RoadVitals

2010 Vermeer R9X12T Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest Jul 8, 2014
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

14V410000

SUSPENSION

Jul 8, 2014
58 units potentially affected
The defect: Vermeer Manufacturing Company (Vermeer) is recalling certain model year 2010-2014 R9X12T trailers manufactured November 28, 2012, to March 21, 2014; R400T trailers manufactured August 27, 2013, to June 16, 2014; and R600HC trailers manufactured October 28, 2013, to April 25, 2014. In the affected drilling fluid reclaimer trailers, the suspension pivot bolts could loosen causing axle separation.
The risk: If the axle separates from the reclaimer, there is an increased risk of a crash.
The remedy: Vermeer will notify owners, and dealers will add welds to secure the suspension pivot bolts, free of charge. The recall began on September 8, 2014. Owners may contact Vermeer customer service at 1-800-829-0051. Vermeer's number for this recall is IK00-3061.
Vermeer Manufacturing CompanyManufacturer number IK00-3061View on NHTSA.gov
13V343000

SERVICE BRAKES, AIR

Aug 5, 2013
30 units potentially affected
The defect: Vermeer Manufacturing Company (Vermeer) is recalling certain model year 2010-2013 R9x12T drilling fluid reclaimer trailers manufactured January 31, 2010, through July 2, 2013. The air brake hose may become pinched or chafed on the axle support plate.
The risk: As a result, the air brake line could become damaged, causing a loss of air pressure to the air brake system and a loss of service brakes or preventing the parking brake from releasing, increasing the risk of a crash.
The remedy: Vermeer will notify owners, and dealers will inspect the air brake hose clearance. If there is insufficient clearance, the rear cross member will be moved, free of charge. The recall began on September 25, 2013. Owners may contact Vermeer at 1-641-628-3141. Vermeer's recall number is IK00-1851.
Vermeer Manufacturing CompanyManufacturer number IK00-1851View on NHTSA.gov
12V425000

SERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGS

Aug 31, 2012
18 units potentially affected
The defect: Vermeer is recalling certain model year 2010-2012 R9X12T drilling fluid reclaimer trailers manufactured from March 01, 2010, through August 03, 2012. Due to interference between the air brake hoses and the frame cross-member at the rear axle, the air brake hose may become pinched or be damaged, resulting in the loss of air pressure to the air brakes.
The risk: A loss of air pressure to the air brakes can result in a loss of service brakes, increasing the risk of a crash.
The remedy: Vermeer will notify owners, and dealers will re-reroute the air brake hose, free of charge. The recall began on September 27, 2012. Owners may contact Vermeer at 641-628-3141.
VERMEER MANUFACTURING COMPANYManufacturer number IK00-1736View on NHTSA.gov
12V291000

STRUCTURE:FRAME AND MEMBERS

Jun 22, 2012
14 units potentially affected
The defect: VERMEER IS RECALLING CERTAIN MODEL YEAR 2010-2012 VERMEER R9X12T TRAILERS BECAUSE OF AN INADEQUATE CLEARANCE BETWEEN THE SLACK ADJUSTER ARM AND THE TRAILER FRAME. AS SUCH, THE AXLE COULD CONTACT THE ARM, BENDING IT. OVERTIME, ONE OR MORE OF THE BRAKES COULD LOSE ITS BRAKING CAPACITY DUE TO THE BENT SLACK ADJUSTER ARM.
The risk: REDUCED BRAKING CAPACITY CAN LEAD TO INCREASED STOPPING DISTANCES AND/OR CRASH.
The remedy: VERMEER WILL NOTIFY OWNERS, AND WILL REPLACE THE AXLE, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 6, 2012. OWNERS MAY CONTACT VERMEER AT 1-641-628-3141.
VERMEER MANUFACTURING COMPANYManufacturer number IK00-1718View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources