2025 BMW X7

Subject: Safety Complaint – 2025 BMW X7 LED Headlights Provide Insufficient Road Illumination Vehicle: 2025 BMW X7 Category: Exterior Lighting – Headlights Issue: Severely inadequate nighttime visibility Complaint: I am reporting a serious safety concern with the LED headlights on the 2025 BMW X7. The headlights provide poor road illumination, especially at night and on unlit roads. The beam pattern is too low, too narrow, and fails to illuminate critical portions of the roadway. This creates dangerous dark zones directly ahead of the vehicle and significantly reduces reaction time. Compared to prior BMW lighting systems (including BMW’s laser lights and earlier LED projectors), the 2025 X7 headlights perform noticeably worse. The current design does not provide adequate visibility for safe nighttime driving and feels below the standard expected for a modern vehicle in this class. This is not a matter of preference — it is a functional visibility problem that affects safe operation of the vehicle. Multiple owners have reported similar issues, indicating a potential design defect or calibration problem with the headlight system. I request that NHTSA investigate the 2025 BMW X7 exterior lighting performance to determine whether the headlights meet federal safety standards for roadway illumination and whether a recall or corrective action is warranted.

NHTSA ID

11758821

Incident

Aug 8, 2026

Our vehicle's check engine light came on, and we took it to the dealership as it is still under factory warranty. The dealership determined upper radiator blind slat was broken and detached due to an impact. I completely disagree as there is no signs of impact, and there are only signs that this is a poorly designed part. About two weeks after this first event, I was looking for a way to fix this myself as the dealership was wanting close to $2,500 for repairs. While inspecting, I noticed that there was another broken one already. These parts are just poorly made and will not withstand the use required under BMW's design. It is a small thin piece of plastic that will wear and break over time. These are supposed to aid in fuel conservation, but it just seems like a poor design to me. When doing a little internet search, it is obvious that others have had the same issue. [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID

11758270

Incident

Jul 1, 2026

Subject: Formal Complaint – Safety Issue, Repeated Repair Failure, and Dealer Negligence (BMW X7) To Whom It May Concern, I am filing a formal complaint regarding a serious and ongoing safety issue involving my BMW X7 (VIN: [XXX] ), as well as repeated failure by an authorized BMW dealership (Fields BMW Winter Park, Florida) to properly diagnose and repair the vehicle. Since purchase, the vehicle has exhibited a persistent defect involving both rear tires losing air on a daily basis. This condition requires constant manual refilling and repeatedly triggers warning alerts on the vehicle dashboard. Despite bringing the vehicle to the dealership no fewer than five times for the exact same issue, the problem remains unresolved. This represents a clear failure to repair a recurring defect, and more importantly, a potential safety hazard, as tire pressure instability directly affects vehicle control and operational safety. Additionally, during a recent service visit, the vehicle was returned in worse condition than when it was delivered: The tire issue was not resolved; The tires were returned underinflated; A check engine light was activated, which was not present prior to service. This raises serious concerns regarding both the technical competence of the service provider and the adequacy of post-service quality control procedures. Separately, I previously owned a BMW X6 (VIN: [XXX] ), purchased at the same time, which also experienced service-related issues. Due to the overall pattern of poor service and lack of resolution, I have already replaced that vehicle with a Mercedes-Benz. At this stage, I have lost confidence in both the dealership and the manufacturer’s ability to ensure safe and reliable operation of the vehicle. Key concerns for this complaint include: Repeated failure to repair a known defect; Ongoing safety risk related to tire pressure loss; Vehicle returned in unsafe condition after service; Lack of responsiveness and resolution f INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA

NHTSA ID

11733270

Incident

Jan 1, 2025

I was driving my 2025 X7 and the sunroof unexpectedly and spontaneously exploded above my head. I had left my house about 2 minutes prior, driving 40 mph on street near my home. I was in the middle lane of a 6-lane wide street, no car ahead of me and no cars to the side or behind me. Nothing hit my car at all. The glass from the sunroof shattered leaving a large hole, and glass was caught in the sun shade as I had it closed. Had the sun shade been open, I would’ve had glass explode in my face while driving, putting my life in danger. I also have 3 children in car seats who thankfully were not present during the incident. BMW will not acknowledge that this is a defect in the manufacturing or design and are essentially gaslighting me saying a rock hit my car. Again, no car ahead of me in the 100 yards I could see ahead that would suggest anything hit my car. No warnings from the car at all, just spontaneous glass explosion above my head. This is a design flaw at BMW that must be addressed before it kills someone.

