2005 BMW R 1200 Gs Problems

LEAKING FUEL FLANGED, THE MATERIAL IS MADE OF PLASTIC AND PRONE TO BREAKING THAT CAN CAUSE FUEL TO LEAK TO THE ENGINE THEN IGNITING THE FUEL THAT WILL START ENGINE FIRE.

TL* THE CONTACT OWNS A 2005 BMW R1200 GS. THE CONTACT STATED THAT WHILE DRIVING APPROXIMATELY 20 MPH, FUEL HAD LEAKED FROM THE FUEL PUMP FLANGE AND SPRAYED ONTO THE RIDERS LEG AND PARTS OF THE MOTORCYCLE. THE CAUSE OF THE FAILURE WAS NOT DIAGNOSED OR REPAIRED. THE MANUFACTURER AND AN UNKNOWN LOCAL DEALER WERE NOTIFIED OF THE FAILURE BUT NO ASSISTANCE WAS OFFERED. THE CONTACT WAS INFORMED THAT THE MOTORCYCLE WAS NOT INCLUDED IN THE NHTSA CAMPAIGN NUMBER: 13V617000 (FUEL SYSTEM) ALTHOUGH THE MOTORCYCLE HAD EXPERIENCED THE SAME FAILURE LISTED IN THE RECALL. THE FAILURE MILEAGE WAS 24,000.

UPON REPLACING REAR TIRE AT THE BMW DEALERSHIP, NOTICED A CRACKED REAR WHEEL FLANGE. THESE CRACKS APPEARED ON 4 OF 5 ATTACHMENT POINTS WHERE THE FLANGE BOLTS ONTO THE REAR DRIVE. THIS IS A PART THAT HOLDS THE WHEEL TO THE MOTORCYCLE. SPOKE TO BMW NA AND THEY DO RECOGNIZE THE PROBLEM AS INHERENT DEFECT, AND HAVE NOT RECALLED DESPITE HAVING REDESIGNED THE REPLACEMENT PART SEVERAL TIMES OVER THE LAST FEW YEARS (IMPLIED ADMISSION BY BMW OF THE INHERENT DEFECT DUE TO REDESIGN). THIS IS SAFETY ISSUE RELATED TO AN INHERENT DEFECT OF SAFETY CRITICAL PART - THE REAR WHEEL FLANGE. FAILURE OF THIS PART WHILE THE VEHICLE IS BEING OPERATED MAY CAUSE LOSS OF REAR BRAKE FUNCTION, LOSS OF STEERING ABILITY, SUDDEN SEIZURE OF REAR WHEEL, AND/OR POSSIBLE LOSS OF REAR WHEEL. THIS MAY LEAD TO SERIOUS INJURY AND EVEN DEATH. *TR

I WAS REPLACING MY REAR BRAKE ROTOR. THE ROTOR IS BOLTED TO A PIECE CALLED A FLANGE (PART NUMBER 33117722831) USING 5 BOLTS. I FOUND THAT EACH OF THE 5 BOLT HOLES IN THE FLANGE ARE CRACKED. IF THIS PART WERE TO COME APART WHILE RIDING I THINK IT WOULD CAUSE THE REAR WHEEL TO LOCK UP AND SKID OR POSSIBLY WORSE. THE FLANGE (PART NUMBER 33117722831) IS ALSO PART OF THE POWER TRAIN AND REAR WHEEL DRIVE SYSTEM (ALSO KNOWN AS THE FINAL DRIVE SYSTEM) FOR THE BMW R1200GS MOTORCYCLE. THE BMW MUST KNOW THAT THIS IS A DANGEROUS PROBLEM BECAUSE THEY HAVE REDESIGNED THE PART. SEARCHING THE INTERNET FOR "BMW R1200GS FLANGE CRACK" RETURNS MANY PAGES OF INFORMATION ON THIS PROBLEM. HERE IS A GOOD SUMMARY: HTTP://WWW.MTS1200.INFO/MOTORCYCLEINFO/INDEXE65D.HTML?FA=CONTENTGENERIC.NKYQIUKEVRYEUZUT&PAGEID=360814. *TR

ABS PUMP FAILURE.

I EXPERIENCED A 100% NO BRAKES SITUATION COMING INTO A SLOW SPEED 90 DEGREE TURN ON A BACK ROAD. LUCKILY I HADN'T BEEN GOING TO FAST AND WAS ABLE TO DOWN SHIFT AND SCRUB A LITTLE SPEED BUT FORCED WITH ONLY ENGINE BRAKING AND A VERY OLD ASPHALT ROAD COVERED IN GRAVEL I HAD TO LAY IT DOWN TO STOP FROM GOING INTO A 60FT+ RAVINE. I'VE PUT 250-300K OF STREET RIDING UNDER MY BUTT AND THIS IS THE FIRST TIME I'VE LAID A BIKE DOWN. I DID HURT MY LEFT LEG AND I HAVE A HUGE BRUISE THERE NOW AND MY CRASH BARS PREVENTED ANY MAJOR DAMAGE TO THE BIKE BUT IT DID STILL CAUSE ABOUT $500 IN DAMAGES. I'M WELL AWARE OF THE PROBLEMS THAT THE 05-06 SERVO BIKES HAVE HAD WITH BRAKE FAILURE BUT I'VE ALWAYS READ THAT THE RESIDUAL BRAKES ARE STILL THERE IF THE SERVOS FAIL. I CAN ATTEST I HAD ZERO BRAKES! LEVER WENT TO THE BARS AND REAR JUST FELL DOWN AND HAD NOTHING. I'VE ACTUALLY PRACTICE A COUPLE PANIC STOPS WITH THE IGNITION OFF TO EXPERIENCE WHAT JUST THE RESIDUAL BRAKE FEEL LIKE AND I WAS ABLE STOP FAIRLY NORMAL WITH JUST SOME INCREASE EFFORT. THIS WAS NOT THAT! AFTER THE CRASH I TURNED OFF THE BIKE AND ANOTHER RIDER HELPED ME PICK IT UP. UPON TURNING IT BACK ON I STILL HAD ZERO BRAKES THE LEVER JUST WENT TO THE BARS AND REAR HAD NOTHING. WHEN I TURNED THE BIKE BACK ON I HAD THE ABS AND BRAKE FAILURE LIGHTS FLASHING AND THE SERVO NEVER KICKED ON TO DO ITS BIT CYCLE. SO ME AND THE OTHER GUY SAT THERE TALKING ABOUT WHAT JUST HAPPENED AND ABOUT 2 MINUTES OR SO WENT BY AND ALL OF A SUDDEN THE SERVOS KICKED ON AND ALL THE WARNING LIGHTS WENT OFF AND MY BRAKES WHERE BACK TO NORMAL!!! I TURNED THE BIKE OFF AND NOW I HAD RESIDUAL BRAKES AGAIN! THIS FAILURE COULD HAVE VERY WELL KILLED ME IF IT HAPPENED IN MULTIPLE AREAS EARLIER IN THE RIDE. A QUICK GOOGLE SEARCH SHOWS THAT THIS HAS HAPPENED TO NUMEROUS PEOPLE. *TR

TL* THE CONTACT OWNS 2005 BMW R1200 GS. THE CONTACT STATED THAT WHILE INSPECTING THE MOTORCYCLE, THE CONTACT DISCOVERED THAT THERE WAS A CRACK ON THE REAR WHEEL FLANGE. THE MOTORCYCLE WAS TAKEN TO A DEALER WHERE IT WAS DIAGNOSED WITH A FRACTURED WHEEL FLANGE. THE MANUFACTURE WAS MADE AWARE OF THE FAILURE. THE FAILURE AND CURRENT MILEAGE WAS 47,000.

DISCOVERED 12/9/2012. EXTENT OF CRACKING INDICATES THAT THE ISSUE LIKELY BEGAN A NUMBER OF YEARS EARLIER. MY FUEL TANK HAS PLASTIC QUICK DISCONNECT FITTINGS ON LEFT AND RIGHT SIDE. NUMEROUS (8-12) SMALL RADIAL CRACKS HAVE APPEARED IN EACH OF THE QUICK DISCONNECT REINFORCEMENT FLANGES, EXTENDING IN SEVERAL CASES DOWN TO THE TOP OF THE TANK. CONTINUED GROWTH OF THE CRACKS INTO THE THREADED AREA HAVE RESULTED IN FUEL LEAKS ON OTHER BIKES WITH THIS SAME CONFIGURATION (BUT NOT YET ON MY BIKE). BELIEF IS THAT THE COMPOSITE QUICK DISCONNECT EXPANDS DURING PRESSURE CYCLING AND IMPARTS A RADIAL LOAD TO THE PUMP HOUSING QUICK DISCONNECT REINFORCEMENT FLANGE. OVER TIME, THIS PRESSURE CYCLING CAUSES CRACKS TO APPEAR IN THE REINFORCEMENT FLANGE WHICH EVENTUALLY RESULT IN FUEL LEAKS. SEE ODI 10428629 AND CASE [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR

UPON INSPECTION, I DISCOVERED 4 OF THE 5 WHEEL MOUNTING HOLES IN THE ALUMINUM REAR WHEEL FLANGE ARE CRACKED. I HAVE READ ABOUT MANY PEOPLE HAVING THIS ISSUE WITH THIS MODEL VEHICLE. I'VE STOPPED RIDING UNTIL IT IS FIXED BECAUSE IT COULD BREAK CAUSING AN ACCIDENT WHICH COULD LEAD TO INJURY OR DEATH. *TR

AFTER NOTICING A SMALL AMOUNT OF EXCESSIVE MOVEMENT IN THE REAR WHEEL WHEN RIDING THROUGH TURNS, I GOT HOME AND INSPECTED THE AREA AND FOUND CRACKS IN THE ALUMINUM REAR WHEEL FLANGE AT THE WHEEL MOUNTING HOLES. AFTER RESEARCHING THE ISSUE, I DISCOVERED THIS IS A RECALLED PART UNDER RECALL CAMPAIGN 15V-141. THE RECALL INSTRUCTS REPLACING THE ALUMINUM FLANGE WITH A NEW STEEL FLANGE. FURTHERMORE, ASSOCIATED SERVICE BULLETINS 3300115(007) AND 3300115(007)R3 DISPLAY IMAGES OF THE RECALLED ALUMINUM FLANGE FOR EASY IDENTIFICATION AND INSTRUCTS DEALERSHIPS TO REPLACE THE ALUMINUM FLANGE WITH A NEW STEEL ONE, EVEN IF NO CRACKS ARE PRESENT. MY FLANGE DOES MATCH THE IMAGES IDENTIFYING IT AS THE ALUMINUM FLANGE IN QUESTION. ALSO, TO BE THOROUGH, I PLACED A MAGNET ON THE FLANGE, AND IT DID NOT STICK. IT WOULD HAVE STUCK TO A STEEL FLANGE. ACCORDING TO THE DETAILS OF THE RECALL ON THE NHTSA SITE, THE RECALL DOES COVER THE YEAR AND MODEL OF MY VEHICLE, BUT, WHEN I RESEARCH MY VIN, THE RECALL DOES NOT SHOW UP.

THE TURN SIGNALS BEGAN WITH INTERMITTENT MALFUNCTION AND HAVE NOW FAILED COMPLETELY. AFTER INVESTIGATING I FOUND THAT THIS IS A TYPICAL FAILURE ON BMW MOTORCYCLES AND HAS BEEN TRACED TO NON-FUNCTIONAL MICRO SWITCHES IN THE HANDLE BAR CONTROL ASSEMBLIES, BOTH LEFT AND RIGHT. *TR

