RoadVitals

2005 Volvo Vn Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Newest Oct 18, 2012
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
3 investigations on file

Recall campaigns

2 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

12V510000

SEAT BELTS

Oct 18, 2012
1,496 units potentially affected
The defect: Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages."
The risk: In the event of a crash, an insufficient seat belt weld may prevent the seat belt from properly restraining the occupant. This increases the risk of injury to the seat occupant.
The remedy: Volvo Trucks of America will notify owners, and dealers will replace the suspected d-ring, free of change. The safety recall began on May 10, 2013. Owners may contact Volvo at 1-336-393-2000.
Volvo Trucks North AmericaManufacturer number RVXX1204View on NHTSA.gov
05V311000

SUSPENSION

Jul 7, 2005
10 units potentially affected
The defect: ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS, EQUIPPED WITH HOLLAND AIR SUSPENSION SYSTEMS, A TRANSVERSE BEAM CASTING MAY FRACTURE UNDER NORMAL LOADS. IF A CASTING BREAKS WHEN THE VEHICLE IS TRAVELING ON A ROADWAY THERE IS THE POTENTIAL FOR PIECES OF THE CASTING TO BECOME PROJECTILES AND THE SUSPENSION?S TRANSVERSE BEAM MAY DROP DOWN LOW ENOUGH TO CONTACT THE ROAD SURFACE.
The risk: THIS WILL CAUSE SPARKS THAT COULD POTENTIALLY IGNITE AND CAUSE A FIRE.
The remedy: DEALERS WILL INSPECT AND REPLACE THE DEFECTIVE TRANSVERSE BEAM ASSEMBLIES. THE RECALL BEGAN ON AUGUST 26, 2005. OWNERS MAY CONTACT VOLVO TRUCKS AT 1-800-528-6586.
VOLVO TRUCKS NORTH AMERICA, INC.Manufacturer number RVXX0503View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

RQ11001ClosedRecall Query

Volvo Sleeper glass de-bonding

Opened May 23, 2011
Closed Jan 20, 2012

ODI opened Recall Query RQ11-001 after a review of EWR Field Reports identified lower bunk window separations on the subject vehicles.Volvo had issued three recalls for sleeper window separations since 2003.Additionally, Volvo had issued two bulletins for sleeper window issues during the same time period.The frequency of related actions led ODI to open this formal investigation.An Information Request (IR) letter was sent to Volvo on 23 June 2011.Volvo responded on 17 August 2011 and then provided updated warranty information on 9 January 2012.Volvo provided production change data and warranty information which was correlated to vehicle build month and failure date.ODI analyzed the data to determine if additional production time frames should have been included in previous recalls.ODI also requested information from its network of fleet owners.The response from this network reaffirmed the accuracy of the updated warranty information.Based on the information and data received, ODI has concluded that all production periods have been appropriately addressed by Volvo's previous recalls and no additional recall action is required at this time.

VISIBILITY:GLASS, SIDE/REAR
EA09003ClosedEngineering Analysis

Drag Link Failure

Opened Jan 15, 2009
Closed Jul 6, 2010

EA09-003 is closed with the submission of Volvo's recall 10V-282 recalling approximately 111,034 Model Year (MY) 1998 through 2005 VN and VNL class 8 trucks.Volvo announced recall 10V-282 in response to NHTSA's recall request letter dated June 3, 2010 (available at NHTSA's web site www.safercar.gov). NHTSA found that these vehicles were designed and manufactured with a TRW ball joint that does not meet the combined performance requirements and foreseeable inspection practices of the U.S. market.The ball joint in the steering system that connects the driver's side steering arm/knuckle to the drag link can fail resulting in a total loss of steering on the vehicle.Volvo changed the size and supplier of the ball joint used on these vehicles starting with the 2006 MY vehicles.The failure rates on the vehicles manufactured with the larger ball joint are significantly less than the subject vehicles.The closing of this investigation does not constitute a finding by ODI that no safety defect exists in the vehicles that are not included in Volvo's recall.ODI will continue to monitor the incidence of drag link failures in other MY Volvo trucks.Note:The recall request letter dated June 3, 2010 associated with this investigation describes 49 incidents of ball joint separation.After a comprehensive review of the data it was discovered that the number of separations that NHTSA was aware of was 41 with a failure rate of 36.9 R/100K.The 41 separations resulted in 23 crash allegations.

STEERING:GEAR BOX:SHAFT PITMANLed to recall 10V282000
PE08053ClosedPreliminary Evaluation

DRAG LINK FAILURE

Opened Sep 12, 2008
Closed Jan 15, 2009

ODI HAS DECIDED TO UPGRADE THIS PE AND CONDUCT FIELD WORK AND TESTING.SUMMARY NUMBERS IN THIS RESUME ARE REPRESENATIVE OF ONLY THE 2005 MODEL YEAR VEHICLES. SEE THE ATTACHED REPORT FOR DETAILS.

STEERING:LINKAGES:DRAG:LINK:CONNECTION

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .