RoadVitals

1999 Saturn LS

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
0
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
1
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 1999 Saturn LS. 1 NHTSA investigation names it; and 11 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

No recalls in our database for this model year

That does not guarantee a specific vehicle is unaffected — recalls are issued against VINs, and new campaigns are announced regularly. Check a VIN on NHTSA.gov.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.

DP08002ClosedDefect Petition

TIMING CHAIN FAILURE-STALL

Opened Jun 18, 2008
Closed Oct 16, 2008

ON JUNE 6, 2006, ODI OPENED AN INVESTIGATION OF TIMING CHAIN FAILURE RESULTING IN ENGINE STALL WHILE DRIVING WITH NO RESTART IN APPROXIMATELY 20,514 MODEL YEAR (MY) 2001 SATURN L-SERIES VEHICLES EQUIPPED WITH 2.2L ENGINES (L61) BUILT FROM NOVEMBER 2000 THROUGH FEBRUARY 2001 (EA06-009).THE VEHICLES BUILT DURING THOSE MONTHS EXHIBITED HIGHER FAILURE RATES THAN SIMILARLY EQUIPPED VEHICLES BUILT BEFORE AND AFTER.GM INTRODUCED A NEW TIMING CHAIN DESIGN IN PRODUCTION IN MAY 2002.ODI CLOSED ITS INVESTIGATION AFTER GM INITIATED A SAFETY RECALL ON NOVEMBER 7, 2007 (RECALL 07V-519). ON MAY 22, 2008, THE NORTH CAROLINA CONSUMERS COUNCIL (NCCC) SUBMITTED A DEFECT PETITION TO ODI REQUESTING THE EXPANSION OF RECALL 07V-519 TO INCLUDE ALL MY 1999 THROUGH 2003 SATURN L-SERIES VEHICLES WITH 2.2L ENGINES USING THE SAME TIMING CHAIN DESIGN AS THE RECALLED POPULATION.THE PETITION STATES THAT THE NCCC CONTINUES TO RECEIVE COMPLAINTS FROM CONSUMERS THAT HAVE HAD A TIMING CHAIN FAIL IN VEHICLES BUILT OUTSIDE THE PRODUCTION RANGE COVERED BY THE RECALL.THE PETITION ALSO NOTES THAT ODI HAS CONTINUED TO RECEIVE COMPLAINTS.SINCE THE CLOSING OF EA06-009 ODI HAS RECEIVED 80 NEW COMPLAINTS FROM CONSUMERS WHO HAD A TIMING CHAIN FAIL IN A MY 2000 THROUGH 2002 SATURN L-SERIES WITH THE 2.2L ENGINE THAT WERE NOT COVERED BY RECALL 07V-519 AND WERE BUILT PRIOR TO THE TIMING BELT CHANGE IN MAY 2002.THE COMPLAINTS DESCRIBE THE SAME FAILURE MODE AS THE RECALLED POPULATION WHERE THE TIMING CHAIN CAN BREAK SUDDENLY AND WITHOUT WARNING, RESULTING IN ENGINE DAMAGE AND LOSS OF MOTIVE POWER.THE DEFECT PETITION HAS BEEN GRANTED. A PRELIMINARY EVALUATION (PE08-061) HAS BEEN OPENED.

ENGINE AND ENGINE COOLING

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

98-T-18C

ELECTRICAL SYSTEM; EQUIPMENT; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM

This service bulletin revision provides a repair procedure to Remove Debris from Evaporator Case, Disinfect evaporator or Apply Cooling coil coating and install blower motor control module to correct a customer concern of A/C Odor at start-up.

17-NA-073

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

This warranty administration bulletin provides information regarding the field action courtesy transportation policy.

19NA273

ELECTRICAL SYSTEM; EQUIPMENT

This informational bulletin provides information for dealers/technicians on Procedures to Unlock Delco Radio with Theftlock.

Recalls

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

Vehicle Recalls

99-08-51-007F

EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; WHEELS

Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin.

99-08-51-007F

EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; WHEELS

Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Saturn LS by model year
YearComplaintsRecallsInvestigationsIssue Index
2004100
2003000
20024933857.8
20015827861.3
20003826759.4
1999Viewing001

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.