RoadVitals

2013 Shred-Tech Mds-20GT

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest Jun 24, 2015
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2013 Shred-Tech Mds-20GT. 1 safety recall has been issued covering this model year.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
15V405000

EQUIPMENT:OTHER:LABELS; SUSPENSION:FRONT

Jun 24, 2015
162 units potentially affected
The defect: Shred-Tech Corporation (Shred-Tech) is recalling certain model year 2011-2013 MDS-20GT vehicles manufactured July 1, 2011, to March 1, 2013, 2010-2013 MDS-26GTX vehicles manufactured August 2, 2010, to March 1, 2013, 2013-2015 MDS 1/26 vehicles manufactured April 1, 2013, to May 1, 2015, and 2013-2015 MDS 2/26 vehicles manufactured March 1, 2015, to May 29, 2015. The affected vehicles were built on Hino 258LP and Freightliner M2 106 chassis and are equipped with EPA 2010 Emission Controls. With the EPA controls, the vehicles exceed the front axle Gross Axle Weight Rating (GAWR) specified on the certification label. As such, these vehicles fail to comply with the requirements of 49 CFR Part 567, "Certification."
The risk: If the axle weight on the certification label is exceeded, it can cause poor vehicle handling or front axle failure, increasing the risk of a vehicle crash.
The remedy: Shred-Tech will notify owners, and dealers will install a revised certification label on vehicles built on Freightliner M2 chassis increasing the GAWR to 9,000 pounds, and will modify the wheel base to redistribute the weight on vehicles built on Hino 258LP chassis, free of charge. The recall began on July 30, 2015. Owners may contact Shred-Tech customer service at 1-800-465-3214.
Shred-Tech CorporationView on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Compare model years

Complaint and recall counts across every year of this model

Shred-Tech Mds-20GT by model year
YearComplaintsRecallsInvestigationsIssue Index
2013Viewing010—
2012010—
2011010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.