NHTSA ID

11729132

Incident

Apr 1, 2026

While driving under normal conditions, the Lane Keep Assist system on my 2025 BMW Alpina XB7 unexpectedly and violently jerked the steering wheel without driver input. The sudden steering intervention caused the vehicle to abruptly change direction and strike a curb, resulting in a loss-of-control event. This occurred without warning and could have resulted in a serious crash involving other vehicles, pedestrians, or roadside obstacles. Additionally, the adaptive cruise control system has repeatedly applied sudden and aggressive braking without an apparent reason or obstacle present. These abrupt braking events create a significant risk of a rear-end collision, as following vehicles are not anticipating such sudden deceleration. These issues involve advanced driver-assistance safety systems that are intended to enhance control and safety. Instead, they are operating in a manner that overrides driver input and introduces unsafe driving conditions. The servicing dealership acknowledged the issues and advised me not to use the Lane Keep Assist and cruise control features. Being instructed to disable safety systems due to unsafe behavior is unacceptable and does not resolve the underlying defect. Given the loss-of-control incident and the ongoing unpredictable braking behavior, I believe these defects present a serious safety risk to vehicle occupants and the public.

NHTSA ID

11714291

Incident

Dec 15, 2025

To:BMW of North America, LLC Customer Relations & Services P.O. Box 1227 Westwood, NJ 07675 Subject: Request for Compensation Due to Prolonged Safety Recall – 2025 BMW X7 (VIN: [XXX] ) Dear BMW Customer Relations, I am writing to formally raise my concern regarding my 2025 BMW X7, which has been subject to an open safety recall since August 2024. It has now been over 13 months without a remedy from BMW. This vehicle was leased through BMW Financial Services with the intent of being used as part of my business operations. Due to the unresolved recall and the associated safety responsibility issues, the vehicle has been restricted from use and rendered inoperable for its intended purpose. Despite this, I continue to make full lease payments, which has placed an unnecessary financial burden on my business for an asset that cannot be utilized. Given the prolonged delay and the material impact on my business, I respectfully request that BMW provide appropriate financial relief or compensation, which may include: •A credit or reimbursement for lease payments made during the period of inoperability, •The option to terminate or exchange the lease without penalty. This situation has been ongoing for well over a year, and I believe BMW has a responsibility to ensure that customers — especially those who rely on their vehicles for business purposes — are not left bearing the cost of a vehicle that cannot be safely used. I appreciate your immediate attention to this matter and look forward to a fair resolution. Sincerely, INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID

11685827

Incident

Aug 6, 2024

The contact's wife owns a 2025 BMW X7. The owner received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic). The contact had called several dealers to check for parts availability and was informed that parts were not yet available and that the manufacturer would mail another letter when parts became available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The owner had not experienced a failure.

NHTSA ID

11685355

Incident

Feb 12, 2024

The contact owns a 2025 BMW X7. The contact received notification of NHTSA Campaign Number: 24V104000 ( ELECTRONIC STABILITY CONTROL (ESC), SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The contact stated that several dealers were contacted and informed the contact that parts were no longer available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.

NHTSA ID

11683703

Incident

Mar 15, 2024

Fastening Elements Return

This Service Bulletin provides instructions to clean the intake valves using the BMW Carbon Blaster Tool P/N 81 29 2 208 034 and the S68T / XB1T Kit P/N 83 30 5 BAD 3D5. Refer to SI B04 12 11 for existing documentation about the carbon blaster tool and SI B04 02 26 for the S68T /XB1T tool kit.

Shaft Return

This Service Bulletin provides instructions to clean the intake valves using the BMW Carbon Blaster Tool

Due to an implementation error in various OBD diagnostics in the vehicle's control units, in very rare cases itmay happen that stored fault memory codes (DTCs) and the MIL (warning light) are not automaticallydeleted even though the underlying malfunction has already been rectified. This does not comply with the statutory OBD specifications.

Due to an implementation error in various OBD diagnostics in the vehicle's control units, in very rare cases itmay happen that stored fault memory codes (DTCs) and the MIL (warning light) are not automaticallydeleted even though the underlying malfunction has already been rectified. This does not comply with the statutory OBD specifications.