RoadVitals

1992 Vactor 2103

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Latest Apr 13, 2010
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 1992 Vactor 2103. 2 safety recalls have been issued covering this model year.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

2 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
10V146000

STRUCTURE:BODY

Apr 13, 2010
480 units potentially affected
The defect: VACTOR IS RECALLING CERTAIN MODEL YEAR 1992 THROUGH 2010 MODEL 2103 SEWER CLEANERS MANUFACTURED BETWEEN DECEMBER 1992 AND MARCH 2010. THE HAIR PIN OF THE MOUNTING PIN THAT ATTACHES THE DEBRIS BODY HOIST (DUMP) TO THE SUB-FRAME IS NOT SUFFICIENT TO RETAIN THE MOUNTING PIN FOR THE ENTIRE LIFE EXPECTANCY OF THE VEHICLE.
The risk: IF THE HAIR PIN COMES OUT OF THE RETAINING PIN, THE RETAINING PIN CAN WORK ITSELF OUT OF THE MOUNT. SHOULD THIS OCCUR WHILE THE DUMP BODY IS IN THE UP POSITION, IT COULD TILT OVER BACKWARDS, POSSIBLY INJURING THE OPERATOR OR PERSONNEL NEAR THE VEHICLE.
The remedy: VACTOR WILL NOTIFY OWNERS AND REPLACE THE HAIR PIN WITH A COTTER PIN FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 14, 2010. OWNERS MAY CONTACT VACTOR AT 1-847-622-7069.
VACTOR MANUFACTURINGView on NHTSA.gov
07V364000

STRUCTURE

Aug 16, 2007
344 units potentially affected
The defect: ON CERTAIN SEWER CLEANERS, THERE MAY BE A DEFECT IN THE DEBRIS BODY CYLINDER MOUNT AND SUB-FRAME CROSS TUBE WHERE THE MOUNT ATTACHES THAT COULD RESULT IN A STRUCTURAL FAILURE.
The risk: PERSONNEL NEAR THE SEWER CLEANER COULD BE INJURED AND PROPERTY DAMAGE COULD OCCUR.
The remedy: DEALERS WILL ADD A REINFORCING CROSS TUBE AND CYLINDER MOUNT PLATES WILL BE INSTALLED FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 23, 2007. OWNERS MAY CONTACT VACTOR AT 1-815-672-3171.
VACTOR MANUFACTURINGView on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Compare model years

Complaint and recall counts across every year of this model

Vactor 2103 by model year
YearComplaintsRecallsInvestigationsIssue Index
2010010—
2009010—
2008010—
2007020—
2006020—
2005020—
2004020—
2003020—
2002020—
2001020—
2000020—
1999020—
1998020—
1997020—
1996020—
1995020—
1994020—
1993020—
1992Viewing020—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.