RoadVitals

2012 Workhorse W62 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Sep 19, 2014
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

14V574000

ENGINE AND ENGINE COOLING:EXHAUST SYSTEM

Sep 19, 2014
6,481 units potentially affected
The defect: Navistar, Inc. (Navistar) is recalling certain model year 2011-2012 Workhorse W62 Commercial Chassis manufactured June 21, 2010, to October 2, 2012. In the affected vehicles, the weld joining the right hand side exhaust down pipe to the exhaust manifold may fatigue.
The risk: A failure of the weld may allow hot exhaust gases to enter the engine compartment, increasing the risk of a fire.
The remedy: Navistar will notify owners, and dealers will install support brackets on the right and left hand exhaust down pipes and a catalyst spacer bar to prevent swaying. Any cracked down pipes will be replaced. These repairs will be performed free of charge. The recall began on November 17, 2014. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 61401-C.
Navistar, Inc.Manufacturer number 61401-CView on NHTSA.gov
13V512000

SERVICE BRAKES; SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS

Oct 17, 2013
2,016 units potentially affected
The defect: Navistar, Inc. is recalling certain model year 2012 Workhorse Custom Chassis W42 and W62 vehicles, manufactured from July 13, 2012, through October 12, 2012, and equipped with hydraulic brakes. In the affected vehicles, the brake fluid level indicator (FLI) may not properly detect a low brake fluid level situation and warn the driver.
The risk: Without a warning, the driver may be unaware that the brake fluid level is low. A low brake fluid level may reduce the available braking force which could lengthen the required stopping distance and increase the risk of a crash.
The remedy: Navistar has notified owners, and dealers will replace the FLI switch free of charge. Owners may contact Navistar at 1-800-448-7825. Navistar's recall campaign number is 51302-C.
Navistar, Inc.Manufacturer number 51302-CView on NHTSA.gov
13V054000

SERVICE BRAKES; SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER

Feb 20, 2013
3,226 units potentially affected
The defect: Navistar is recalling certain model year 2011-2012 Workhorse Custom Chassis W42 and W62 vehicles, manufactured from July 18, 2011, through July 12, 2012, and equipped with hydraulic brakes. The brake fluid level indicator (FLI) may not properly detect a low brake fluid level situation and warn the driver.
The risk: Without a warning, the driver may be unaware that the brake fluid level is low. A low brake fluid level may reduce the available braking force which could lengthen the required stopping distance and increase the risk of a crash.
The remedy: Navistar will notify owners, and dealers will replace the FLI switch free of charge. The safety recall began on April 26, 2013. Owners may contact Navistar at 1-800-448-7825. Navistar's recall campaign number is 51301-C.
Navistar, Inc.Manufacturer number 51301-CView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources