RoadVitals

1984 Dodge Ram 50 Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Newest Dec 7, 1984
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
2 investigations on file

Recall campaigns

1 campaign cover this model year — what the defect is, what it could cause, and what the remedy is

84V157000

ENGINE AND ENGINE COOLING:ENGINE

Dec 7, 1984
6,755 units potentially affected
The defect: THE ENGINE OIL PRESSURE SENDING UNIT MAY DEVELOP AN OIL LEAK.
The remedy: OIL PRESSURE SENDING UNIT WILL BE REPLACED WITH A MODIFIED TYPE FREE OF CHARGE.
CHRYSLER CORPORATIONView on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect, and it is not a recall.

EA88006ClosedEngineering Analysis

STEERING OUTPUT SHAFT

Opened Nov 3, 1987
Closed Apr 1, 1988

SUMMARY OF INFORMATION FROM MANUFACTURER:BOTH CHRYSLER AND MITSUBISHIINDEPENDENTLY CONCLUDED THAT THE FAILURES WERE DUE TO SEVERE IMPACT LOADINGTRANSMITTED TO THE SHAFT BY THE STEERING LINKAGE SYSTEM -- IN OTHER WORDSSHAFT FAILURE IS THE RESULT, NOT THE CAUSE, OF THE ALLEGED COLLISIONCIRCUMSTANCES.MITSUBISHI (VEHICLE PRODUCER) DID STRENGTHEN THE SHAFTDURING THE 1984 MODEL YEAR BY INCREASING THE SPLINE AND BEARING JOURNALDIAMETERS.ANALYSIS:FAILING COMPONENT IS THE STEERING BOX CROSS SHAFT (OUTPUT SHAFT)WHICH BREAKS BETWEEN THE BOTTOM BEARING IN THE STEERING BOX AND THE PITMANARM.KNOWN FAILURES INVOLVE 4 WHEEL DRIVE UNITS WHICH ARE EQUIPPED WITHPOWER STEERING.CROSS SHAFT AND PITMAN ARM SALES ARE CONSIDERABLY HIGHERON THE 4 WD UNITS THAN THE 2 WD UNITS.CHRYSLER REPORTS THE CROSS SHAFTDIAMETER WAS INCREASED IN APRIL, 1984, FOR INCREASED SHAFT STRENGTH TOIMPROVE ITS CAPABILITY TO WITHSTAND SEVERE IMPACT LOADS.PROPOSED ACTION:IR'S TO CHRYSLER AND MITSUBISHI SENT 11/16 - 17/87.AWAITING RESPONSES.===

STEERING
PE87037ClosedPreliminary Evaluation

PITMAN ARM FAILURE

Opened Jul 1, 1987
Closed Nov 3, 1987

SUMMARY OF INFORMATION FROM MANUFACTURER:BOTH CHRYSLER AND MITSUBISHIINDEPENDENTLY CONCLUDED THAT THE FAILURES WERE DUE TO SEVERE IMPACT LOADINGTRANSMITTED TO THE SHAFT BY THE STEERING LINKAGE SYSTEM -- IN OTHER WORDSSHAFT FAILURE IS THE RESULT, NOT THE CAUSE, OF THE ALLEGED COLLISIONCIRCUMSTANCES.MITSUBISHI DID STRENGTHEN THE SHAFT DURING THE 1984 MODELYEAR BY INCREASING THE SPLINE AND BEARING JOURNAL DIAMETERS.ANALYSIS:FAILING COMPONENT IS THE STEERING BOX CROSS SHAFT (OUTPUT SHAFT)WHICH BREAKS BETWEEN THE BOTTOM BEARING IN THE STEERING BOX AND THE PITMANARM.KNOWN FAILURES INVOLVE 4 WHEEL DRIVE UNITS EQUIPPED WITH POWERSTEERING.CROSS SHAFT AND PITMAN ARM SALES ARE CONSIDERABLY HIGHER ON 4WHEEL DRIVE UNITS THAN 2 WHEEL DRIVE UNITS.CHRYSLER REPORTS THE CROSSSHAFT DIAMETER WAS INCREASED IN APRIL, 1984, FOR INCREASED SHAFT STRENGTHTO IMPROVE ITS CAPABILITY TO WITHSTAND SEVERE IMPACT LOADS.PROPOSED ACTION:UPGRADE THIS PE TO AN EA.CONTACT MITSUBISHI FORINFORMATION ON COMPARABLE VEHICLES.===

STEERING

Elsewhere on this vehicle

Data sources