TL*THE CONTACT OWNS A 2005 BMW R1200 GS. THE CONTACT STATED THAT THE VEHICLE WAS EXPERIENCING FINAL DRIVE BEARING FAILURE. HE STATED THAT THE REAR WHEEL BECAME FLAT. WHEN HE REMOVED THE WHEEL, IT WAS DISCOVERED THAT A LOOSE BEARING CAUSED THE FAILURE. HE STATED THAT BMW DOES NOT CONSIDER THIS TO BE A SAFETY ISSUE. THE CONTACT IS HAVING THE VEHICLE REPAIRED WITH NEW BEARINGS. THE POWERTRAIN WAS UNKNOWN. THE CURRENT AND FAILURE MILEAGES WERE 17,500. THE CONSUMER STATED DEALER REPLACED BEARINGS AND SEALS @ 17,670 AND THE SECOND DEALER REPLACED COMPLETE FINAL DRIVE AND COVER @ 18,699. THE DEALER STATED REAR DIFFERENTIAL FAILURE AND REMOVE TAIL LIGHT. UPDATED 11/21/07 *TR

AFTER FILLING UP ON FUEL AND DRIVING HOME (LESS THAN FIVE MILES), I PARKED THE MOTORCYCLE. LATER IN THE DAY, I NOTICED FUEL ON THE ASPHALT BENEATH THE BIKE AND LEAKING FROM THE FUEL PUMP, DOWN ONTO THE ENGINE, LEFT EXHAUST PIPE AND OTHER PARTS OF THE FRAME. FURTHER INSPECTING, I FOUND FUEL POOLED ATOP THE FUEL PUMP HOUSING. MOPPING UP THE FUEL, I IDENTIFIED A HAIRLINE CRACK IN THE UPPER PLASTIC HOUSING THAT HOLDS THE FUEL PUMP, FUEL PUMP ELECTRONICS AND FUEL LINE CONNECTION. THE FUEL PUMP ELECTRONICS UNIT WAS DAMAGED BY EXPOSURE TO THE FUEL, CAUSING SILICON INSULATION TO CRUMBLE AND FALL AWAY. (EVIDENCE THAT THE LEAK HAD EXISTED FOR SOME TIME, BUT ONLY CAME TO MY ATTENTION AFTER THIS PARTICULAR FILL-UP.) REPLACEMENT PARTS ESTIMATE FROM BMW: $680.34 (INCLUDING TAX, BUT EXCLUDING INSTALLATION.) *TR

IN THE LAST SEVEN YEARS, I HAVE RIDDEN OVER 100,000 MILES ON SIX DIFFERENT BMW MOTORCYCLES, ALL PURCHASED NEW. I RIDE YEAR-ROUND AND HAVE ALWAYS USED AN ELECTRIC VEST TO AVOID HYPOTHERMIA. IN SEPTEMBER, 2005 I PURCHASED A NEW 2005 BMW R1200RT MOTORCYCLE. DURING A CROSS-COUNTRY RIDE IN MAY, 2006, MY NON-BMW BRAND ELECTRIC VEST FAILED TO FUNCTION DURING RAIN AND COLD TEMPERATURES ENCOUNTERED IN SOUTH DAKOTA. THE NEXT DAY, I EXPERIENCED UNUSUAL FATIGUE, WENT OFF THE ROAD IN KANSAS, TOTALED THE BIKE AND BROKE MY LEG. I SUBSEQUENTLY FOUND OUT BY READING A MOTORCYCLE PUBLICATION THAT BMW DELIBERATELY ENGINEERED THE STANDARD 12 VOLT OUTLET ON THE FAIRING TO SHUT DOWN WHEN USING A NON-BMW ELECTRIC VEST. I BELIEVE BMW HAS AN OBLIGATION TO WARN OWNERS ABOUT THIS UNEXPECTED LACK OF PERFORMANCE WHICH IN MY MIND WAS A SIGNIFICANT CONTRIBUTOR TO MY PROPERTY LOSS AND PERSONAL INJURY. ON MY REPLACEMENT BIKE, I WILL GO TO THE EXPENSE OF INSTALLING A 12 VOLT FAIRING OUTLET DIRECTLY CONNECTED TO THE BATTERY. *JB

LEAKING FUEL FLANGED, THE MATERIAL IS MADE OF PLASTIC AND PRONE TO BREAKING THAT CAN CAUSE FUEL TO LEAK TO THE ENGINE THEN IGNITING THE FUEL THAT WILL START ENGINE FIRE.

