RoadVitals

2024 Chevrolet Colorado Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Data refreshed

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
3
Newest Sep 19, 2024
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
1
1 investigation on file

Recall campaigns

3 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

24V703000

SEAT BELTS:CRITICAL FASTENERS

Sep 19, 2024
151 units potentially affected
The defect: General Motors, LLC (GM) is recalling certain 2023-2024 Chevrolet Colorado and 2023 GMC Canyon vehicles. The left or right front seat may have a seat belt buckle attachment bolt that was not tightened properly.
The risk: A loose seat belt may not properly restrain an occupant in a crash, increasing the risk of injury.
The remedy: Dealers will tighten the left and right front seat belt buckle attachment bolts, free of charge. Owner notification letters were mailed October 30, 2024. Owners may contact Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-800-462-8782. GM's number for this recall is N242453720.
General Motors, LLCManufacturer number N242453720View on NHTSA.gov
24V491000

FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP:MOUNTING PLATE/FLANGE; FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY

Jun 28, 2024
8,622 units potentially affected
The defect: General Motors, LLC (GM) is recalling certain 2024 Chevrolet Colorado and GMC Canyon vehicles. The lock ring that secures the fuel pump to the fuel tank assembly may not have been fully locked during assembly, which can result in a fuel leak during a crash.
The risk: A fuel leak in the presence of an ignition source increases the risk of a fire.
The remedy: Dealers will inspect and fully lock the fuel tank lock ring as necessary, free of charge. Owner notification letters are expected to be mailed August 13, 2024. Owners may contact Chevrolet customer service at 1-800-222-1020, or GMC Customer Call Center at (888) 988-7267. GM's number for this recall is N242451330.
General Motors, LLCManufacturer number N242451330View on NHTSA.gov
24V366000

TIRES

May 23, 2024
56 units potentially affected
The defect: General Motors, LLC (GM) is recalling certain 2024 Chevrolet Colorado vehicles. Incorrect tires may have been installed that do not match the tire label, and the tire pressure monitoring system (TPMS) may provide inaccurate information for the installed tires. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 110, "Tire Selection and Rims" and 138, "Tire Pressure Monitoring Systems."
The risk: A tire label that does not accurately reflect the installed tires may result in the installation of incorrectly sized tires. In addition, the TPMS may not warn the driver of a drop in tire pressure. Both of these scenarios can increase the risk of a crash.
The remedy: Dealers will inspect and replace the tires as necessary, free of charge. Owner notification letters were mailed June 19, 2024. Owners may contact Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N242444030.
General Motors, LLCManufacturer number N242444030View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

EA26006OpenEngineering Analysis

Electronic Brake Module Component Failure

Opened Aug 21, 2026

On April 11, 2024, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE24011 after receiving complaints concerning a loss of brake assist in 2023 MY Cadillac Lyriq vehicles. These complaints allege a hard brake pedal, followed by a “Brake System Failure” message at start up or while driving. GM shared records regarding several internal investigations for loss of brake assist due to alleged spindle fractures in the eBoost system. GM has stated that in the event of a spindle fracture, anti-lock brakes (ABS), stability control, and traction control remain functional until the vehicle comes to a complete stop. At this point, ABS, brake assist, stability control, and traction control functions are lost. The loss of these functions causes the vehicle to set one of three Diagnostic Trouble Codes (DTCs) based on failed performance criteria for the Electronic Brake Control Module (EBCM). These DTCs, in turn, activate several driver alerts: an audible chime, a visual “Service Brake System” message in the display, and multiple illuminated Malfunction Indicator Lights (MILs) for the ABS, Traction Control, and Brakes informing the driver of loss of functionality. The vehicle speed will also be limited to 70 KPH (43 MPH). Since opening PE24011, ODI has continued to receive reports of loss of brake assist. Some of these reports describe symptoms inconsistent with GM’s description of a spindle failure. These reports allege an immediate loss of brake assist functionality as opposed to the loss occurring after the vehicle comes to a complete stop. The sudden loss of brake assist during a braking event could result in extended braking distance, which increases the risk of a crash or injury. ODI believes further analysis is necessary to assess the potential for failures in GM’s eBoost system to resulting in safety-related outcomes. At this time, ODI is aware of the following vehicles that are equipped with this eBoost system: 2023-2026 MY Cadillac Lyriq, Chevrolet Colorado, and GMC Canyon; 2024-2026 MY Buick Enclave, Envision; Chevrolet Blazer EV, Equinox EV, Traverse; Cruise Origin; and GMC Acadia; 2025-2026 MY Cadillac Celestiq and Optiq. ODI is also aware of 2024-2026 MY Acura ZDX and 2024-2026 MY Honda Prologue vehicles that were built with this system. The Acura and Honda vehicles were manufactured by GM in a joint venture with Honda, and will be included in the Engineering Analysis as peer vehicles. ODI is opening this Engineering Analysis to further assess the safety-related consequences of a failed eBoost system. In addition, ODI is expanding the scope of the investigation to encompass all GM vehicles that share this eBoost system. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.

SERVICE BRAKES

Elsewhere on this vehicle

Data sources

Data on this page last refreshed .