2003 Acura Cl Problems

TL* THE CONTACT OWNS A 2003 ACURA CL. THE CONTACT STATED THAT WHILE DRIVING 35 MPH, THE TRANSMISSION FAILED CAUSING A REDUCTION IN ACCELERATION. THE VEHICLE WAS TOWED TO THE DEALER, WHO DIAGNOSED THAT THE TRANSMISSION NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE 107,000.

ACURA CL 3.2 2003 W/ 60K MILES, MAINTAINED ON A REGULAR BASIS EXCEEDING OWNERS MANUAL RECOMMENDATIONS AND DRIVEN CONSERVATIVELY BY A PROFESSIONAL FEMALE: CAR BEING DRIVEN ON HEAVILY TRAFFICKED ROAD NORMALLY, AND VERY ABRUPTLY/SUDDENLY GEARED DOWN TO LOW GEAR FROM HIGH GEAR. VIOLENTLY JERKED AND SHIFTED, CAUSING THE CAR TO INSTANTLY GO FROM AROUND 50 MPH TO ONLY AROUND 10-15 MPH. NO WARNING LIGHTS OR PREVIOUS PROBLEMS. IF CAR HAD BEEN BEING DRIVEN ON THE BUSY, HIGH SPEED INTERSTATE LEAVING SAN FRANCISCO AT 60+ SURROUNDED BY TRAFFIC (LUCKILY HAD JUST EXITED THE INTERSTATE AND WAS ON SECONDARY ROAD), IT COULD EASILY HAVE CAUSED FATAL ACCIDENTS. LUCKILY, I WAS ABLE TO IMMEDIATELY ACCESS A SHOULDER TO PULL OVER. DROVE CAR TO ACURA SERVICE ON SIDE ROAD WITH FLASHERS ON - TOOK NEARLY AN HOUR TO GO 6 MILES. WARNING LIGHT FINALLY CAME ON A HALF MILE FROM THE DEALERSHIP, ALTHOUGH PROBLEM HAD HAPPENED SEVERAL MILES BEFORE AND COULD EASILY HAVE CAUSED MAJOR ACCIDENTS, BASED ON DRIVING SITUATION. ACURA SERVICE DETERMINED THAT TRANSMISSION WAS DEFECTIVE AND REPLACED IT. EVEN THOUGH I LATER LEARNED THAT THE SAME MODEL AND YEAR HAD BEEN PUT UNDER AN EXTENDED WARRANTY AND WAS THE SUBJECT OF A CLASS ACTION LAWSUIT, I HAD NEVER RECEIVED ANY NOTIFICATIONS. FURTHER, I WAS TOLD BY ACURA CORP AND THE DEALERSHIP THAT MY VIN NUMBER WAS NOT PART OF THE PROBLEM/ LAWSUIT AND I WAS REQUIRED TO PAY FOR THE NEW TRANSMISSION, ON THE ACURA WITH 60K MILES THAT WAS IN OTHERWISE EXCELLENT CONDITION.. *TR

I purchased this vehicle in March 2021 and noticed the issue with the transmission the first time I operated the vehicle. There is a grinding sound whenever the transmission is placed in third gear. I brought the car to Acura by Executive in Wallingford, CT at some point in 2021 to enquire about the issue. I was informed by the service advisor that the problem is a known issue but because there is no recall on the issue and the vehicle is out of warranty Acura is not required to resolve it. Recently I came across service bulletin 08-018 and noticed where it stated that after warranty expiration a repair may be eligible for goodwill consideration. I called Acura Customer Service, was given case #15843108, and told to acquire a formal diagnosis from an Acura dealership. The diagnosis from Acura of Berlin in Berlin, CT verified that the symptoms were the result of the faulty transmission as described in the TSB. I submitted this information to Acura Customer Service and was informed on September 29, 2025, that due to the age of the vehicle Acura will not compensate me fully or partially for the repair. In my view, although this is an older vehicle, it has low mileage at 102.000 miles and is therefore expected to be on the road for many years. The transmission only grinds at this point, but it may start to pop out of third gear in the future as described in the TSB. I consider this a safety issue in that the transmission popping out of gear unexpectedly would result in some loss of control of the vehicle. I don't expect Acura to fully compensate me for this repair but in light of this problem being a known and documented issue with this vehicle and all the parts for repair are still available I would expect that Acura would stand by its product and offer to contribute to the total cost of this repair.

