RoadVitals

1995 BMW R1100

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
2
Latest Sep 5, 2000
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest Dec 31, 1997
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
1
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 2 NHTSA owner-reported complaints for the 1995 BMW R1100, most frequently naming the other / unspecified and suspension categories. 1 safety recall has been issued covering this model year; 1 NHTSA investigation names it; and 1 manufacturer communication is on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Other / unspecified266.7%
  • Suspension133.3%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
97V237000

ELECTRICAL SYSTEM:WIRING

Dec 31, 1997
2,000 units potentially affected
The defect: VEHICLE DESCRIPTION: MOTORCYCLES. A SHEET METAL PLATE MOUNTED TO THE FRONT OF THE FRAME BELOW THE INSTRUMENT CLUSTER CAN CAUSE THE WIRING HARNESS TO BE STRETCHED TOO TIGHT AS THE HANDLEBARS ARE TURNED FULLY TO ONE SIDE. IN ADDITION, THE WIRING HARNESS IS ATTACHED TO ANOTHER HARNESS WITH A CABLE TIE THAT IS PLACED TOO FAR FORWARD LIMITING THE HANDLEBAR MOVEMENT.
The risk: THE HARNESS WIRES CAN BE DAMAGED OR COULD BREAK OR PULL OUT OF THE IGNITION SWITCH. IF THE HARNESS WIRES WERE DAMAGED BUT NOT BROKEN OR DISCONNECTED, THE ELECTRICAL SYSTEM COULD BE AFFECTED WHILE THE MOTORCYCLE IS BEING DRIVEN. HESITATION, MISFIRING, OR "CUTTING OUT" COULD OCCUR INCREASING THE RISK OF A VEHICLE CRASH.
The remedy: DEALERS WILL RELOCATE THE WIRE TIE CONNECTING THE TWO WIRING HARNESSES TO A POINT FURTHER BACK FROM THE ORIGINAL LOCATION SO THAT THE IGNITION SWITCH WIRING HARNESS HAS SUFFICIENT FREEDOM OF MOVEMENT. ALSO IF THE WIRING HARNESS IS FOUND TO BE DAMAGED, THE IGNITION SWITCH (WITH HARNESS) WILL BE REPLACED.
BAYERISCHE MOTOREN WERKEView on NHTSA.gov

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.

SQ97022ClosedInvestigation

STEERING LOCK/IGNITION SWITCH WIRING

Opened Nov 14, 1997
Closed Dec 31, 1997

BMW WILL CONDUCT A SAFETY RECALL TO REMOVE THE SHEET METAL PLATE AND RELOCATE TWO WIRING HARNESSES SO THAT THE IGNITION WIRING HARNESS HAS SUFFICIENT FREEDOM OF MOVEMENT THROUGHOUT THE RANGE OF MOTION OF THE HANDLEBARS.WIRING HARNESSES FOUND DAMAGED, WILL BE REPLACED.NO FURTHER ACTION IS NECESSARY.THIS INVESTIGATION IS CLOSED.

STEERING

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

Other / unspecified
Filed Sep 5, 2000

THE RIMS ON THESE WHEELS ARE VERY SOFT. THE CALIFORNIA HIGHWAY PATROL NOW SPECIFIES A 'HARDENED' RIM ON THESE WHEELS FOR THEIR MOTORCYCLES. A KNOWN ISSUE.

NHTSA ID
730314
Incident
Apr 1, 2000
Other / unspecifiedSuspension
Filed Jun 17, 1997

THE SPOKE RIMS ARE TOO SOFT, CAUSING TIRES TO LOSE AIR.

NHTSA ID
518602
Incident
Apr 30, 1997

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

SB-00-021-07

FUEL SYSTEM, OTHER

BMW MOTORCYCLE: ENGINE FUELS CONTAINING ETHANOL. BMW MOTORRAD HAS NO OBJECTION TO THE USE OF SI ENGINE FUELS CONTAINING UP TO A MAXIMUM OF 10% ETHANOL AND IMPOSES NO WARRANTY RESTRICTIONS. ETHANOL MIXTURES IN PROPORTIONS HIGHER THAN 10% CAN HAVE AN ADVERSE EFFECT ON PERFORMANCE AND CAN RESULT IN DAMAGE TO COMPONENTS THAT COME INTO CONTRACT WITH FUEL. NO WARRANTY CLAIMS WHATSOEVER FOR DAMAGE CAUSED IN THIS WAY WILL BE ACCEPTED. NO MODEL YEARS LISTED. *PE

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

BMW R1100 by model year
YearComplaintsRecallsInvestigationsIssue Index
2000301—
1999100—
1998301—
1997011—
1996211—
1995Viewing211—
1994120—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.