RoadVitals

2020 Altec EC505

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest Aug 25, 2020
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2020 Altec EC505. 1 safety recall has been issued covering this model year; and 2 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
20V501000

EQUIPMENT

Aug 25, 2020
30 units potentially affected
The defect: Altec Industries Inc. (Altec) is recalling certain 2018-2020 EC505 6S+3S and EC655 6S+6S vehicles. The load holding grip of the grapple tines may loosen, resulting in a loss of load control.
The risk: Loss of load control may increase the risk of death or injury.
The remedy: Altec will notify owners, and dealers will install a counterbalance valve with a lower pressure ratio to increase the opening threshold, free of charge. The recall began October 20, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 773.
Altec Industries Inc.Manufacturer number CSN 773View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

SIL 801

EQUIPMENT; WHEELS

Altec has learned that the fender rubber on certain units built from July 2020 to October 2020 can become detached from the wheel well fender cutout of the utility body. Altec recommends that all fender rubber be inspected using the inspection procedure described in the SIL. If the installed fender rubber does not pass inspection, order and install the Fender Rubber Replacement Kit. If the fender rubber passes the inspection, complete the Inspection Sheet at the end of this document. No additional inspections are required.

SIL 780

STEERING

Altec has discovered that the EZ Trac hydraulic all-wheel drive (AWD) system may have been improperly installed on some units. Incorrect steering adjustments can cause the front wheels to oversteer. This can damage the steering stop bolts, causing the tires to rub on chassis components. Incorrect hydraulic hose routing can subject the hoses to damage. This can cause fluid leakage, resulting in the loss of AWD assistance. Altec requires the following actions to be performed on the affected units no later than 30 days after receiving the SIL. - Inspect the EZ Trac system using the Inspection Procedure provided in the notification. - Have Altec make any required repairs.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Altec EC505 by model year
YearComplaintsRecallsInvestigationsIssue Index
2020Viewing010—
2019010—
2018010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.