RoadVitals

2023 Altec Digger Derrick Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
11
Newest Jun 26, 2026
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

11 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

EQUIPMENT:MECHANICAL:CARRIER/RACK

Jun 26, 2026
6 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2023-2025 Digger Derrick vehicles. The vertical center of gravity with poles in the pole rack was not calculated properly, resulting in an incorrect pole rack capacity rating.
The risk: While using the pole rack at full capacity, an incorrect high vertical center of gravity during braking and cornering may lead to a loss of vehicle control, increasing the risk of a crash.
The remedy: Altec will provide owners with a safety alert placard, free of charge. Owner notification letters are expected to be mailed August 21, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3335.
Altec Industries, Inc.Manufacturer number CSN-3335View on NHTSA.gov

EQUIPMENT:OTHER:LABELS

Mar 13, 2026
10,875 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2023-2026 Service Body, Aerial Device, Pressure Digger, Spray Truck, and Digger Derrick vehicles. The low tire pressure rating printed on the final stage certification label is incorrect.
The risk: An incorrect pressure rating may lead to underinflated tires, increasing the risk of a tire blowout or a crash.
The remedy: Altec will inspect and replace the incorrect certification label, free of charge. Owner notification letters were mailed May 11, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3294.
Altec Industries, Inc.Manufacturer number CSN-3294View on NHTSA.gov

ELECTRICAL SYSTEM:WIRING:POWER DISTRIBUTION MODULE/IPDM

Feb 6, 2026
57 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2021-2025 Digger Derrick and 2021-2025 AM Series Aerial Device vehicles. The chassis engine may start unintentionally due to a missing diode in the Altec power distribution module.
The risk: An engine that starts unexpectedly increases the risk of injury to anyone near the engine compartment during maintenance operations.
The remedy: Altec will provide instructions to inspect the power distribution module for a diode, and provide a repair kit as necessary, free of charge. Owner notification letters were mailed March 27, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3281.
Altec Industries, Inc.Manufacturer number CSN-3281View on NHTSA.gov

ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS; EXTERIOR LIGHTING:TAIL LIGHTS

Dec 18, 2025
152 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2023-2025 Aerial Device and Digger Derrick vehicles. The electronic taillight module harness may have inadequate circuit protection.
The risk: Wiring without adequate protection may short circuit, increasing the risk of a fire.
The remedy: Altec will provide instructions on inspecting and updating the circuit as necessary, free of charge. Owner notification letters were mailed February 13, 2026. Owners may contact Altec customer service at 1-877-462-5832.
Altec Industries, Inc.Manufacturer number CSN-3271View on NHTSA.gov

STRUCTURE:FRAME AND MEMBERS

Aug 29, 2025
903 units potentially affected
The defect: Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle.
The risk: A cable step that fails during use increases the risk of injury.
The remedy: Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs will be performed free of charge. Owner notification letters were mailed October 24, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3246.
Altec Industries, Inc.Manufacturer number CSN-3246View on NHTSA.gov

ELECTRICAL SYSTEM:IGNITION

Sep 12, 2024
968 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2023-2024 Altec Aerial Device, Digger Derrick, and Pressure Digger vehicles. The chassis ignition circuit may be overloaded, which can result in a blown fuse and cause an engine shutdown.
The risk: An engine shutdown increases the risk of a crash.
The remedy: Altec will rewire the accessory circuit, free of charge. Owner notification letters were mailed November 8, 2024. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3185.
Altec Industries, Inc.Manufacturer number CSN-3185View on NHTSA.gov

EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:TURNTABLE

Oct 19, 2023
48 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2023 DC and DM Digger Derricks. The turntable rotation gearbox may fail at high loads due to a defect in the brake flange casing.
The risk: Gearbox failure may result in unexpected turntable rotation, increasing the risk of injury.
The remedy: Altec will work with the gearbox supplier to test and replace the gearbox, if necessary, free of charge. Owner notification letters were mailed November 21, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is MAB 3130.
Altec Industries, Inc.Manufacturer number MAB 3130View on NHTSA.gov

EQUIPMENT:MECHANICAL:WINCH

Sep 14, 2023
53 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2004-2023 DL42 and DL45 Digger Derricks. The incorrect hydraulic load holding valve may have been installed, which can cause the winch to lower uncontrollably and the load to fall.
The risk: An uncontrolled load falling increases the risk of injury to personnel or others nearby.
The remedy: Altec will replace the load holding valve, free of charge. Owner notification letters are expected to be mailed October 6, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is MAB 3113.
Altec Industries, Inc.Manufacturer number MAB 3113View on NHTSA.gov

ELECTRICAL SYSTEM

Jul 27, 2023
535 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2022-2023 Aerial Devices (AT, TA, L44, L45, LR8, AA, AM, AN) and D series Digger Derricks (DH, DL, DM, DT). The power inverter that converts electrical DC power to AC power may have been installed without a circuit breaker to protect the AC output circuit.
The risk: Without a circuit breaker, the AC circuit may overheat, increasing the risk of a fire.
The remedy: Altec will install a 20-amp circuit breaker in the AC circuit, free of charge. Owner notification letters were mailed December 21, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3103.
Altec Industries, Inc.Manufacturer number CSN 3103View on NHTSA.gov

EQUIPMENT:EMERGENCY:SIREN/LIGHTING/STROBES

May 18, 2023
5,431 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2021-2023 Aerial Devices, Digger Derricks, Service Bodies and Cranes. Water can leak into the strobe lights, which could cause an electrical short-circuit.
The risk: An electrical short-circuit can increase the risk of a fire.
The remedy: Altec will provide instructions to inspect the light assembly for moisture and install a new fuse. If moisture is found or the light is inoperative, a light replacement kit will be installed. Repairs will be performed free of charge. Owner notification letters are expected to be mailed July 14, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3079.
Altec Industries, Inc.Manufacturer number CSN 3079View on NHTSA.gov

EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER

May 11, 2023
44 units potentially affected
The defect: Altec Industries, Inc. (Altec) is recalling certain 2021-2023 DT85 Digger Derricks. The Boom pressure limiter may allow the boom to lift loads above the rated capacity and over the Hydraulic Overload Protection (HOP) setting.
The risk: Lifting loads above the boom capacity could overload the unit and cause instability, increasing the risk of injury.
The remedy: Altec will provide instructions to owners to test the boom lift pressure limiter setting and set it to the correct pressure, free of charge. Owner notification letters are expected to be mailed July 7, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3078.
Altec Industries, Inc.Manufacturer number CSN 3078View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources