flash the engine calibration software to enhance the engine warm up protection, free of charge. The recall began September 10, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W57.
Chrysler (FCA US LLC)Manufacturer number W57View on NHTSA.gov

SERVICE BRAKES; SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS; SUSPENSION:REAR

May 13, 2020
397 units potentially affected
The defect: LiquidSpring LLC (LiquidSpring) is recalling certain Compressible Liquid Adaptive Suspension Systems (C.L.A.S.S.), part numbers DS135RS3A, DS135RS3AF, DS135RS3-DM, sold for use with 2019-2020 RAM 4500 and 5500 vehicles. In the affected suspension systems, the rear brake caliper flexible line may have been routed so that it contacts a suspension component, possibly causing excessive wear and a loss of rear brakes. As such, these parts fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) number 105, "Hydraulic and Electric Brake Systems."
The risk: A worn rear brake caliper flexible line may cause brake fluid leakage which may result in a partial or complete loss of the rear brakes, increasing the risk of a crash.
The remedy: LiquidSpring has notified the purchasers, and the affected vehicle manufacturers will file recalls to have their dealers inspect the rear brake caliper flexible lines for wear and install a kit to modify the rear brake caliper flexible line mounting, and if necessary, a kit to replace worn brake lines, free of charge. The recall May 13, 2020. Owners may contact LiquidSpring customer service at 1-765-474-7816, extension 1.
LiquidSpring LLCView on NHTSA.gov

FUEL SYSTEM, DIESEL

Jun 27, 2019
499 units potentially affected
The defect: Chrysler (FCA US LLC) is recalling certain 2019 Ram 2500 and 3500 trucks, and 3500, 4500, and 5500 Cab Chassis vehicles equipped with diesel engines. The fuel lines may leak fuel into the engine compartment.
The risk: A fuel leak in the presence of an ignition source increases the risk of a fire.
The remedy: Chrysler will notify owners, and dealers will inspect the fuel lines, replacing them if necessary, free of charge. The recall began July 18, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V76.
Chrysler (FCA US LLC)Manufacturer number V76View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

EA23001OpenEngineering Analysis

High pressure fuel pump failure

Opened Mar 17, 2023

The Office of Defects Investigation (ODI) opened PE21-021 on October 14, 2021, to investigate incidents alleging a stall/loss of motive power as a result of high-pressure fuel pump failures in certain model year (MY) 2019-2020 Ram 2500, 3500, 4500, and 5500 heavy duty trucks equipped with 6.7L Cummins turbodiesel engines. During the investigation, ODI sought to determine if the related defect allegation was limited in scope to the recalled population. After review of information request response materials from both FCA and BMW, NHTSA determined that sufficient information to identify a comprehensive recall population could not be produced by FCA and BMW.During the investigation FCA filed recalls 22V406, 22E048, 22V767, and 22E087 which include vehicles not identified in the initial subject population by ODI. ODI also received recall 21V586, involving loss of motive power due to failed CP4 fuel pumps on certain BMW manufactured vehicles. An information request letter response received from BMW indicated that failed pumps on their vehicles were caused by an interaction between pump internal components and US market diesel fuel, leading to increased slip and eventual particle-generating wear surface. Additional work will be done to identify whether a similar root cause is associated with the FCA recalled population and if similar wear dynamics occur on pumps supplied to vehicle manufacturers other than those included in the recalled population.ODI has upgraded this investigation to an EA in order to 1) determine engineering specifications of internal pump components that are correlated with pump failure leading to loss of motive power or other safety related hazards, 2) identify vehicle populations equipped with alleged defective pump variants, 3) assess if vehicles equipped with alleged defective pump variants result in an unreasonable risk to motor vehicle safety and 4) gather and review any other relevant information related to high pressure fuel pump failure associated with the subject populations of recalls 21V586, 21V880, 21E094, 22V406, 22E048, 22V767, and 22E087.Review of the above information will allow NHTSA to confirm root cause and recall remedy viability, and identify and evaluate vehicle populations equipped with pump components that may pose an unreasonable risk to motor vehicle safety.The ODI reports cited above can be reviewed at: http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID using the following complaint identification numbers: 11257550, 11351441, 11361603, 11361616, 11365300, 11365426, 11365858, 11366401, 11372337, 11373793, 11374797, 11376793, 11377871, 11378173, 11384377, 11386063, 11387018, 11399710, 11402550, 11415339, 11418868, 11418870, 11427075, 11434276, 11436807, 11437226, 11437249, 11437273, 11437292, 11437294, 11437394, 11437399, 11437403, 11437405, 11437423, 11437528, 11437565, 11437579, 11437580, 11437590, 11437679, 11437744, 11437781, 11437842, 11437993, 11438006, 11438008, 11438121, 11438138, 11438155, 11438392, 11438629, 11439359, 11439879, 11440397, 11443030, 11446542, 11448163, 11453556, 11458918, 11460558, 11469337