TL* THE CONTACT OWNS A 2003 ACURA CL. WHILE DRIVING 45 MPH, THE CONTACT HEARD AN ABNORMAL GRINDING NOISE COMING FROM THE VEHICLE. ALSO, WHILE THE ACCELERATOR PEDAL WAS DEPRESSED, THE VEHICLE SHUT OFF. THE CONTACT PULLED OVER, TURNED THE VEHICLE OFF AND ON, AND IT RESUMED NORMAL OPERATION. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHO DIAGNOSED THE VEHICLE AND DETERMINED THAT THE SENSOR FOR THE DRIVESHAFT THREE AND FOUR GEAR CABLE FAILED AND NEEDED TO BE REPLACED. THE VEHICLE WAS REPAIRED, BUT THE FAILURE RECURRED. THE CONTACT REFERENCED NHTSA CAMPAIGN NUMBER: 04V176000 (POWER TRAIN). THE MANUFACTURER WAS MADE AWARE OF THE FAILURE AND STATED THAT THE VIN WAS NOT INCLUDED IN THE RECALL. THE MANUFACTURER PROVIDED CASE NUMBER: 10011555. THE FAILURE MILEAGE WAS APPROXIMATELY 1,054.

My 2003 3.2cls Acura had an airbag recall in in 2016. My vehicle was supposedly repaired at this time. However, recently my SRS light has been on requiring me to take my car to an Acura dealer. The dealer believes my steering wheel air bag has a faulty air inflator, which they claim is out of warranty and may require me to pay $3000 to repair. I do not understand how the manufacturer of the airbag/inflator can avoid repairing this. Shouldn't an airbag last longer than 8 years? What if everyone had to replace their airbags every eight years?

I have an SRS light illuminated on my dashboard. Upon researching this, it is apparently a sensor issue which, when the light is on, indicates that the sensor in the seat - belt is malfunctioning, and this will keep the air bags from deploying. This of course is a serious safety issue. Also, in reviewing the warranty information, it states that all seat-belt issues are under a lifetime warranty. I'm wondering if you could provide confirmation of this. Thank you, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6) Randal Steadman

TL* THE CONTACT OWNS A 2003 ACURA CL. WHILE DRIVING 45 MPH AND ATTEMPTING TO BRAKE, THE CONTACT FELT A VIBRATION IN THE STEERING WHEEL AND BRAKE PEDAL. THE VEHICLE WAS TAKEN TO FOUR DEALERS. ONE DEALER DIAGNOSED THAT THE BRAKES NEEDED TO BE REPLACED; HOWEVER, THE CONTACT STATED THAT NOTHING FAILED AND SHE DID NOT KNOW WHAT THE CAUSE OF THE FAILURE. ANOTHER DEALER DIAGNOSED THAT THE REAR ROTORS COULD BE WARPED AND NEEDED TO BE REPLACED. THE OTHER TWO DEALERS ALSO DIAGNOSED THAT THERE WAS AN ISSUE WITH THE BRAKES. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE AND STATED THAT THEY COULD NOT ASSIST. THE APPROXIMATE FAILURE MILEAGE WAS 10,000. ..UPDATED 06/21/17 *BF *AS

GOING 5 MPH IN PARKING LOT, COASTING TO A STOP AT END OF AISLE WITH FOOT OFF THROTTLE PEDAL. PUT FOOT ON BRAKE AND THE ENGINE REVVED TO HIGH SPEED. BARELY HELD CAR WITH BRAKE. SHUT OFF IGNITION. CAR RESTARTED FINE. THIS WAS THE SECOND TIME IN A WEEK IT HAD HAPPENED. PREVIOUS INCIDENT WAS ON A RESIDENTIAL STREET COMING TO A STOP AT A STOP SIGN. ACURA DEALER AND ACURA TECHLINE SAY THE PROBLEM CAN'T HAPPEN BECAUSE THE THROTTLE CONTROL IS A HARD CABLE, NO ELECTRONICS INVOLVED.

THE DRIVER'S SIDE HID LIGHT WENT OUT. I PAID TO GET THE BALLAST AND INVERTER REPLACED. LESS THAN 3 WEEKS LATER, THE PASSENGER SIDE WENT OUT; SAME ISSUE. SINCE THEN, I HAVE PERSONALLY TALKED TO 4 PEOPLE WITH THE EXACT SAME STORY. THEY ALSO FIXED THE DRIVER'S LIGHT BUT NOT THE PASSENGER DUE TO THE COST. A SERVICE MAN AT THE ACURA STORE TOLD ME HE HAS A FRIEND WITH THE SAME CAR AS MINE, SAME ISSUE. ALSO, HE HAS HAD "QUITE A FEW CUSTOMERS" GO THRU THE SAME THING. IN, ADDITION, I HAVE SEEN 3 CARS WITH THE PASSENGER HEADLIGHT OUT IN MY AREA. IT SEEMS TO ME THAT IF I HAVE COME ACROSS 12-17 PEOPLE WITH THE SAME HID HEADLIGHT ISSUES WITHIN A 15 MILE RADIUS, AND THIS WAS THE FIRST YEAR THESE LIGHTS WERE INSTALLED, THERE IS OBVIOUSLY A PROBLEM WITH THEM AND THERE SHOULD BE A RECALL. A

THERE ARE TWO SAFETY ISSUES WITH MY 2003 ACURA CL. FIRST, THE HEADLIGHTS ARE FLASHING LIKE A STROBE LIGHT. I REPLACED THE BULB AND IT DID NOT FIX THE PROBLEM. REPLACED THE FUSES AND STILL HAVE THE PROBLEMS. SECOND, THE TRANSMISSION IS FAILING. AFTER SOME RESEARCH, I FOUND OUT THAT THERE WAS A RECALL ON THE TRANSMISSION AND COULD LOCK UP AND CAUSE AN ACCIDENT. AT THE TIME OF THE RECALL, THE FIRST OWNER DID NOT HAVE IT REPLACED. THE DEALERSHIP REPLACED AN ENGINE COOLER TO HELP WITH FRICTION. THIS OBVIOUSLY DID NOT SOLVE THE PROBLEM. THE ENGINE IS JERKING AND ACCELERATING WHEN I AM TRYING TO MAINTAIN A CONSTANT SPEED. I NOTIFIED ACURA AND THE DEALERSHIP WHERE THE CAR WAS PURCHASED. NEITHER ARE WILLING TO COVER THE COST OF THE REPAIR. *TR

I BOUGHT THIS ACURA CL TYPE S 6-SPEED SATURDAY, JAN. 6, 2007. DEALER HAD PUT NEW TIRES ON VEHICLE AS PART OF AN ACURA CERTIFIED USED CAR PROGRAM. ON MONDAY FEB. 5, 2007, I WAS TRAVELING ON BUSINESS LEAVING FROM WORK WITH BAD WEATHER PENDING. CO-WORKER WAS TO DRIVE MY CAR TO MY HOME FOR ME, TO KEEP IN GARAGE. MY CO-WORKER CALLED LESS THAN A MILE FROM WORK INFORMING ME OF SIDEWALL BLOW OUT ON MY DRIVER'S SIDE REAR TIRE, HE HAD ONLY TRAVELED A SHORT DISTANCE WHEN CAR FELT ODD. HE DID NOT HIT ANYTHING. MY CO-WORKER AND MY WIFE GOT THE CAR TO LINDSAY ACURA FOR SERVICE THAT NIGHT. THE NEXT DAY SERVICE CONSULTANT MATT CALLED TO INFORM ME OF TIRE AND RIM DAMAGE HE BELIEVES RESULTED FROM A POTHOLE IMPACT. (CUSTOMER DAMAGE) NOT COVERED BY WARRANTY. THIS COST ME $350.63. I HAVE SEEN THAT THERE IS OTHER SIMILAR COMPLAINTS (FALKEN TIRE). *NM

TRANMISSION FAILURES: 2003 ACURA CL. 1ST INCIDENT WAS AT 3,000 MILES. CAR STALLED AND WAS ACTING UP ON A VERY BUSY FREEWAY IN CA (405 FREEWAY). I WASN'T IN A FAMILIAR AREA WHEN I PULLED OVER. ACURA ROADSIDE ASSISTANCE SAID TO DRIVE TO THE NEAREST DEALERSHIP WHEN I DIDN'T EVEN KNOW WHERE ONE WAS. IT WAS DANGEROUS BUT I ENDED UP MAKING IT TO DEALERSHIP. REPLACED TRANSMISSION AND SOME OTHER FLUIDS AFTER 1 WEEK OF BEING IN THE SHOP. 2ND INCIDENT WAS AT 25K MILES AND NOT EVEN 2 YRS OLD. CAR WAS PULLING I SLOWED DOWN AND HAD A BLOW OUT ON ANOTHER FREEWAY. IT IS IN THE SHOP AS WE SPEAK. THEY HAVE TO REPLACE THE TRANSMISSION AGAIN. I'LL BE WITHOUT MY CAR A WEEK.*AK

ENGINE CRADLE IS TOTALLY BROKEN IN HALF. THE CAR IS UNSAFE TO DRIVE & IT IS ALL I HAVE. ONLY 120,000 MILES ON IT, WAS THIS A DEFECT ON YOUR PART? I NEED HELP. THIS REPAIR INCLUDES REMOVING ENGINE, TRANSMISSION, FROM CAR TO ACCESS ENGINE CRADLE. THE COST IS OVER $1500.00 DOLLARS. I TRULY THOUGHT I WAS BUYING A QUALITY CAR! I HAVE NO IDEA HOW LONG I HAVE BEEN DRIVING THIS HIGHLY UNSAFE VEHICLE OF YOURS!! IT ALSO LURCHES FORWARD AT TIMES WHEN I PRESS ON THE BRAKE. I'M MAKING PAYMENTS ON IT & NOW MUST BORROW AGAIN TO REPAIR THIS CAR. PLEASE GET BACK TO ME ON THIS ASAP.

GOING 5 MPH IN PARKING LOT, COASTING TO A STOP AT END OF AISLE WITH FOOT OFF THROTTLE PEDAL. PUT FOOT ON BRAKE AND THE ENGINE REVVED TO HIGH SPEED. BARELY HELD CAR WITH BRAKE. SHUT OFF IGNITION. CAR RESTARTED FINE. THIS WAS THE SECOND TIME IN A WEEK IT HAD HAPPENED. PREVIOUS INCIDENT WAS ON A RESIDENTIAL STREET COMING TO A STOP AT A STOP SIGN. ACURA DEALER AND ACURA TECHLINE SAY THE PROBLEM CAN'T HAPPEN BECAUSE THE THROTTLE CONTROL IS A HARD CABLE, NO ELECTRONICS INVOLVED.

There is a major issue with the relay under the steering wheel blocking the fuel from the pump going to the engine. This also affects the security system as well as the rack and pinion. The vehicle security turns itself on and off as it pleases, often leaving driver/passengers stranded and sometimes with the alarm not shutting off. This is after having keys re-programmed and most parts replaced for a hefty price tag. Due to this, the vehicle will only start at times. I've seen several similar complaints and taken it to many costly mechanics. I paid $7,000 for this vehicle a couple of years ago but only got to drive it a few times because there is always an issue that can't be fixed.

ACURA SAYS THEY GUARANTEE ALL PARTS OF THE SAFETY BELT FOR THE USE OF A LIFETIME OF THE CAR. CAR HAS 120000 MILES ON IT. I HAVE INTERMITTENT BUCKLING ISSUES AND SRS AIRBAG SWITCH IS BAD INSIDE A SEALED SAFETY BELT. COULD EASILY BE REMEDIED IF IT WASN'T A SEALED UNIT. THEY SAY THEY WON'T FIX IT BECAUSE IT'S A CANADIAN CAR EVEN THOUGH IT'S SPENT 100% OF ITS OWNED LIFE IN THE UNITED STATES. THEY WANT AN EXCESSIVE AMOUNT OF MONEY, OVER $400 TO FIX IT. I FEEL MY SAFETY IS BEING HELD HOSTAGE BY THIS EXCESSIVE AMOUNT AND I CAN'T EVEN DO IT MYSELF BECAUSE MY ELECTRIC SEATS WON'T WORK IF I TRY, ONLY FACTORY SOFTWARE CAN RESET THEM SO THEY WORK. I KNOW THIS IS A KNOWN PROBLEM BUT I DON'T UNDERSTAND WHY I'M BEING DISCRIMINATED AGAINST BECAUSE I HAVE A CANADIAN MADE CAR. I KNOW THEY HAVE TO PASS ALL THE SAME PRODUCTION REGULATIONS FOR SAFETY TO ENTER THE UNITED STATES WHETHER THEY'RE MADE IN CANADA OR HERE. WHAT I'M REALLY HOPING FOR IS THAT THE GOVERNMENT WOULD TRY TO PUT A STOP TO THIS CORPORATE GREED OF ENGINEERING PRODUCTS POORLY AND NOT FOLLOWING THROUGH WITH A FIX AND TRYING TO PROFIT OFF OF PEOPLE THAT DON'T HAVE THAT MUCH MONEY. I WOULD BE WILLING TO PAY FOR THIS FIX IF THEY WOULD PROVIDE IT AT A FAIR PRICE. THE SAFETY BELT PROBABLY COST THEM NO MORE THAN $20 BUT BY THE TIME EVERYONE MAKES THEIR PROFIT AND IT COMES TO ME AND THEN ADD THE LABOR TOGETHER WE'RE OVER $400 TO HAVE MY SAFETY BACK WHEN THEY SAY THAT THEY GUARANTEE THEIR SAFETY BELTS FOR LIFE IN THE UNITED STATES. IT IS IN MY OWNER'S MANUAL, AND YOU CAN FIND THIS INFORMATION ONLINE. I WAS HOPING THAT THEY WOULD BE ISSUED A MAJOR FINE TO MAKE IT SO THEY DON'T TREAT OTHER CUSTOMERS THIS WAY AS WELL. I KNOW THERE ARE PROBABLY REASONS TO SEAL A SAFETY BELT SO THAT IT IS NOT TAMPERED WITH BUT THEY USED TO MAKE SPECIALTY TOOLS SO WE COULD BE ACCESSED EASILY FOR CLEANING AND CHANGING OF THESE INEXPENSIVE SWITCHES.

I AM UNABLE TO OPEN DRIVERS SIDE DOOR FROM INSIDE OR OUTSIDE. CAR STILL LOCKS AND UNLOCKS LIKE NORMAL, SO I DON'T BELIEVE THAT THE ACTUATOR IS AT FAULT. THE CONTROL ARMS FOR BOTH HANDLES ARE INTACT & SEEM TO FUNCTION AS NORMAL. I AM ASSUMING THAT EITHER THE LATCH MECHANISM IS STUCK, JAMMED, OR OTHERWISE DYSFUNCTIONAL. THE VEHICLE WAS STATIONARY WHEN IT HAPPENED, AND THE DOOR ITSELF ISN'T DAMAGED/IMPACTED. I LIVE IN ATLANTA, GA, SO THE LATCH ISN'T FROZEN. I AM AWARE THAT THIS IS AN OLDER MODEL (2003), HOWEVER IN THE PAST I HAVE CLEANED & LUBRICATED THE LATCH/LOCK MECHANISM. IT IS EXTREMELY DIFFICULT TO FIGURE OUT HOW TO FIX THIS PROBLEM WHEN THE DOOR IS UNABLE TO BE OPENED, AND IN THIS MODEL, IT ISN'T POSSIBLE TO COMPLETELY REMOVE DOOR PANEL WITHOUT DAMAGE. IT IS A SAFETY HAZARD TO BE UNABLE TO OPEN 1 OF 2 DOORS, ESPECIALLY BEING THAT IT'S THE DRIVERS SIDE. I HAVE YET TO BE ABLE TO FIND ANYONE KNOWLEDGEABLE OF THIS SITUATION, AND HAVEN'T COME ACROSS ANY SOLUTION ONLINE.

TL* THE CONTACT OWNS A 2003 ACURA CL. THE CONTACT STATED THAT WHEN THE VEHICLE WAS BEING SERVICED, THE TECHNICIAN DISCOVERED THAT THE SUBFRAME WAS RUSTED. THE TECHNICIAN STATED THAT THE SUBFRAME NEEDED TO BE REPAIRED. THE VEHICLE WAS REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS 74,000.

There is a major issue with the relay under the steering wheel blocking the fuel from the pump going to the engine. This also affects the security system as well as the rack and pinion. The vehicle security turns itself on and off as it pleases, often leaving driver/passengers stranded and sometimes with the alarm not shutting off. This is after having keys re-programmed and most parts replaced for a hefty price tag. Due to this, the vehicle will only start at times. I've seen several similar complaints and taken it to many costly mechanics. I paid $7,000 for this vehicle a couple of years ago but only got to drive it a few times because there is always an issue that can't be fixed.

CAR WAS PARKED OUTSIDE DURING SUMMER HEATWAVE. INTERIOR WAS HOT. VEHICLE STARTED WITH HESITATION, RAN FOR A MOMENT, AND THEN STALLED AND FAILED TO START IN THE MIDDLE OF A BUSY INTERSECTION. CRANK, NO START, WAS THE FINAL SYMPTOM. OCCUPANTS WERE NEARLY HIT BY A MEDIUM DUTY TRUCK WHO HAD TROUBLE STOPPING. AFTER THE CAR WAS HAULED TO A SHADY LOCATION, THE INTERIOR COOLED AND IT AGAIN STARTED. SINCE THAT SENTINEL EVENT, THE CAR STALLED OR FAILED TO START 3-4 TIMES-- EACH TIME AFTER BEING PARKED IN THE SUN. TRACED PROBLEM TO A FAILED SOLDER JOINT IN THE PGM-FI MAIN RELAY UNDER THE DASH. IT CONTROLS POWER TO FUEL AND ECU. THE CIRCUIT BOARD WAS NOT DESIGNED TO TOLERATE THE EXPANSION AND CONTRACTION ASSOCIATED WITH TEMP CHANGES IN THE INTERIOR. A QUICK INTERNET SEARCH REVEALS THAT MANY PEOPLE ARE SUFFERING FROM LARGE REPAIR BILLS FOR DIAGNOSTICS AND INAPPROPRIATE REPAIRS BECAUSE THIS IS AN INTERMITTENT PROBLEM. RELAY NEEDS RECALLED! AFFECTS NEARLY EVERY HONDA / ACURA SINCE APPROX. 1998. *TR

Subframe rusted through on the passenger side where the cause is a manufacturer defect of condensation from the air conditioning dripping directly above onto the subframe on the passenger side, which created a perforation of the passenger side subframe. Subframe holds the suspension and steering components together and if the passenger side frame from the manufacter defect were to break traveling at highway speed, the car would loose control and cause accidents. The vehicle was inspected at an independent facility and is ready to be inspected again upon request.

UPON REMOVING MY FRONT RIGHT (PASSENGER SIDE) WHEEL TO CHECK MY BRAKE PADS, I NOTICED THE REAR PORTION OF THE SUB-FRAME (WHICH HOLDS UP THE ENGINE AND TRANSMISSION AS WELL AS THE STEERING RACK AND SWAY BAR) HAD RUSTED AWAY ALLOWING THE SWAY BAR TO COME COMPLETELY LOOSE ON THE RIGHT SIDE. I RESEARCHED THIS PROBLEM AND FOUND THAT MANY LATE 1990S AND EARLY 2000 HONDA/ACURA MODELS (PRIMARILY HONDA ACCORDS, ACURA TL AND CL MODELS) HAD THIS ISSUE DUE TO THE POORLY DESIGNED AIR-CONDITIONING CONDENSER DRAIN THAT DRAINED RIGHT ON TOP OF THIS PART, CAUSING AN EXTREME RUST CONDITION. (THE LEFT (DRIVER'S) SIDE OF THIS PART STILL LOOKS LIKE NEW AND IS SOUND) IF I HAD NOT FOUND THIS EXTREMELY DANGEROUS SITUATION, IT MAY HAVE CAUSED A LOSS OF STEERING CONTROL RESULTING IN A POTENTIALLY SERIOUS ACCIDENT. I FEEL THAT THESE CARS SHOULD BE SUBJECT TO A RECALL. I AM IN THE PROCESS OF HAVING THIS PART REPLACED (A REPAIR OF THIS PART IS NOT POSSIBLE, IT MUST BE A FULL REPLACEMENT), I WILL RETAIN THE REMOVED PART FOR INSPECTION AFTER REMOVAL SHOULD YOU DESIRE TO SEE IT. I HAVE ATTACHED SOME PHOTOS SHOWING THE DETERIORATION AS BEST I COULD. (I'M SORRY THE PHOTOS ARE NOT BETTER, IT'S A DIFFICULT AREA TO REACH WITH A CAMERA)

