2009 BMW R 1200 RT Problems

The OEM plastic 90° quick discount fitting on top of the fuel pump started spraying fuel. I started smelling fuel on the interstate highway 10 and by the time I could pull over safely off the interstate I was covered with fuel. The fuel was running down on the hot exhaust pipe’s on the front left side of the motorcycle and spraying all over my face and legs. I could have been set on fire and burnt to death because of where the fuel was spraying from. This also could have cost the lives of the people on the interstate had i burst into flames and lost control of the motorcycle. When I called the BMW dealership in Tucson AZ the service tech told me that they had a medal aftermarket 90° fitting that would fix my problem. I replaced the fitting and the fuel leak was fixed. This motorcycle fuel pump was replaced 07/01/2014 at mileage 12,482 because of a fuel leak recall. I’m filling this report because this fitting fail happened without warning 15,700 miles after the fuel flange recall. This must be a common problem for the service tech to know over the phone the fox and have a aftermarket medal part that fixed the fuel leak. The location of this potential leak makes it extremely dangerous hazard.

Throttle body cams broken, no symtoms, could have caused crash from complete power loss to the engine, could have crashed or been hit. Dealer replaced.

2009 BMW R1200RT MOTORCYCLE REAR BEARING FAILURE THAT LED TO A FINAL DRIVE FAILURE. At highway speed, heard clicking noise from rear of bike. While parked on center stand and spinning rear wheel, heard a terrible grinding sound. Who knows what would have happened had I not exited when I did. This left me stranded, requiring a tow; repair took two days and was over $3,000.

CATASTROPHIC FAILURE OF THE REAR DIFFERENTIAL (FINAL DRIVE). THE DRIVE BEGAN MAKING GRINDING AND SQUEALING NOISES. I THEN FELT THE REAR WHEEL LOOSING TRACTION. I PULLED TO THE SHOULDER IMMEDIATELY. I NOTICED AT THAT TIME A BRAKE FAILURE WARNING LIGHT ILLUMINATED ON THE INSTRUMENT PANEL. MY REAR BRAKE WAS INEFFECTIVE. UPON EXAMINING THE DRIVE AREA THERE WAS GEAR OIL ALL OVER THE REAR BRAKE CALIPER, DISC AND REAR WHEEL, INCLUDING THE TIRE. THE FINAL DRIVE WAS SERVICED APPROXIMATELY 1200 MILES PRIOR TO THIS FAILURE, IT HAD BEEN FILLED WITH THE CORRECT VISCOSITY OIL AT THE RECOMMENDED LEVEL OF 180CC. AT THAT TIME THERE WERE NO METALLIC SHAVING OF ANY KIND VISIBLE IN THE OIL THAT WAS DRAINED FROM THE DRIVE. THE FAILURE OCCURRED ON TEXAS STATE HIGHWAY 6 IN A RURAL AREA.

THE DIGITAL STRIP FUEL GAUGE SIMPLY FROZE IN THE FULL POSITION, IT NO LONGER REGISTERS NOR DOES THE MILES REMAINING DIGITAL READOUT. *TR

THE GAS GAUGE SENSOR STRIP STOPS WORKING AND WILL READ THAT YOU HAVE MORE GAS THAN YOU ACTUALLY DO. THIS IS EXTREMELY DANGEROUS AND CAN CAUSE THE RIDER TO RUN OUT OF GAS AND BE STRANDED IN MOVING TRAFFIC. THERE ARE TOO MANY COMPLAINTS FROM BMW MOTORCYCLE OWNERS TO IGNORE THIS PROBLEM ANY LONGER! PLEASE MAKE THE MANUFACTURER ADDRESS THIS PROBLEM INSTEAD OF CONTINUING TO PROFIT OFF OF A SAFETY ISSUE. A GOOGLE SEARCH ON "BMW MOTORCYCLE FUEL STRIP" WILL GIVE YOU ALL THE LEVERAGE YOU NEED. *TR

