SUSPENSIONON CERTAIN FULL TRAILERS (TANKERS) EQUIPPED WITH TUTHILL TRAILER SUSPENSIONS, MODELS 20/22AR. THE BEAM/AXLE PIVOT CONNECTION JOINT IS MIS-ALIGNED CAUSING EXCESSIVE PLAY WITH THE TRAILER ALLOWING THE TRAILER TO WANDER.
Weld-It Recalls, Complaints & Safety Data
NHTSA safety recalls, owner-reported complaints and investigations, by model and model year · 1960–2001
Overview
Our database holds no NHTSA owner-reported complaints for Weld-It. Our database also holds 4 safety recall campaigns and 1 NHTSA investigation covering at least one Weld-It model year.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Weld-It models
Ordered by total owner-reported complaint volume, which is not a ranking of quality
| Model | Model years | Complaints | Recalls |
|---|---|---|---|
| Tank Trailers | 1983–1985 | 0 | 1 |
| Trailer | 1994–2001 | 0 | 2 |
| Weldit | 1960–1962 | 0 | 1 |
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Complaint totals count a report once for each model year it names; recall totals count a campaign once per model.
Recently issued recalls
The 4 newest campaigns covering a Weld-It vehicle in our database
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govSERVICE BRAKES, AIR:SUPPLY:CHECK VALVEON CERTAIN TRAILERS EQUIPPED WITH SPRING BRAKE CONTROL VALVE ASSEMBLIES. THERE IS A RECESSED AREA ON TOP OF THE VALVE IN WHICH A BRASS GUIDE PIN FITS DOWN INSIDE THE BODY OF THE VALVE AND IS HELD IN PLACE BY A STEEL SNAP RING. THE RECESSED AREA ALLOWS ACCUMULATION OF WATER, DIRT, AND/OR CHEMICALS TO BUILD UP BEHIND THE SNAP RING TO THE POINT WHERE IT WILL NO LONGER CONTAIN THE GUIDE PIN RESULTING IN A FAILURE OF THE AIR VALVE.
SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLYWELD CRACKS AND AXLE FRACTURES COULD OCCUR DUE TO INCOMPATIBILITY OF NEWAY RC 122 SUSPENSION AND ROCKWELL AXLES.
SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY
Browse by model year
Every year with at least one publishable Weld-It model year
Data sources
- NHTSA Office of Defects Investigation — complaints, recalls, investigations and manufacturer communications