RoadVitals

2011 Spartan Mm Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
9
Newest Mar 13, 2017
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
1 investigation on file

Recall campaigns

9 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

SUSPENSION:FRONT:CONTROL ARM

Mar 13, 2017
2,783 units potentially affected
The defect: Spartan Motors USA (Spartan) is recalling certain 2011-2017 Gladiator, 2016-2017 MetroStar, 2012-2018 K2, 2011-2018 K3, 2017-2018 K4, and 2011-2017 MM vehicles. The ball joints on the independent front suspension (IFS) modules can loosen and separate, leading to a partial loss of steering.
The risk: A separated ball joint can cause a loss of steering control, increasing the risk of a crash.
The remedy: Spartan will notify owners, and dealers will remove, clean, apply thread locker, and reinstall the properly torqued ball joint, free of charge. The recall began on March 24, 2017. Owners may contact Spartan customer service at 1-800-543-4277. Spartan's number for this recall is 17004.
Spartan Motors USAManufacturer number 17004View on NHTSA.gov

ENGINE AND ENGINE COOLING:EXHAUST SYSTEM

May 17, 2016
2,582 units potentially affected
The defect: Spartan Motors (Spartan) is recalling certain model year 2007-2015 Spartan K3 and MM motorhome chassis manufactured September 21, 2006, to March 23, 2015. In the affected vehicles, the flexible exhaust tube may tear allowing hot exhaust to blow against other components or materials.
The risk: If hot exhaust gas contacts other components or materials, it can increase the risk of a fire.
The remedy: Spartan will notify the motorhome manufacturers that purchased the affected chassis, and Spartan dealers will inspect the alignment of the tubes, correcting them and replacing any that are torn. These repairs will be performed free of charge. The recall began on June 23, 2016. Owners may contact Spartan customer service at 1-517-543-6400. Spartan's number for this recall is 16014. Note: This recall supersedes 15V-554.
Spartan Motors USAManufacturer number 16014View on NHTSA.gov

SUSPENSION:FRONT

Jan 28, 2014
452 units potentially affected
The defect: Spartan Motors Chassis, Inc. (Spartan Chassis) is recalling certain 2010-2014 model year MM motorhome chassis manufactured December 11, 2009, through January 30, 2013, and equipped with a sway bar and model 1253 front suspension. This front suspension design has increased rebound travel which may result in a binding condition of the sway bar end link which could lead to the breaking of the sway bar end links.
The risk: Broken sway bar end links may result in poor vehicle handling, or sway, which increases the risk of a crash.
The remedy: Spartan Chassis will notify owners, and dealers will replace the old end links with new end links and an improved mounting, free of charge. The recall began on March 4, 2014. Customers may contact Spartan Chassis at 1-517-543-6400. Spartan Chassis's number for this recall is 12012.
Spartan Motors, Inc.Manufacturer number 12012View on NHTSA.gov

ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN

Sep 18, 2013
125 units potentially affected
The defect: Spartan Motors Chassis, Inc. (Spartan Chassis) is recalling certain model year 2011-2012 motorhomes manufactured January 28, 2010, through March 12, 2012; and equipped with Cummins ISC engines. The affected vehicles have radiator cooling fans that spin excessively fast resulting in the fan blades breaking without warning.
The risk: If this occurs while the hood is open, a person in the vicinity of the engine could be struck by the blade and injured.
The remedy: Spartan will notify owners, and dealers will repair the vehicles free of charge. The recall began on November 15, 2013. Owners may contact Spartan Chassis at 1-517-543-6400. Spartan Chassis's number for this campaign is 13021.
Spartan Motors, Inc.Manufacturer number 13021View on NHTSA.gov

SERVICE BRAKES, AIR:ANTILOCK

Aug 30, 2013
113 units potentially affected
The defect: Spartan Motor Chassis, Inc. (Spartan) is recalling certain model year 2009-2012 MM, 2011-2014 K2, and 2010-2012 K3 motor home chassis. Due to contact with the steering relay rod, the ABS modulator valve may fracture resulting in air not being applied to the affected wheel end.
The risk: This may increase stopping distance of the vehicle or cause the vehicle to pull to one side. Either condition increases the risk of a crash.
The remedy: Spartan will notify owners and dealers will reorient the ABS modulator valve and install spacers for additional clearance, free of charge. The recall began on September 17, 2013. Owners may contact Spartan at 1-517-543-6400. spartan's recall campaign number is 12008.
Spartan Motors, Inc.Manufacturer number 12008View on NHTSA.gov

VEHICLE SPEED CONTROL

Oct 17, 2011
1,294 units potentially affected
The defect: SPARTAN IS RECALLING CERTAIN MODEL YEAR 2010 AND 2011 INCOMPLETE RECREATIONAL VEHICLE CHASSIS MANUFACTURED FROM JANUARY 4, 2010, THROUGH JANUARY 26, 2011, EQUIPPED WITH AN ELECTRONIC CONTROL MODULE, PART NUMBER 2791-NN2E-001 OR 2791-NN2E-002. WHEN THE BRAKE IS APPLIED, THE CRUISE CONTROL MAY NOT CANCEL. ADDITIONALLY, THESE VEHICLES MAY EXHIBIT AN INADVERTENT, MODERATE INCREASE IN VEHICLE SPEED UNTIL THE VEHICLES REACHES ITS GOVERNED SPEED AFTER THE VEHICLE'S CRUISE CONTROL IS SET.
The risk: IF THE DRIVER ATTEMPTS TO CANCEL THE CRUISE CONTROL BY APPLYING THE BRAKE OR IF THE VEHICLE SPEED INCREASES AND THE DRIVER IS UNAWARE, THEY MAY HAVE REDUCED CONTROL OF THE VEHICLE, INCREASING THE RISK OF A CRASH.
The remedy: SPARTAN WILL NOTIFY OWNERS AND REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 9, 2012. OWNERS MAY CONTACT SPARTAN AT 1-517-543-6400.
SPARTAN CHASSIS, INC.Manufacturer number 11027View on NHTSA.gov

