RoadVitals

1995 Saturn Sc Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Newest Mar 12, 1999
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
3 investigations on file

Recall campaigns

2 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

99V045000

SEATS

Mar 12, 1999
138,691 units potentially affected
The defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. SOME FRONT SEAT BACK RECLINER GEAR TEETH MAY WEAR EXCESSIVELY THROUGH REPEATED USE, AND COULD CAUSE THE SEAT BACK TO SLIP PARTIALLY REARWARD WHEN FORCE IS APPLIED.
The risk: IF THIS HAPPENS WHILE THE VEHICLE IS BEING DRIVEN, IT COULD CAUSE A LOSS OF CONTROL, INCREASING THE RISK OF A CRASH.
The remedy: DEALERS WILL REPLACE THE FRONT SEAT RECLINER MECHANISMS.
GENERAL MOTORS CORP.Manufacturer number 99006View on NHTSA.gov
94V217000

POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE)

Nov 8, 1994
20,518 units potentially affected
The defect: THE AUTOMATIC TRANSAXLE PARK LOCK CABLE ASSEMBLY WAS IMPROPERLY ADJUSTED MAKING IT POSSIBLE TO SHIFT FROM THE "PARK" POSITION WITH THE IGNITION KEY REMOVED, OR REMOVE THE IGNITION KEY WITH THE SHIFT LEVER IN A POSITION OTHER THAN "PARK." THIS DOES NOT MEET THE REQUIREMENTS OF FMVSS 114, "THEFT PROTECTION."
The risk: CONSEQUENCE OF NON-COMPLIANCE: UNINTENDED VEHICLE MOVEMENT CAN OCCUR WHICH COULD RESULT IN AN ACCIDENT.
The remedy: CONSUMERS ARE BEING ASKED TO INSPECT THE PARK LOCK CABLE. IF IT DOES NOT PERFORM CORRECTLY, DEALERS WILL MAKE THE NECESSARY ADJUSTMENTS.
GENERAL MOTORS CORP.View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

RQ00005ClosedRecall Query

FRONT SEAT BACK CAN RECLINE OR COLLAPSE

Opened Feb 16, 2000
Closed Aug 19, 2000
SEATS:FRONT ASSEMBLY:RECLINERLed to recall 99V045000
EA95003ClosedEngineering Analysis

CRUISE CONTROL FAILURES

Opened Feb 24, 1995
Closed May 31, 1996

THIS INVESTIGATION DOCUMENTED HTE FUNCTIONAL ABERATIONS THAT HAVE OCCURRED IN THE PERFORMANCE OF THE SUBJECT CRUISE CONTROL SYSTEM.MOST OF THE MALFUNCTIONS INVOLVED FAILURE OF THE SYSTEM TO PROPERLY REGULATE VEHICLE SPEED WHEN ENGAGED, FAILURE OF THE SYSTEM TO ENGAGE, OR SELF-DISENGAGEMENT OF THE SYSTEM. THESE PROBLEMS WERE INVESTIGATED AND STEPS TAKEN BY THE MANUFACTURER TO REMEDY THEIR OCCURRENCES.SERVICE PROCEDURES WERE ISSUED FOR VEHICLES IN USE, AND A DESIGN MODIFICATION MADE FOR NEW VEHICLES.NO CONFIRMED ALLEGATIONS OF FAILURE OF THE SYSTEM TO DISENGAGE UPON COMMAND WERE IDENTIFIED.IMPROVED QUALITY CONTROL PROCEDURES AND DESIGN MODIFICATIONSIN THE SYSTEM WERE UNDERTAKEN TO ENSURE A MORE CONSISTENT LEVEL OF SYSTEM PERFORMANCE.THE DETAILS OF THESE FINDINGS AND THE RESULTING CONCLUSIONS ARE CONTAINED INTHE SUBJECT ENGINEERING ANALYSIS CLOSING REPORT.A SAFETY-RELATED DEFECT TREND WAS NOT IDENTIFIED AT EHIS TIME AND FURTHER USE OF AGENCY RESOURCES DOES NOT CONSTITUTE A FINDING BY NHTSA THAT A SAFETY-RELATED DEFECT DOES NOT EXIST.THE AGENCY WILL TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.

EQUIPMENT
PE94079ClosedPreliminary Evaluation

CRUISE CONTROL FAILURE

Opened Nov 7, 1994
Closed Feb 24, 1995

There is no summary currently available

EQUIPMENT

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .