RoadVitals

2010 Altec DC912A Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Newest Aug 1, 2011
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

2 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

SUSPENSION:REAR:AXLE:SPINDLE

Aug 1, 2011
210 units potentially affected
The defect: ALTEC IS RECALLING CERTAIN MODEL YEAR 2009-2011 DC-912A AND MODEL YEAR 2010 AND 2011 WC126A WOOD CHIPPERS MANUFACTURED FROM JANUARY 2009 THROUGH JULY 2011. FATIGUE FAILURES CAN OCCUR AT THE BEARING GREASE HOLE LOCATED ON THE AXLE SPINDLE.
The risk: THE SPINDLE ON THE AXLE COULD FAIL ALLOWING THE WHEEL TO SEPARATE FROM THE CHIPPER, POSSIBLY RESULTING IN A CRASH.
The remedy: ALTEC WILL NOTIFY OWNERS AND DEALERS WILL REPLACE THE AXLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 17, 2011. OWNERS MAY CONTACT ALTEC AT 1-877-435-9258.
ALTEC INDUSTRIES INC.Manufacturer number MAB 547View on NHTSA.gov

WHEELS:LUGS/NUTS/BOLTS/STUDS

Apr 14, 2011
132 units potentially affected
The defect: AEP IS RECALLING CERTAIN MODEL YEAR 2009-2010 DC912A CHIPPER UNITS MANUFACTURED FROM JANUARY 2009, THROUGH SEPTEMBER 2010, FOR WHEEL LUG NUTS THAT MAY BECOME LOOSE ALLOWING THE WHEEL AND/OR TIRE TO COME OFF WHILE TRAVELING.
The risk: IF THE WHEEL AND TIRE COMES OFF WHILE TRAVELING, DEATH OR SERIOUS INJURY MAY RESULT.
The remedy: AEP WILL REPLACE THE AXLE HUB/DRUMS AND WHEEL RIMS THAT HAVE BEEN REPEATEDLY LOOSE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 20, 2011. OWNERS MAY CONTACT ALTEC AT 1-877-462-5832.
ALTEC ENVIRONMENTAL PRODUCTS, LLCManufacturer number CSN 543View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources