2025 BMW X7 Driver assistance Problems

While driving under normal conditions, the Lane Keep Assist system on my 2025 BMW Alpina XB7 unexpectedly and violently jerked the steering wheel without driver input. The sudden steering intervention caused the vehicle to abruptly change direction and strike a curb, resulting in a loss-of-control event. This occurred without warning and could have resulted in a serious crash involving other vehicles, pedestrians, or roadside obstacles. Additionally, the adaptive cruise control system has repeatedly applied sudden and aggressive braking without an apparent reason or obstacle present. These abrupt braking events create a significant risk of a rear-end collision, as following vehicles are not anticipating such sudden deceleration. These issues involve advanced driver-assistance safety systems that are intended to enhance control and safety. Instead, they are operating in a manner that overrides driver input and introduces unsafe driving conditions. The servicing dealership acknowledged the issues and advised me not to use the Lane Keep Assist and cruise control features. Being instructed to disable safety systems due to unsafe behavior is unacceptable and does not resolve the underlying defect. Given the loss-of-control incident and the ongoing unpredictable braking behavior, I believe these defects present a serious safety risk to vehicle occupants and the public.

NHTSA ID

11714291

Incident

Dec 15, 2025

The contact's wife owns a 2025 BMW X7. The owner received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic). The contact had called several dealers to check for parts availability and was informed that parts were not yet available and that the manufacturer would mail another letter when parts became available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The owner had not experienced a failure.

NHTSA ID

11685355

Incident

Feb 12, 2024

The contact owns a 2025 BMW X7. The contact received notification of NHTSA Campaign Number: 24V104000 ( ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The contact stated that several dealers were contacted and informed the contact that parts were no longer available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.

NHTSA ID

11683703

Incident

Mar 15, 2024

The contact owns a 2025 BMX X7. The contact received notification of NHTSA Campaign Number: 24V104000 ( ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

NHTSA ID

11681597

Incident

Nov 15, 2024

I am leasing a 2025 BMW X7 vin number ([XXX]) through BMW Financial Services. The vehicle has had an active federal safety recall since approximately February 2024, and as of today, the manufacturer has not provided a remedy to address the issue. The recall is listed on the NHTSA website but remains unresolved for over 17 months, despite my attempts to obtain information and updates from both the dealership and BMW directly. I believe this is a violation of my consumer rights under the New Jersey Consumer Fraud Act and breach of warranty, as the vehicle has a known safety defect that the manufacturer has failed to repair within a reasonable time. I am requesting assistance in: 1.Reaching a resolution with BMW to either terminate the lease without penalty, or 2.Compelling the manufacturer to provide an immediate remedy. This recall impacts the safety and use of the vehicle, and I am concerned for both my safety and the financial obligations tied to a defective product. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID

11677700

Incident

Feb 7, 2024

The contact owns a 2025 BMW X7. The contact received notification of NHTSA Campaign Number: 24V104000 (ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

NHTSA ID

11675908

Incident

Oct 7, 2024

Vehicle Information: Make: BMW Model: X7 Year: [2025] VIN: [XXX] Component/System Involved: Parking Assistance / Automatic Parking System / Sensors Summary of the Issue (Complaint): On [XXX], while using the Parking Assistance feature on my father's BMW X7 (VIN: [XXX]), the vehicle malfunctioned and caused an accident inside our home driveway. While the system was guiding the vehicle into the garage—as it has successfully done many times before—it suddenly and erratically turned the steering wheel to the right, failed to stop, and struck another parked vehicle. There were no sensor warnings, no audible beeps, and the system did not engage the brakes to avoid the collision. My father was attentive and had to manually slam on the brakes, but the impact had already occurred. We reported the incident to our local BMW dealership and BMW North America. However, the response has been extremely unsatisfactory. A BMW engineer claimed the system was “working as intended,” even though the erratic behavior and failure to stop contradict that claim. Representatives implied the system requires full attentiveness, but my father was alert and monitoring the process. No one from BMW has taken responsibility, and they have refused to assist in repairing the vehicle damage caused by their system’s failure. This incident highlights a serious safety issue with BMW’s Parking Assistance system, which can misbehave even when used correctly and attentively. It poses a danger not just to property but potentially to people. I am filing this complaint in hopes that NHTSA investigates this matter further. Incident Type: Property Damage (No injuries) Location: Private residential garage Desired Action: Investigation into BMW’s Parking Assistance system functionality and accountability from the manufacturer for the damage caused by this failure. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID

11672210

Incident

Jun 20, 2025

We have contacted the BMW Dealership several times with no response on the recall. The BMWX7 was purchased on 5/25/24 and due to the recall is unsafe to drive. We are frustrated with BMW and lack of response and fix for the problem as of 1/28/25. At present we have a very nice new car that is garaged and are unable to drive due to the liability of potential braking or lack of braking that could cause an accident and bodily harm. What recourse can you offer to encourage BMW to get the problem corrected? i.e., the braking system fixed.

NHTSA ID

11639136

Incident

Oct 12, 2024

The contact owns a 2025 BMW X7. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

NHTSA ID

11622874

Incident

Feb 12, 2024

We have periodic driver assist faults coming up , started at 1700 and now has has 3400 miles on it, dealer still cannot fix and BMW either .

NHTSA ID

11621194

Incident

Jul 27, 2024

The contact owns a 2025 BMW X7. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

NHTSA ID

11620670

Incident

Oct 18, 2024