I HAVE A 2003 ACURA CL S TYPE AT 400 MILES A TIRE WAS MICHELIN TIRE WAS REPLACED FOR A BUBBLE IN THE TIRE WALL, THE CAR IS LESS THAN A YEAR OLD AND WITH 11,000 MILES. I HAVE REPLACE TWO MORE TIRES FOR BUBBLES. NOW A FOURTH TIRE HAS A BUBBLE. I AM TOLD BY ACURA AND MICHELIN THAT THESE ARE CAUSED BY POT HOLES. THERE IS NO RIM DAMAGE AND I WAS TOLD BY COSTCO THAT THIS IS A BIG PROBLEM WITH THIS TYPE ACURA BECAUSE OF SUSPENSION. THIS IS NOT SAFE, SOME BUBBLES ARE ON INSIDE WALLS AND CAN NOT BE SEEN. I DON'T BELIEVE ANY TESTING WAS DONE. THIS TIRE SHOULD BE OUTLAWED. NO ONE WANTS TO TAKE RESPONSIBILITY AND I CAN NOT AFFORD TO REPLACE TIRES EVERY MONTH THESE TIRE ARE BRAND NEW AND MICHELIN IS MAKING A TON OF MONEY. I HAVE READ MANY COMPLAINTS WHERE PEOPLE HAVE CRASHED. I WOULD LIKE TO AVOID THIS....I WOULD LIKE EITHER MICHELIN OR ACURA TO ADDRESS THIS PROBLEM OR I WOULD LIKE TO GET OUT OF MY LEASE SINCE I WAS NOT AWARE OF THE UNSAFE CONDITION OF MY VEHICLE. *AK *JB

FRONT DRIVERS SIDE TIRE CAME UNSEATED FROM THE RIM AND JERKED THE CAR OFF THE ROAD AT 55 MPH AND INTO A DITCH. *LA

There is a major issue with the relay under the steering wheel blocking the fuel from the pump going to the engine. This also affects the security system as well as the rack and pinion. The vehicle security turns itself on and off as it pleases, often leaving driver/passengers stranded and sometimes with the alarm not shutting off. This is after having keys re-programmed and most parts replaced for a hefty price tag. Due to this, the vehicle will only start at times. I've seen several similar complaints and taken it to many costly mechanics. I paid $7,000 for this vehicle a couple of years ago but only got to drive it a few times because there is always an issue that can't be fixed.

Subframe rusted through on the passenger side where the cause is a manufacturer defect of condensation from the air conditioning dripping directly above onto the subframe on the passenger side, which created a perforation of the passenger side subframe. Subframe holds the suspension and steering components together and if the passenger side frame from the manufacter defect were to break traveling at highway speed, the car would loose control and cause accidents. The vehicle was inspected at an independent facility and is ready to be inspected again upon request.

I have an SRS light illuminated on my dashboard. Upon researching this, it is apparently a sensor issue which, when the light is on, indicates that the sensor in the seat - belt is malfunctioning, and this will keep the air bags from deploying. This of course is a serious safety issue. Also, in reviewing the warranty information, it states that all seat-belt issues are under a lifetime warranty. I'm wondering if you could provide confirmation of this. Thank you, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6) Randal Steadman

