RoadVitals

2009 Altec WC126

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
2
Latest Oct 17, 2013
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2009 Altec WC126. 2 safety recalls have been issued covering this model year.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

2 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov

SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY

Oct 17, 2013
682 units potentially affected
The defect: Altec is recalling certain model year 2008-2010 WC126/166 and WC126A/166A Wood Chippers with various frame and axle combinations. In certain combinations, the bracket attaching the axle to the chipper may develop cracks and break.
The risk: If the bracket breaks, the axle may separate from the chipper, increasing the risk of a crash.
The remedy: Altec will notify owners and service personnel will check and replace any axles as necessary, free of charge. The recall began on November 15, 2013. Owner's may contact Altec at 1-877-462-5832. Altec's recall number is CSN 581.
Altec Industries Inc.Manufacturer number CSN 581View on NHTSA.gov

STRUCTURE:FRAME AND MEMBERS

Oct 5, 2010
686 units potentially affected
The defect: ALTEC IS RECALLING CERTAIN MODEL YEAR 2008-2009 WC126 AND WC166, MODEL YEAR 2009-2010 WC126A AND WC166A WOOD CHIPPER UTILITY VEHICLES BUILT FROM JANUARY 2008 THROUGH MAY 2010. IT WAS DISCOVERED CRACKS MAY DEVELOP IN THE FRAME RAILS OF WOOD CHIPPERS DUE TO CONCENTRATED LOADS ON THE FRAME RAIL FLANGE AT THE AXLE MOUNT.
The risk: WHILE LOADING THE FRAME COULD BRAKE INCREASING THE RISK OF PROPERTY DAMAGE AND PERSONAL INJURY.
The remedy: DEALERS WILL INSPECT AND REPAIR OR REPLACE AS NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 25, 2010. OWNERS MAY CONTACT ALTEC AT 1-877-462-5832.
ALTEC INDUSTRIES INC.Manufacturer number CSN 531View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Compare model years

Complaint and recall counts across every year of this model

Altec WC126 by model year
YearComplaintsRecallsInvestigationsIssue Index
2010010
2009Viewing020
2008020

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.