RoadVitals

1978 Volvo F613 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Mar 11, 1981
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

81V030000

LATCHES/LOCKS/LINKAGES

Mar 11, 1981
2,501 units potentially affected
The defect: ON CERTAIN VEHICLES, THE ENDSTOP FOR THE SECONDARY CAB LOCK HOOK MAY EXPERIENCE ABNORMAL WEAR. THIS CAN PREVENT THE HOOK AND LATCHING BRACKET FROM ENGAGING WHEN THE CAB IS POWERED.
The remedy: THE DEALER WILL INSTALL A GUIDE FOR THE SECONDARY CAB LOCK HOOK, AND REPLACE EXISTING HOOK WITH A MODIFIED VERSION FREE OF CHARGE.
VOLVO OF AMERICA CORP.View on NHTSA.gov
80V021000

STEERING: STEERING WHEEL/HANDLE BAR

Feb 26, 1980
350 units potentially affected
The defect: OPERATION UNDER EXTREME CONDITIONS OF HIGH HUMIDITY, SALT AND DIRT CAN CAUSE RUSTING OF THE SPLINED SECTION OF THE UPPER STEERING SHAFT. THIS CAUSES INCREASED STRESSES BETWEEN THE STEERING COLUMN UNIVERSAL JOINT CONNECTION AND THE INPUT SHAFT OF THE STEERING GEAR. CONTINUED OPERATION UNDER THESE CONDITIONS COULD RESULT IN UNACCEPTABLE MOTION OF THE LINKAGES.
The remedy: ALL AFFECTED VEHICLES WILL BE EQUIPPED WITH A GREASE FITTING ON THE SPLINED SECTION OF THE UPPER SIDE OF THE UNIVERSAL JOINT.
VOLVO OF AMERICA CORP.View on NHTSA.gov
78V254000

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER

Nov 20, 1978
426 units potentially affected
The defect: THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH AN INCORRECTLY MANUFACTURED BRAKE MASTER CYLINDER TILTING VALVE. THESE DEFECTIVE TILTING VALVES MAY DEVELOP INTERNAL LEAKAGE WITH MANY BRAKE APPLICATIONS AND CAUSE HYDRAULIC BRAKE PRESSURE LOSS IN ONE OR BOTH VEHICLE BRAKE CIRCUITS.
The remedy: DEALER WILL EQUIP ALL AFFECTED VEHICLES WITH THE CORRECT TILTING VALVES AT NO COST TO OWNER.
VOLVO OF AMERICA CORP.View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources