RoadVitals

2015 Vermeer TG5000 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Jun 27, 2016
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

16V486000

PARKING BRAKE

Jun 27, 2016
254 units potentially affected
The defect: Vermeer Manufacturing Company (Vermeer) is recalling certain model year 2014-2016 DT6, HG4000, HC6000, HG8000, TG5000, TG7000 and WC2300XL, 2014-2015 TG9000 and 2015-2016 WC2500XL trailers, equipped with certain Bendix SR5 spring brake valves. These valves may have been improperly machined which may cause a delay of application of the spring brakes while parking.
The risk: If there is a delay of the spring brake application, the trailer may roll away after it has decoupled from the tractor, increasing the risk of a crash or injury.
The remedy: Vermeer will contact owners and provide a remedy kit, complete with instructions, to repair any affected SR-5 trailer relay valves, free of charge. Vermeer issued an interim notification to owners on August 19, 2016. The recall began on October 14, 2016. Owners may contact Vermeer Customer Service Department at 1-641-628-3141. Vermeer's number for this recall is IK3350.
Vermeer Manufacturing CompanyManufacturer number IK3350View on NHTSA.gov
16V427000

PARKING BRAKE:CONVENTIONAL:AIR

Jun 13, 2016
11 units potentially affected
The defect: Vermeer Manufacturing Company (Vermeer) is recalling certain model year 2014-2016 TG5000 vehicles manufactured November 23, 2013, to May 23, 2016. The assembly instruction manual for these vehicles called for the wrong slack adjuster pushrod length to be used, and as a result, the pushrod threads may fail, causing the trailer parking brakes to unintentionally engage.
The risk: If the trailer brakes unintentionally engage it would increase the risk of a crash.
The remedy: Vermeer will notify owners, and dealers will reset the air brake pushrod length to the correct dimension, free of charge. The recall began on August 4, 2016. Owners may contact Vermeer customer service at 1-641-628-3141. Vermeer's number for this recall is IK3334.
Vermeer Manufacturing CompanyManufacturer number IK3334View on NHTSA.gov
16V425000

TRAILER HITCHES:FIFTH WHEEL ASSEMBLY

Jun 10, 2016
11 units potentially affected
The defect: Vermeer Manufacturing Company (Vermeer) is recalling certain 2014-2016 TG5000 Tub Grinder trailers manufactured November 23, 2013, to May 23, 2016. The spherical washers used during the assembly of the kingpin may have been installed incorrectly, possibly causing the attaching bolts to fail and therefore the kingpin to detach.
The risk: If the kingpin does not remain properly connected to the trailer, the trailer may detach from the vehicle, increasing the risk of a crash.
The remedy: Vermeer will notify owners, and dealers will inspect and repair the installation of the spherical washers, as necessary, free of charge. The recall began on August 4, 2016. Owners may contact Vermeer customer service at 1-641-628-3141.
Vermeer Manufacturing CompanyView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources