RoadVitals

2008 Zap Xebra Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest Jul 27, 2012
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER

Jul 27, 2012
691 units potentially affected
The defect: QingQi Group Motorcycle Co. Ltd., through its designated agent ZAP, is recalling all model year 2008 ZAP Xebra motorcycles manufactured from January 1, 2008, through December 31, 2008. These motorcycles do not conform to the requirements of Federal Motor Vehicle Safety Standard No. 122, "Motorcycle Brake Systems." The motorcycles were produced without a separate brake fluid reservoir for each brake circuit, with each reservoir filler opening having its own cover, seal, and cover retention device.
The risk: Without a separate reservoir for each brake, having its own cover, seal, and cover retention device, fluid for one brake circuit may move to the other. If this happens, both reservoirs could lose fluid as a result of a fluid leak in one brake circuit and compromise the stopping ability of the braking system, increasing the risk of a crash.
The remedy: ZAP will notify owners and ZAP will install or send each owner a remedy kit to bring the vehicles into compliance. ZAP has not provided a notification schedule. Owners may contact ZAP Customer Service at 1-800-251-4555.
QINGQI GROUP MOTORCYCLE CO., LTDView on NHTSA.gov

SERVICE BRAKES, HYDRAULIC

May 21, 2012
627 units potentially affected
The defect: QINGQI GROUP MOTORCYCLE CO, LTD, THROUGH ITS DESIGNATED AGENT, ZAP USA, IS RECALLING CERTAIN MODEL YEAR 2008 ZAP XEBRA ALL ELECTRIC MOTORCYCLES MANUFACTURED FROM JANUARY 1, 2008, THROUGH DECEMBER 31, 2008. THESE VEHICLES FAIL TO CONFORM TO THE BRAKING DISTANCE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 122, "MOTORCYCLE BRAKE SYSTEMS."
The risk: THESE VEHICLES TAKE LONGER DISTANCES TO STOP, INCREASING THE RISK OF A VEHICLE CRASH.
The remedy: ZAP, THE DESIGNATED AGENT OF QINGQI GROUP MOTORCYCLE CO, LTD, WILL NOTIFY OWNERS, AND ZAP DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 8, 2012. OWNERS MAY CONTACT ZAP AT 1-707-525-8658.
QINGQI GROUP MOTORCYCLE CO., LTDView on NHTSA.gov

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER

Oct 2, 2009
738 units potentially affected
The defect: QINGQI IS RECALLING 738 MY 2008 ZAP XEBRA MOTORCYCLES MANUFACTURED BETWEEN JANUARY AND DECEMBER 2008. THESE MOTORCYCLES DO NOT CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 122, "MOTORCYCLE BRAKE SYSTEMS." THEY DO NOT HAVE A SEPARATE BRAKE FLUID RESERVOIR FOR THE FRONT AND REAR BRAKES.
The risk: WITHOUT A SEPARATE RESERVOIR FOR EACH BRAKE, HAVING ITS OWN COVER, SEAL, AND COVER RETENTION DEVICE, FLUID FOR ONE BRAKE CIRCUIT MAY MOVE TO THE OTHER. IF THIS HAPPENS, BOTH RESERVOIRS COULD LOOSE FLUID AS A RESULT OF A FLUID LEAK IN ONE BRAKE CIRCUIT AND COMPROMISE THE STOPPING ABILITY OF BOTH BRAKES.
The remedy: ZAP WILL NOTIFY OWNERS AND REPAIR OR REPLACE THE MASTER CYLINDER FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 29, 2010. OWNERS MAY CONTACT ZAP TOLL-FREE AT 1-800-251-4555.
QINGQI GROUP MOTORCYCLE CO., LTDView on NHTSA.gov

SERVICE BRAKES, HYDRAULIC

May 26, 2009
738 units potentially affected
The defect: QINGQI IS RECALLING 738 MY 2008 ZAP XEBRA MOTORCYCLES MANUFACTURED BETWEEN JANUARY AND DECEMBER 2008. THESE MOTORCYCLES DO NOT CONFORM TO THE STOPPING DISTANCE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 122, "MOTORCYCLE BRAKE SYSTEMS."
The risk: THESE MOTORCYCLES REQUIRE LONGER DISTANCES TO STOP THAN THE STANDARD ALLOWS. EXTENDED STOPPING DISTANCES MAY RESULT IN A VEHICLE CRASH.
The remedy: QINGQI WILL NOTIFY OWNERS AND ZAP DEALERS WILL INSPECT AND REPLACE THE BRAKE ROTORS, PADS, MASTER CYLINDERS, AND FRONT TIRE IF NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 21, 2009. OWNERS MAY CONTACT ZAP TOLL-FREE AT 1-800-251-4555.
QINGQI GROUP MOTORCYCLE CO., LTDView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .