RoadVitals

2008 Vermeer BC2100XL

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Latest Jun 30, 2011
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2008 Vermeer BC2100XL. 2 safety recalls have been issued covering this model year.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

2 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
11V345000

EQUIPMENT

Jun 30, 2011
40 units potentially affected
The defect: VERMEER IS RECALLING CERTAIN MODEL YEAR 2008-2009 BC2100XL TANDEM AXLE BRUSH CLIPPER TRAILERS MANUFACTURED FROM DECEMBER 19, 2007, THROUGH FEBRUARY 9, 2009 AND EQUIPPED WITH A WELDED ASSEMBLY ATTACHED TO THE FRONT OF THE MAINFRAME. THE WELDED ASSEMBLY IS SUBJECT TO HIGH STRESS LEVELS.
The risk: AS A RESULT, THE WELDED ASSEMBLY MAY BEND AND/OR DEVELOP FATIGUE CRACKS INCREASING THE RISK OF PERSONAL INJURY TO THE EQUIPMENT OPERATORS OR ANY BYSTANDERS.
The remedy: FIELD KIT MODIFICATIONS ARE CURRENTLY BEING DEVELOPED AND DEALERS WILL REPLACE THE WELDED ASSEMBLY WITH A NEW DESIGN FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE AUGUST 26, 2011. OWNERS MAY CONTACT VERMEER AT 1-641-628-3141.
VERMEER MANUFACTURING COMPANYView on NHTSA.gov
08V215000

TRAILER HITCHES

May 12, 2008
19 units potentially affected
The defect: VERMEER IS RECALLING 19 MY 2006 AND 2008 BC2100XL TANDEM AXLE BRUSH CHIPPER TRAILERS EQUIPPED WITH AN ADJUSTABLE LENGTH TONGUE TUBE ASSEMBLIES. BENDING AND/OR FATIGUE CRACKING IN THE TONGUE CAN RESULT IN TONGUE FAILURE AND SEPARATION FROM THE TOWING VEHICLE.
The risk: SEPARATION FROM THE TOWING VEHICLE COULD RESULT IN A CRASH.
The remedy: DEALERS WILL REPLACE THE TONGUE TUBE ASSEMBLY. THE RECALL BEGAN ON JUNE 5, 2008. OWNERS MAY CONTACT VERMEER AT 1-641-621-7200.
VERMEER MANUFACTURING COMPANYManufacturer number IK01-1460View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Compare model years

Complaint and recall counts across every year of this model

Vermeer BC2100XL by model year
YearComplaintsRecallsInvestigationsIssue Index
2009010—
2008Viewing020—
2006010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.