RoadVitals

1999 Chevrolet P30

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
2
Latest Sep 7, 2022
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest Oct 24, 2007
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 2 NHTSA owner-reported complaints for the 1999 Chevrolet P30, most frequently naming the brakes, driver assistance and suspension categories. 1 safety recall has been issued covering this model year; and 7 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Brakes250.0%
  • Driver assistance125.0%
  • Suspension125.0%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
07E088000

EQUIPMENT

Oct 24, 2007
121,680 units potentially affected
The defect: CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.
The risk: THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE.
The remedy: HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.
HONEYWELL INTERNATIONAL, INC.View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

Brakes
Filed Sep 7, 2022

The contact owns a 1999 Chevrolet P30 Truck. The contact stated while driving approximately 20 MPH in stop and go traffic, the brake pedal was depressed and went to the floorboard. The contact was able to drive the vehicle to his destination. The contact stated no warning light was illuminated. The contact drove the vehicle to an independent mechanic who diagnosed that the brake fluid needed to be flushed and replaced. The contact had the vehicle repaired. The failure reoccurred after replacing the brake fluid. The vehicle was towed to another independent mechanic. The vehicle had not been diagnosed or repaired. The manufacturer had not been informed of the failure. The failure mileage was approximately 41,000.

NHTSA ID
11483391
Incident
Aug 18, 2022
Mileage
41,000 mi
BrakesDriver assistanceSuspension
Filed Jul 29, 2009

1999 CHEVY P-30 ABS ACTIVATION AT VERY LOW SPEED UNABLE TO STOP. BOTH SENSORS REPLACED AT COST OF $350 EACH AND STILL DOES IT. NEW BRAKES AND WHEEL BEARINGS ON FRONT FOR $700 AND STILL DOES IT. DISCONNECTED ABS AND BRAKES WORK FINE. *TR

NHTSA ID
10278675
Incident
Jun 1, 2009
Mileage
165,000 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

17-NA-073

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

This warranty administration bulletin provides information regarding the field action courtesy transportation policy.

Recalls

EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

Vehicle Recalls

99-08-51-007F

EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; WHEELS

Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin.

99-08-51-007F

EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; WHEELS

Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin.

PI0281D

EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS

Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.

PI0281D

EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS

Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Chevrolet P30 by model year
YearComplaintsRecallsInvestigationsIssue Index
1999Viewing210—
1998920—
1997020—
1996520—
1995020—
1994930—
1993320—
1992420—
1991120—
1990232—
1989130—
1988031—
1987334—
1986326—
1985266—
1984045—
1983021—
1982031—
1981011—
1980020—
1978050—
1977050—
1976030—
1975040—
1974030—
1973020—
1971020—
1970010—
1967010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.