ENGINE AND ENGINE COOLING

Aug 17, 2011
212 units potentially affected
The defect: SPARTAN IS RECALLING CERTAIN MODEL YEAR 2010, 2011, AND 2012 RECREATIONAL VEHICLES, MODELS MM, K2, K3, BUS, FURION, GLADIATOR, AND METRO STAR, MANUFACTURED FROM SEPTEMBER 29, 2010, THROUGH JUNE 20, 2011, EQUIPPED WITH A CUMMINS ISB, ISC, ISL, OR ISX DIESEL ENGINE. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.
The risk: IF THE INLET OR OUTLET SECTIONS DISCONNECT, HOT EXHAUST GASES CAN VENT PRIOR TO EXITING THE TAILPIPE, CREATING THE RISK OF COMBUSTION AND A FIRE. IF BOTH CLAMPS FAIL, THERE IS A RISK IN SOME APPLICATIONS THAT THE DOC/DPF HOUSING MAY DETACH COMPLETELY, CREATING A ROAD HAZARD.
The remedy: SPARTAN IS WORKING WITH CUMMINS TO IDENTIFY AND NOTIFY OWNERS OF THE RECALL CAMPAIGN. REPAIRS WILL BE PERFORMED BY AUTHORIZED CUMMINS DEALERS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 10, 2011. OWNERS MAY CONTACT CUMMINS AT 1-812-377-5000 OR SPARTAN AT 1-800-543-5008 - OPTION 5.
SPARTAN CHASSIS, INC.Manufacturer number 11022View on NHTSA.gov

SERVICE BRAKES, AIR

Aug 11, 2011
313 units potentially affected
The defect: Spartan Motors Chassis, Inc. (Spartan Chassis) is recalling certain 2011 SU and 2011 through 2012 model year MM, K2, and K3 recreational vehicle chassis manufactured from January 28, 2011, through June 28, 2011, equipped with air gauges supplied by Ametek. An incorrect value may have been used in the formula for calculating the sweep angle of the dial. This may have resulted in the accuracy of the gauge varying as much as eleven percent from the cutout pressure as opposed to the maximum allowable of +/- seven percent. Consequently, these chassis fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 121, "Air Brake Systems."
The risk: In a condition where constant braking may be necessary, the air systems may deplete sooner than expected. This could cause the application of the spring brake without warning and may result in a vehicle crash.
The remedy: Spartan Chassis will notify owners and replace the affected guages with compliant ones, free of charge. The recall began on September 12, 2013. Owners may contact Spartan at 1-800-543-4277 - Option 1. Spartan's campagn number is 11018.
Spartan Motors, Inc.Manufacturer number 11018View on NHTSA.gov

STEERING:COLUMN

Jun 28, 2010
340 units potentially affected
The defect: SPARTAN IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2011 RECREATION VEHICLE CHASSIS MANUFACTURED FROM JUNE 17, 2007 THROUGH MARCH 15, 2010 EQUIPPED WITH TRW IGEN3 INTERMEDIATE STEERING COLUMNS. THE WELD AROUND THE IGEN3 STEERING SHAFT TUBE THAT SECURES THE SPLINE TUBE TO THE INTERMEDIATE TUBE MAY BE MISLOCATED (I.E., NOT FULLY OVER THE SEAM CREATED WHEN THE TUBES ARE PRESSED TOGETHER.)
The risk: MISLOCATED WELDS MAY RESULT IN TORSIONAL AND AXIAL STRENGTH FALLING BELOW ACCEPTABLE LEVELS. THIS CONDITION COULD RESULT IN SEPARATION OF THE STEERING COLUMN, LOSS OF STEERING CONTROL AND A VEHICLE CRASH WITHOUT WARNING.
The remedy: SPARTAN WILL NOTIFY OWNERS AND THE VEHICLES WILL BE REPAIRED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 16, 2010. OWNERS MAY CONTACT SPARTAN AT SPARTAN CHASSIS AT 1-800-543-5008 - OPTION 5.
SPARTAN CHASSIS, INC.Manufacturer number 10013View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

PE13028ClosedPreliminary Evaluation

Sway Bar End Link Failure

Opened Aug 26, 2013
Closed Feb 19, 2014

On August 26, 2013, the Office of Defects Investigation (ODI) opened this preliminary evaluation after evaluating a Campaign Service Bulletin (CSB) 12-250-002 (NHTSA ID No. 10051812) issued by Spartan Chassis, Inc.The CSB related to sway bar end link failures on certain motorhome chassis manufactured between April 2, 2009 and January 14, 2013.In response to ODI's information request letter, Spartan conducted a detailed analysis of its claim data related to sway bar end link failures on the subject chassis.Spartan determined that a certain population of model MM motorhome chassis equipped with its model 1253 front suspension were experiencing an increased rate of failure.The population identified incorporated a design change that occurred in late 2009.This change increased the rebound travel of the front suspension resulting in a binding condition that could cause the sway bar end links to fail.A broken sway bar end link can potentially cause poor vehicle handling that could increase the risk of a vehicle crash.Based on the results of their analysis, Spartan decided to issue a defect notice and conduct a safety recall to replace the existing sway bar end links with new units and an improved mounting.Based on Spartan's decision to conduct a safety recall (14V-020), ODI is closing this investigation.

STEERING:LINKAGESLed to recall 14V020000

Elsewhere on this vehicle

Data sources