On 06-19-2023 i was North bound I275 north of 8 mile about 715pm. I was in the left lane going about 68 mph. All of a sudden my It felt like my throttle cable broke, when I twisted it there was no motor response forward and backward, but my motor was red lining against the Rev limiter, so I pulled in the clutch and it did not slow down at all. Actually I sped up to over 100 mph, thankfully there was noone in front of me, I steadily pulled on the front brake and stepped on the back brake until I came to a stop. The length I went was at least 1 1/2- 2 miles from when I thought the cable broke till I got it stopped. I had it towed to southeast bmw in Plymouth, MI. It's still in the shop as of July 31,2023. So I don't know what exactly went wrong yet. They are waiting on a part and said the throttle cable didn't break. My question is why did I continue to go faster while the clutch was in. Besides what ever went wrong on the bike and heavier pants, myself and the bike were not harmed.

TL* THE CONTACT OWNS A 2009 BMW R 1200 RT. THE CONTACT STATED UPON MERGING INTO TRAFFIC, THE MOTORCYCLE LOSS MOTIVE POWER WITHOUT WARNING. THE CONTACT PULLED OVER IN A PARKING LOT AND ATTEMPTED TO REPAIR THE MOTORCYCLE HIMSELF. THE MOTORCYCLE WAS THEN RIDDEN TO HIS RESIDENCE. THE MOTORCYCLE WAS NOT TAKEN TO A DEALER NOR INDEPENDENT MECHANIC TO BE DIAGNOSED OR REPAIRED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS 35,000.

TECHNICIAN FOUND THAT THE ENGINE DOES NOT RESPOND TO THROTTLE INPUTS. DISCOVERED LEFT AND RIGHT THROTTLE BODY REQUIRE REPLACEMENT DUE TO CABLE CAMS ARE BROKEN. BOUGHT THIS BIKE FOR PARTS. CHOSE TO FIX IT UP GIVEN LOW MILEAGE. LOOKS LIKE PLASTIC CAM FRACTURES FREQUENTLY. LUCKY I FOUND OUT BEFORE I TRIED RIDING IT. NEWER MODELS BY MANUFACTURER AND AFTERMARKET PARTS OFFER METAL CAM. EVEN MY KIDS CAR SEATS NEED TO BE REPLACED AFTER 10 YEARS BECAUSE OF “PLASTICS FATIGUE/FAILURE”.

THE THROTTLE BODIES ON THIS MOTORCYCLE ARE CABLE-ACTUATED, WITH PLASTIC PULLEYS MOLDED ONTO THE THROTTLE SPINDLES. THESE PLASTIC PULLEYS WERE SEVERELY CRACKED AND I HAVE REPLACED THEM (I STILL HAVE THE OLD PARTS). I'M AWARE OF NUMEROUS BMW MOTORCYCLES OF THIS VINTAGE THAT HAVE DEVELOPED CRACKS IN THE THROTTLE PULLEYS. I DISCOVERED MY PROBLEM VIA INSPECTION IN MY GARAGE, BUT I'M CURRENTLY AWARE OF TWO OTHER OWNERS FOR WHOM THE PULLEYS DETACHED FROM THE SPINDLES WHILE RIDING, CAUSING A SUDDEN LOSS OF ENGINE POWER. THIS PROBLEM HAS ALSO MANIFESTED ON OTHER BMW MOTORCYCLES THAT USE THE SAME ENGINE (E.G. THE R1200GS).

ABS SERVO FAILED. COMPLETE LOSS OF THE ANTI-LOCK BRAKE FEATURE ON MOTORCYCLE. I AM REPORTING THIS BECAUSE I FEEL THIS IS AN IMPORTANT SAFETY FEATURE FAILURE THAT OCCURRED WITH VERY FEW MILES ON THE MACHINE. I HAVE ALREADY REPLACED THE ENTIRE ELECTRIC FUEL PUMP (RECALLED) AND REAR WHEEL HUB (RECALLED). I AM AFRAID OF THE SAFETY OF THIS VEHICLE AND DOUBT THE ADVERTISED "RELIABILITY" TOUTED BY THE MANUFACTURER, BMW MOTRORAD.

ABS FAILURE. KNOWN ISSUE IN THE BMW COMMUNITY, GOT THE STEADY BURN "BRAKE FAILURE" LIGHT ON THE DASHBOARD, AND NO MATTER WHAT I DO CAN'T CLEAR. VERIFIED THAT I'VE LOST ALL ABS FRONT AND BACK. ABS MODULATOR FAILURE. *TR

TL* THE CONTACT OWNS A 2009 BMW R 1200 RT. WHILE DRIVING AT 55 MPH, THE REAR OF THE MOTORCYCLE STARTED TO WOBBLE. THE VEHICLE WAS TAKEN TO A DEALER WHERE IT WAS DIAGNOSED THAT THE CROWN BEARING NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE WAS APPROXIMATELY 29,000. THE VIN WAS NOT AVAILABLE.

THE BMW MOTORCYCLE WAS BEING RIDDEN AT INTERSTATE SPEEDS WHEN IT BEGAN TO DEVELOP A VIBRATION. THE VEHICLE WAS SLOWED AND THE FIRST AVAILABLE EXIT WAS TAKEN. BY THIS TIME THE REAR WHEEL FELT LIKE IT WAS GOING TO LOCK UP. THE MOTORCYCLE WAS STOPPED AT THE FIRST SAFE PARKING AND A WRECKER WAS DISPATCHED. THE REPAIR FACILITY INFORMED ME THAT THE DRIVESHAFT UNIVERSAL JOINT HAD FAILED AND WAS BEATING AGAINST THE SWING ARM WHICH COULD HAVE BEEN A TOTAL FAILURE. THE DRIVESHAFT IS NOT A TEARDOWN AND INSPECT ITEM AND THEREFORE LEAVES THE RIDER WITH NO WARNING OF IMPENDING FAILURE. THIS IS VERY DANGEROUS. *TR

TL* THE CONTACT OWNS A 2009 BMW R 1200 RT. WHILE DRIVING AT 55 MPH, THE REAR OF THE MOTORCYCLE STARTED TO WOBBLE. THE VEHICLE WAS TAKEN TO A DEALER WHERE IT WAS DIAGNOSED THAT THE CROWN BEARING NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE WAS APPROXIMATELY 29,000. THE VIN WAS NOT AVAILABLE.

SIDE STAND INTERLOCK SWITCH FAILURE ON A 2009 BMW R1200RT MOTORCYCLE. THE SWITCH IS DESIGNED TO PREVENT THE MOTORCYCLE FROM BEING DRIVEN WITH THE SIDE STAND IN THE DOWN POSITION. THE SWITCH ON MY MACHINE FAILED WITH THE SIDE STAND IN THE UP POSITION AND THE MOTORCYCLE BEING DRIVEN DOWN THE ROAD AT APPROXIMATELY 40 MPH. WHEN THE SWITCH FAILED THE MOTOR STOPPED RUNNING, WHICH CAUSED THE REAR WHEEL TO SKID. I WAS ABLE TO PULL IN THE CLUTCH TO GET OUT OF THE REAR WHEEL SKID AND STEER THE MACHINE OFF THE ROAD. I WAS ABLE TO BY-PASS THE INTERLOCK SWITCH IN ORDER TO START THE MACHINE AND RIDE IT HOME. THE ONLY REPAIR WOULD BE THE REPLACEMENT OF THE SWITCH. THE PROBLEM I HAVE IS THAT ONCE THE MACHINE IS IN GEAR AND MOVING DOWN THE ROAD THE FAILURE OF THIS SWITCH SHOULD NOT CAUSE THE MOTOR OF THE MOTORCYCLE TO STOP UNEXPECTEDLY. THE LOSS OF ENGINE POWER COULD LEAD TO INJURY OR DEATH. IF THE SWITCH FAILS WHILE THE MACHINE IS BEING DRIVEN DOWN THE ROAD IT NEEDS TO ALERT THE RIDER OF A FAULT BUT NOT STOP THE MOTOR. IF THIS HAD HAPPENED TO ME AT 60 MPH I MIGHT NOT HAVE BEEN ABLE TO FILE THIS REPORT. *TR