FUEL SYSTEM, DIESEL:DELIVERY:FUEL PUMPLed to recall 24V957
PE21021ClosedPreliminary Evaluation

High pressure fuel pump failure

Opened Oct 14, 2021
Closed Apr 14, 2023

The Office of Defects Investigation (ODI) opened PE21-021 on October 14, 2021 to investigate allegations of stall/loss of motive power as a result of high pressure fuel pump failures in certain model year (MY) 2019-2020 RAM 2500, 3500, 4500, and 5500 heavy duty trucks equipped with 6.7L Cummins turbodiesel engines.On November 12, 2021, FCA filed vehicle recall 21V-880 and equipment recall 21E-094 on the subject population, identifying an `internally failed component? of the high pressure fuel pump equipped on the 6.7L Cummins Turbodiesel engine that introduced debris into the fuel system potentially causing fuel starvation and consequently an unexpected loss of motive power. Discussions with FCA identified the high pressure fuel pump equipped on these vehicles as the Bosch-supplied CP4. On December 16, 2021, Bosch filed recall 21E-101, stating the pump failure was a consequence of a manufacturer application-specific fuel system design.NHTSA subsequently identified recall 21V-586 involving loss of motive power due to failed CP4 fuel pumps on certain BMW vehicles.As a result of having received multiple recalls related to a common component, from two separate vehicle manufacturers, NHTSA?s focus shifted to determine if the related defect allegation was limited in scope to the recalled population. In early 2022, information request letters were sent to FCA and BMW to determine the root cause and consequentially identify the proper scope of potentially defective vehicles. After ODI received their information request response, FCA filed recalls 22V-406, 22E-048, 22V-767, and 22E-087. During review of information request response materials, NHTSA determined that sufficient information to identify a comprehensive recall population could not be produced by FCA or BMW. On March 17, 2023, this Preliminary Evaluation was upgraded to an Engineering Analysis (EA23-001), expanding the scope to include the Tier-one supplier and any manufacturer who equipped or installed similar high pressure fuel pumps subject to the failures observed in the recall population.The ODI reports cited above can be reviewed at: http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID using the following complaint identification numbers: 11351441, 11361603, 11361616, 11365300, 11365426, 11365858, 11366401, 11372337, 11373793, 11374797, 11376793, 11378173, 11384377, 11386063, 11387018, 11399710, 11402550, 11415339, 11418868, 11418870, 11427075, 11434276, 11436807, 11437226, 11437249, 11437273, 11437292, 11437294, 11437394, 11437399, 11437403, 11437405, 11437423, 11437528, 11437565, 11437579, 11437580, 11437590, 11437679, 11437744, 11437781, 11437842, 11437993, 11438006, 11438008, 11438121, 11438138, 11438155, 11438392, 11438629, 11439359, 11439879, 11440397, 11443030, 11448163, 11458918, 11460558

FUEL SYSTEM, DIESEL:DELIVERY:FUEL PUMP

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .