RoadVitals

2012 Fccc Mc Recalls

Safety recall campaigns filed with NHTSA that cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
Recall campaignsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Newest Apr 29, 2014
Carrying an NHTSA advisoryCampaigns where NHTSA told owners not to drive the vehicle, or to park it outside, until the repair is done.
0
Open investigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0

Recall campaigns

4 campaigns cover this model year — what the defect is, what it could cause, and what the remedy is

14E019000

POWER TRAIN:AXLE HUBS

Apr 29, 2014
73 units potentially affected
The defect: Meritor, Inc. is recalling certain wheel ends for drive axles with ConMet PreSet Plus Hubs manufactured August 2012 and December 2012. Due to a missing locking snap ring on the axle hub, the rear wheels may separate from the vehicle.
The risk: Wheel separation from the vehicle increases the risk of a crash.
The remedy: Meritor will notify owners, and dealers will inspect the affected wheel ends for the lock ring, installing them as needed, free of charge. The safety recall began in June 2014. Owners may contact Meritor at 1-866-668-7221. Meritor's number for this recall is C14AA.
Meritor, Inc.Manufacturer number C14AAView on NHTSA.gov
13E054000

POWER TRAIN:AXLE ASSEMBLY

Oct 17, 2013
82 units potentially affected
The defect: Meritor, Inc. is recalling certain wheel ends for drive axles with ConMet PreSet Plus Hubs manufactured between August 2012 and December 2012. Due to a missing locking snap ring on the axle hub, the rear wheels may separate from the vehicle.
The risk: Wheel separation from the vehicle increases the risk of a crash.
The remedy: Meritor will notify owners and dealers will inspect the affected wheel ends for the lock ring, installing them as needed, free of charge. The safety recall began on October 23, 2013. Owners may contact Meritor at 1-866-668-7221.
Meritor, Inc.Manufacturer number C14AAView on NHTSA.gov
12V242000

SERVICE BRAKES, HYDRAULIC

May 30, 2012
2,287 units potentially affected
The defect: DAIMLER TRUCKS NORTH AMERICA (DTNA) IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2012 FREIGHTLINER CUSTOM CHASSIS INCOMPLETE MOTORHOME CHASSIS MANUFACTURED FROM MARCH 18, 2005, THROUGH JULY 19, 2011, EQUIPPED WITH BOSCH HYDRAULIC DISC BRAKE. HYDRAULIC BRAKE EQUIPPED MOTORHOME CHASSIS EXPOSED TO LONG PERIODS OF TIME OF NON-DRIVING MAY EXPERIENCE DIAMETRICAL BRAKE CALIPER PISTON GROWTH AND REDUCED PISTON TO BORE CLEARANCE POTENTIALLY LEADING TO BRAKE DRAG AND OVERHEATING RESULTING IN REDUCED BRAKE PERFORMANCE.
The risk: REDUCED BRAKE PERFORMANCE MAY LEAD TO A VEHICLE CRASH.
The remedy: DTNA WILL NOTIFY OWNERS, AND DTNA DEALERS WILL REPAIR THE VEHICLES, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 7, 2012. OWNERS MAY CONTACT DTNA AT 1-800-547-0712.
DAIMLER TRUCKS NORTH AMERICAManufacturer number FL-628View on NHTSA.gov
11V474000

ENGINE AND ENGINE COOLING

Sep 15, 2011
6,225 units potentially affected
The defect: DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2011- 2012 BUSINESS CLASS M2 AND CORONADO TRUCKS MANUFACTURED FROM SEPTEMBER 1, 2010, THROUGH DECEMBER 31, 2010, EQUIPPED WITH A CUMMINS ISX OR ISL DIESEL ENGINE. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.
The risk: IF THE INLET OR OUTLET SECTIONS DISCONNECT, HOT EXHAUST GASES CAN VENT PRIOR TO EXITING THE TAILPIPE, CREATING THE RISK OF COMBUSTION AND A FIRE. IF BOTH CLAMPS FAIL, THERE IS A RISK IN SOME APPLICATIONS THAT THE DOC/DPF HOUSING MAY DETACH COMPLETELY, CREATING A ROAD HAZARD.
The remedy: DAIMLER TRUCKS IS WORKING WITH CUMMINS TO IDENTIFY AND NOTIFY OWNERS OF THE RECALL CAMPAIGN. REPAIRS WILL BE PERFORMED BY AUTHORIZED CUMMINS DEALERS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 10, 2011. OWNERS MAY CONTACT CUMMINS AT 1-812-377-5000 OR DAIMLER TRUCKS AT 1-800-547-0712.
DAIMLER TRUCKS NORTH AMERICAManufacturer number FL-611View on NHTSA.gov

What a recall is

Safety recall
A safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
Safety investigation
NHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
Manufacturer communication
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Elsewhere on this vehicle

Data sources