RoadVitals

2000 Summit AND40

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Latest Jul 11, 2001
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2000 Summit AND40. 2 safety recalls have been issued covering this model year.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

2 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov

WHEELS:HUBCAP/COVER

Jul 11, 2001
31 units potentially affected
The defect: VEHICLE DESCRIPTION: TRAILERS EQUIPPED WITH HUBS PROVIDED BY WEBB WHEEL PRODUCTS. THESE TRUCK TRAILER DISC WHEEL HUBS HAVE DIRECT-MACHINED ANTI-LOCK BRAKING SYSTEMS (ABS), PART NUMBER 2023A. THE ABS TEETH ARE MACHINED INTO THE INNER FACE OF THE HUB BORE, AND THE TEETH ARE MACHINED OFF CENTER FROM THE CENTER OF THE HUB. THE SPEED SENSOR OF THE ABS SYSTEM READS THE TOOTH PATTERN AND SENDS ERRONEOUS SIGNALS TO THE ABS CONTROL UNIT.
The risk: THIS CONDITION CAN CAUSE THE ABS SYSTEM TO CYCLE RAPIDLY AND EXTEND STOPPING DISTANCES DURING AN ABS CONTROLLED BRAKE APPLICATION POSSIBLY RESULTING IN A VEHICLE CRASH.
The remedy: DEALERS WILL REPLACE THE HUBS. WEBB WHEEL IS CONDUCTING THE OWNER NOTIFICATION AND REMEDY FOR THIS CAMPAIGN. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT WEBB WHEEL AT 1-800-633-3256 OR SUMMIT AT 1-800-437-3729.
SUMMIT TRAILER SALES, INC.View on NHTSA.gov

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:SHOES/LININGS

Sep 6, 2000
249 units potentially affected
The defect: VEHICLE DESCRIPTION: FLATBED AND DUMP TRAILERS. THESE VEHICLES UTILIZE GUNITE CORPORATION MODEL 2764 CAST STEEL BRAKE DRUMS AND A COMBINATION OF STEEL OR ALUMINUM WHEELS PRODUCED BY OTHER MANUFACTURERS. THESE DRUMS BEAR DATE CODES BETWEEN "162 99" AND "225 99," INCLUSIVE. A STRESS CRACK IN THE METAL ON THE INSIDE BRAKE DRUM FACE DIAMETER CAN OCCUR, RESULTING IN A COMPLETE SEPARATION FROM THE BRAKE DRUM.
The risk: THIS CONDITION COULD CAUSE A LOSS OF BRAKING CAPABILITY.
The remedy: DEALERS WILL REPLACE ALL OF THE CAST IRON BRAKE DRUMS.
SUMMIT TRAILER SALES, INC.View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.