ELECTRICAL SYSTEM:SOFTWARE
2020 BMW S1000 Xr
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Overview
Our database contains 2 NHTSA owner-reported complaints for the 2020 BMW S1000 Xr, most frequently naming the brakes category. 2 safety recalls have been issued covering this model year; and 24 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
Not enough dated records to plot a meaningful trend — 2 months of data.
What owners report
Complaints grouped by the component NHTSA recorded
- Brakes1100.0%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
2 campaigns cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govSERVICE BRAKES; SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER
Recent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
On multiple occasions the motorcycle engine has stopped/stalled as I approached a stop sign or traffic light and pulled in the clutch. In the most recent incident I was exiting a highway after several hours of riding, including multiple stops and starts and a range of speeds and weather conditions. I decelerated using engine braking from 6th to 1st gear, and then pulled in the clutch, whereupon the engine immediately stopped/stalled. I tried to restart it while still moving using the electric starter without success. I tried again after pulling to the side of the road, again without success. I moved the transmission to neutral, and still couldn't restart. Then I pulled in the clutch again, and the motorcycle began running. No other incident occurred during this day. No warnings or indicators were displayed on the dash. A few months ago, I had a similar situation. As I approached a "Y" in the road, decelerating using engine braking and downshifts, when I pulled in the clutch approaching the stop, the engine stalled/stopped. This time the adjoining road was pointed downhill, and I continued moving after making the right turn. Again, using the electric starter didn't work, but I was able to bump start the engine by releasing the clutch while in gear. I am concerned as this random loss of power doesn't appear to be covered by any recalls, can be found as an issue with other riders by Googling/Searching "2020 S1000XR Stall", and because the loss of power potentially places the rider in a dangerous situation in the road without the ability to move while traffic approaches from behind.
- NHTSA ID
- 11528455
- Incident
- Jun 21, 2023
BMW ISSUED A STOP SALE RECALL FOR MY S1000XR AS WELL AS THE S1000RR SO THEY COULD REPLACE THE BRAKE CALIPERS. WHEN NEW, BOTH OF THESE BIKES CAME WITH THE SAME BRAKE CALIPERS. BMW IS REPLACING THE S1000XR BRAKES WITH A MUCH LOWER QUALITY BRAKE THAN THEY ARE REPLACING ON THE S10000RR. AS THEY BOTH CAME WITH THE SAME HIGH QUALITY BRAKES WHEN SOLD NEW, THEY SHOULD BOTH GET EQUAL BRAKES AS REPLACEMENTS. BOTH OF THESE MOTORCYCLES ARE SOLD AS BEING READY TO USE ON RACE TRACKS, BUT THE REPLACEMENT BRAKES FOR THE S1000XR ARE NOT SUITABLE FOR THAT USE.
- NHTSA ID
- 11397097
- Incident
- Feb 8, 2021
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
ELECTRICAL SYSTEM
The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle âÂÂdischarged batteryâ complaints.
POWER TRAIN
After close inspection it has been found that DYNAMIC PRO riding mode cannot be selected with the MODE button, even though it was enabled in the main menu. It is also not possible to configure the DYNAMIC Pro riding mode.
WHEELS
Front and rear wheel speed sensor faults (0x3A1800 and 0x3A1801) appear after the bike is being revvedover 5000 RPM while still on the side stand, sometimes in conjunction with the side stand fault 0X3A1331. When the engine is revved up while on the side stand, vibrations are sent through the entire motorcycle.This vibration intensity varies from bike to bike. This vibration can cause particular movement between the wheel speed sensor and the sensor ringsdepending on the position of the sensor to the ring. The movement is picked up as rotation speed and iscalled ÃÂÃÂÃÂâÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂghost speedÃÂÃÂÃÂâÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂ. This ÃÂÃÂÃÂâÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂghost speedÃÂÃÂÃÂâÃÂÃÂÃÂÃÂÃÂÃÂÃÂàfollows the increase in RPMÃÂÃÂÃÂâÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂs. 5000 RPM = approx. 12 MPH 10000 RPM = approx. 31 MPH
SUSPENSION
CHECK ROCKER ARMS AND REPLACE WHERE NEEDED.
ELECTRICAL SYSTEM:12V/24V/48V BATTERY
BATTERY EMPTY DESPITE CHARGER.
EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY
Due to a process deviation during production, the surface coating of the rocker arms may wear prematurely.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.