FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY
2006 Ducati Mts 620
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Overview
Our database contains 2 NHTSA owner-reported complaints for the 2006 Ducati Mts 620, most frequently naming the fuel system and interior & seats categories. 1 safety recall has been issued covering this model year; and 23 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
Not enough dated records to plot a meaningful trend — 2 months of data.
What owners report
Complaints grouped by the component NHTSA recorded
- Fuel system266.7%
- Interior & seats133.3%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
1 campaign cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govRecent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
TL* THE CONTACT OWNS A 2006 DUCATI MTS 620 MOTORCYCLE. THE CONTACT STATED THAT THE FUEL TANK WAS EXPANDING TO THE POINT WHERE THE TANK WAS OVERLAPPING OTHER COMPONENTS OF THE ENGINE. THE CONTACT BELIEVED THE FAILURE TO BE CAUSED BY ETHANOL IN THE FUEL THAT WAS CAUSING THE PLASTIC FUEL TANK TO EXPAND. IN ADDITION, THE CONTACT STATED THAT THE SEAT WAS INCORRECTLY SIZED. THE MOTORCYCLE WAS NOT REPAIRED. THE FAILURE MILEAGE WAS 4,500.
- NHTSA ID
- 10406268
- Incident
- May 13, 2011
- Mileage
- 4,500 mi
TL* THE CONTACT OWNS A 2006 DUCATI MULTISTRADA 620. THE CONTACT STATED HE RECEIVED NOTIFICATION OF NHTSA CAMPAIGN ID NUMBER: 11V020000 (FUEL SYSTEM, GASOLINE STORAGE:TANK ASSEMBLY). THE CONTACT STATED THAT THE REMEDY OFFERED BY THE MANUFACTURER WAS NOT SUFFICIENT ENOUGH TO CORRECT THE FAILURE. HE STATED THAT THE REMEDY WAS ONLY A TEMPORARY REPAIR TO THE FAILURE AND WOULD NOT ACTUALLY CORRECT THE ISSUE ITSELF. THE MANUFACTURER WAS CONTACTED WHO ADVISED THE CONTACT THAT THE REMEDY WAS AN ADEQUATE REPAIR. THE CONTACT HAD NOT EXPERIENCED A FAILURE. THE CURRENT MILEAGE WAS 11,000.
- NHTSA ID
- 10384372
- Incident
- Feb 4, 2011
- Mileage
- 122,000 mi
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
SUSPENSION
Procedure for Assessing Front Fork Oil Leaks. Applicability: All Models. This service repair bulletin informs dealers and service managers of the assessment criteria for identifying front fork-related defects. The purpose is prevent technicians from mistaking oozing oil or assembly grease, for legitimate defects. The bulletin further provides examples and pictures for clarification.
SERVICE BRAKES, HYDRAULIC
Guided Diagnosis for Front Brake System Bleeding. Applicability: All Models. This Service Bulletin replaces and cancels the previous bulletin SRV-SRB-20-014 published on 4/17/2020. It provides dealers and service managers with needed information to correctly bleed the front brake system of the various Ducati models. This bulletin further refers the reader to an attached diagnosis guide. The referenced guide/annex is available to NHTSA upon request.
ENGINE AND ENGINE COOLING; POWER TRAIN
Finial Drive Chain Maintenance Precautions. Applicability: All Models and Model Years (except XDiavel). This Service Bulletin replaces and cancels the previous bulletins: SRV-SRB-18-030 published on 05/11/2018, SRV-SRB-19-046 published on 12/31/2019, SRV-SRB-20-050 published on 11/24/2020. It provides dealers and service managers additional final drive chain care to ensure optimum performance and longevity for the chain. this includes cleaning, lubricating, inspecting and tension guidelines.
ENGINE AND ENGINE COOLING
Procedure for Analysis and Control of Oil and Coolant Leaks from Engine_Rev.01. Applicability: All Models. This service repair bulletin instructs dealers and service managers on authorized procedures for identifying and isolating coolant and engine oil leaks. The use of a prescribed leak trace powder is stressed. This bulletin includes service instructions.
ENGINE AND ENGINE COOLING
Precautions to Follow During Crankcase Cleaning. Applicability: All Models. This service bulletin informs dealers and service managers about precautions in using abrasive cleaners for engine component sealant, and in particular the crankcase covers. The bulletin further provides cleaning instructions with approved cleaning tools.
ENGINE AND ENGINE COOLING
Procedure for Analysis and Control of Oil and Coolant Leaks from Engine. Applicability: All Models. This service bulletin provides dealers and service managers with troubleshooting guidance for oil or coolant leaks. This bulletin includes service instructions.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.