ENGINE REAR MAIN SEAL BEGAN LEAKING RIGHT AFTER WARRANTY PERIOD EXPIRED. THIS WAS SECOND MAJOR SEAL FAILURE, THE FIRST BEING TRANSMISSION OUTPUT SEAL. THE SEAL WAS REPLACED WITHIN A WEEK, BUT BEGAN LEAKING AGAIN ON THE TRIP BACK FROM THE REPAIR SHOP. THIS IS A VERY COMMON PROBLEM WITH THIS MOTORCYCLE AND USUALLY LEADS TO OIL CONTAMINATION ON THE CLUTCH, LEADING TO CLUTCH FAILURE. BMW REFUSES TO RECOGNIZE THIS DEBILITATING PROBLEM AND OFFERS NO AFTER-WARRANTY SUPPORT. *TR

UPON REPLACING REAR TIRE AT THE BMW DEALERSHIP, NOTICED A CRACKED REAR WHEEL FLANGE. THESE CRACKS APPEARED ON 4 OF 5 ATTACHMENT POINTS WHERE THE FLANGE BOLTS ONTO THE REAR DRIVE. THIS IS A PART THAT HOLDS THE WHEEL TO THE MOTORCYCLE. SPOKE TO BMW NA AND THEY DO RECOGNIZE THE PROBLEM AS INHERENT DEFECT, AND HAVE NOT RECALLED DESPITE HAVING REDESIGNED THE REPLACEMENT PART SEVERAL TIMES OVER THE LAST FEW YEARS (IMPLIED ADMISSION BY BMW OF THE INHERENT DEFECT DUE TO REDESIGN). THIS IS SAFETY ISSUE RELATED TO AN INHERENT DEFECT OF SAFETY CRITICAL PART - THE REAR WHEEL FLANGE. FAILURE OF THIS PART WHILE THE VEHICLE IS BEING OPERATED MAY CAUSE LOSS OF REAR BRAKE FUNCTION, LOSS OF STEERING ABILITY, SUDDEN SEIZURE OF REAR WHEEL, AND/OR POSSIBLE LOSS OF REAR WHEEL. THIS MAY LEAD TO SERIOUS INJURY AND EVEN DEATH. *TR

TL*THE CONTACT OWNS A 2005 BMW R1200 GS. THE CONTACT STATED THAT THE VEHICLE WAS EXPERIENCING FINAL DRIVE BEARING FAILURE. HE STATED THAT THE REAR WHEEL BECAME FLAT. WHEN HE REMOVED THE WHEEL, IT WAS DISCOVERED THAT A LOOSE BEARING CAUSED THE FAILURE. HE STATED THAT BMW DOES NOT CONSIDER THIS TO BE A SAFETY ISSUE. THE CONTACT IS HAVING THE VEHICLE REPAIRED WITH NEW BEARINGS. THE POWERTRAIN WAS UNKNOWN. THE CURRENT AND FAILURE MILEAGES WERE 17,500. THE CONSUMER STATED DEALER REPLACED BEARINGS AND SEALS @ 17,670 AND THE SECOND DEALER REPLACED COMPLETE FINAL DRIVE AND COVER @ 18,699. THE DEALER STATED REAR DIFFERENTIAL FAILURE AND REMOVE TAIL LIGHT. UPDATED 11/21/07 *TR

REPLACED REAR TIRE AND NOTICED CRACKS ON HUB FLANGE. WENT ONLINE TO SEE IF ANY BODY ELSE HAD SAME PROBLEM . FOUND MANY OTHER COMPLAINTS. YEARS 2004-2007. PART WAS REDESIGNED AND REPLACED FROM 2008 THRU PRESENT. WANT TO REPORT BEFORE SOMEBODY DIES OR IS SERIOUSLY INJURED. NEEDS TO BE RECALLED BY BMW. *TR