2025 GMC Yukon Xl

On January 16, 2026, the Office of Defects Investigation (ODI) opened Recall Query RQ26001.  This investigation was opened to assess the remedy effectiveness of Recall 25V-274. ODI has received complaints alleging engine failure in vehicles after the recall remedy had been completed, whether that remedy involved an oil viscosity change or a complete engine replacement. General Motors (GM) issued Recall 25V-274 to address concerns of engine failure in the L87 engines produced between March 1, 2021 and May 31, 2024. GM cited the root cause as a supplier manufacturing and quality issue. GM’s recall remedy for Recall 25V-274 consisted of two different repairs, either an oil viscosity change or an engine replacement, based on the results of the remedy inspection procedure. ODI continues to receive reports of engine failures after the completion of the recall remedy. To date, ODI has received 499 complaints alleging post-remedy engine failure in vehicles subject to Recall 25V-274, 473 of which involved an oil viscosity change and 26 a complete engine replacement. Additionally, ODI has received 191 reports of L87 engine failures in engines produced after the production period cited in Recall 25V-274. GM reported receiving 6,953 complaints of post-remedy engine failure. ODI is opening this Engineering Analysisto continue investigating complaints of post-remedy engine failure. ODI is expanding the scope of this Investigation to include engines produced after the production period cited in the recall. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.

The contact owns a 2025 GMC Yukon XL. The contact stated that while driving 35 MPH, there was a tapping sound coming from the vehicle and the vehicle stalled. The check engine warning light illuminated and then turned off. The vehicle was driven to the residence. The dealer was contacted by phone and made aware of the failure. The vehicle was taken to the dealer; however, the failure was not duplicated. The failure reoccurred. The contact stated that the tapping sound was louder and more persistent. The vehicle was towed to the dealer, but the vehicle was not diagnosed. The contact stated that the failure had occurred while out of state. The contact stated that the vehicle was unsafe to drive. The failure mileage was approximately 33,500.

NHTSA ID

11768948

Incident

Oct 1, 2026

Mileage

33,500 mi

The car stopped without warning in the middle of a very busy highway that could have caused an accident. The car had to be drug onto a wrecker because the wheels would not turn to be loaded on tow truck. Towed to dealership and have been advised that the engine will have to be replaced due to engine failure. The were no noises, alerts or notifications from the vehicle prior to immediately stopping in the middle of the highway. This is 2025 vehicle with 23k miles.

NHTSA ID

11765117

Incident

Sep 4, 2026

The engine needed to be replaced with just over 2,000 miles.

NHTSA ID

11762130

Incident

Dec 15, 2025

The contact owns a 2025 GMC Yukon XL. The contact stated that while driving 15 MPH, there was an abnormal grinding sound coming from the engine. There was no warning light illuminated. The vehicle was taken to a local dealer to be diagnosed, and the contact was informed that there was a catastrophic engine failure caused by the thrust bearing. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The contact referenced Technical Service Bulletin: 25-NA-307; as a possible cause for the failure. The failure mileage was 16,184.

NHTSA ID

11761088

Incident

Aug 21, 2026

Mileage

16,184 mi

Engine (L87) blew up on I-80 in passing lane with no warning 14,635 miles. Almost got hit by several cars trying to get off the interstate. Sat alongside the road for 1 1/2 hours until tow truck arrived in 101 degree weather. GM provided no roadside assistance since it was a Sunday. They were incorrect with their information which caused us to walk to nearest Walmart several miles. We were 5 1/2 hrs from home and our son picked us up. GM dealer installed new engine and we were without our vehicle 45 days with no alternative transportation provided. Our repurchase was denied and was incorrectly done so by Iowa State Lemon Law (purchased in Iowa)

NHTSA ID

11761042

Incident

Jun 28, 2026

During first oil change at 1200 miles, found a lot of metal flex in the oil filter element after cutting the oil filter open.

NHTSA ID

11756672

Incident

Mar 23, 2026

The contact owns a 2025 GMC Yukon XL. The contact stated that the rear passenger-side second-row seat failed to move or close. The contact was concerned about the warranty expiring soon. The vehicle was taken to the local dealer, where it was determined that the seat needed to be replaced; however, the part was backordered and had not been delivered. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was approximately 55,000.

NHTSA ID

11742935

Incident

Apr 2, 2025

Mileage

55,000 mi

On May 6, 2026 while driving on the interstate, the vehicle automatically shifted into Neutral, and lost all engine power. The vehicle would not shift back into drive or even 4x4 neutral to be towed. The vehicle was towed to Sam Boswell GMC in Mt Dora, FL. The engine had seized up, and there were metal shavings in the oil filter which indicated a catastrophic mechanical engine failure.

NHTSA ID

11742654

Incident

May 6, 2026

This Preliminary Information provides diagnostic tips and guidance for situations where key fobs cannot be learned or programmed successfully.

This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3

Beginning with 2026 model year production, the floor console/armrest lamp design was changed by removing the tilt-switch ball. As a result, the lamp remains illuminated when the floor console compartment lid is closed. The BCM turns the lamp off after the ignition is switched off to prevent battery rundown. This PI is to inform dealers of the change in the lamp and operation of the lamp following repairs.

This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC display

This Preliminary Information is to inform technicians to not replace any parts at this time and to use the work around provided. When a fix is available, this PI will be updated to a bulletin.

This Preliminary information communicates an issue with the virtual garage door opener not programming to a garage opener and to replace the opener with a new updated part.