ACURA SAYS THEY GUARANTEE ALL PARTS OF THE SAFETY BELT FOR THE USE OF A LIFETIME OF THE CAR. CAR HAS 120000 MILES ON IT. I HAVE INTERMITTENT BUCKLING ISSUES AND SRS AIRBAG SWITCH IS BAD INSIDE A SEALED SAFETY BELT. COULD EASILY BE REMEDIED IF IT WASN'T A SEALED UNIT. THEY SAY THEY WON'T FIX IT BECAUSE IT'S A CANADIAN CAR EVEN THOUGH IT'S SPENT 100% OF ITS OWNED LIFE IN THE UNITED STATES. THEY WANT AN EXCESSIVE AMOUNT OF MONEY, OVER $400 TO FIX IT. I FEEL MY SAFETY IS BEING HELD HOSTAGE BY THIS EXCESSIVE AMOUNT AND I CAN'T EVEN DO IT MYSELF BECAUSE MY ELECTRIC SEATS WON'T WORK IF I TRY, ONLY FACTORY SOFTWARE CAN RESET THEM SO THEY WORK. I KNOW THIS IS A KNOWN PROBLEM BUT I DON'T UNDERSTAND WHY I'M BEING DISCRIMINATED AGAINST BECAUSE I HAVE A CANADIAN MADE CAR. I KNOW THEY HAVE TO PASS ALL THE SAME PRODUCTION REGULATIONS FOR SAFETY TO ENTER THE UNITED STATES WHETHER THEY'RE MADE IN CANADA OR HERE. WHAT I'M REALLY HOPING FOR IS THAT THE GOVERNMENT WOULD TRY TO PUT A STOP TO THIS CORPORATE GREED OF ENGINEERING PRODUCTS POORLY AND NOT FOLLOWING THROUGH WITH A FIX AND TRYING TO PROFIT OFF OF PEOPLE THAT DON'T HAVE THAT MUCH MONEY. I WOULD BE WILLING TO PAY FOR THIS FIX IF THEY WOULD PROVIDE IT AT A FAIR PRICE. THE SAFETY BELT PROBABLY COST THEM NO MORE THAN $20 BUT BY THE TIME EVERYONE MAKES THEIR PROFIT AND IT COMES TO ME AND THEN ADD THE LABOR TOGETHER WE'RE OVER $400 TO HAVE MY SAFETY BACK WHEN THEY SAY THAT THEY GUARANTEE THEIR SAFETY BELTS FOR LIFE IN THE UNITED STATES. IT IS IN MY OWNER'S MANUAL, AND YOU CAN FIND THIS INFORMATION ONLINE. I WAS HOPING THAT THEY WOULD BE ISSUED A MAJOR FINE TO MAKE IT SO THEY DON'T TREAT OTHER CUSTOMERS THIS WAY AS WELL. I KNOW THERE ARE PROBABLY REASONS TO SEAL A SAFETY BELT SO THAT IT IS NOT TAMPERED WITH BUT THEY USED TO MAKE SPECIALTY TOOLS SO WE COULD BE ACCESSED EASILY FOR CLEANING AND CHANGING OF THESE INEXPENSIVE SWITCHES.

CRUISE CONTROL WOULD NOT HOLD SPEED. EVERYTHING ELSE WAS NORMAL, THE CRUISE CONTROL LIGHT WOULD GO ON. UPON INSPECTION IT WAS FOUND THAT THE THROTTLE CABLE FROM CRUISE CONTROL SEPARATED FROM THE PLASTIC THROTTLE BODY PIECE. IT APPEARS TO HAVE BROKEN. INITIALLY THE DEALER JUST PUT A SMALL CLIP AS A TEMPORARY FIX, BUT IT ONLY LASTED A FEW DAYS. THE CRUISE CONTROL CANNOT ENGAGE AND THE COMPANY REFUSES TO ACCEPT THAT IT IS A MANUFACTURING DEFECT. EVEN THOUGH UPON CLOSER INSPECTION IT CAN BE SEEN THAT THERE IS NO WAY THE PART COULD HAVE BEEN DAMAGED BY SOMEONE HITTING THE PART. IT CAN BE CLEARLY SEEN THAT THE PART INITIALLY DEFORMED DUE TO VARIOUS STRESSES SUCH AS HEAT (BEING CLOSE TO THE MOTOR), AND WEAR. PICTURES AVAILABLE FOR FURTHER EXPLANATION