RoadVitals

2008 Fccc Xcp

Recalls, owner-reported complaints, investigations and safety data

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
0
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest Aug 8, 2007
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains no NHTSA owner-reported complaints for the 2008 Fccc Xcp. 1 safety recall has been issued covering this model year; and 179 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
07V343000

STEERING:GEAR BOX:SHAFT PITMAN

Aug 8, 2007
5,949 units potentially affected
The defect: CERTAIN MOTOR HOME CHASSIS EQUIPPED WITH ZF MODEL 8018 STEERING GEARS MAY HAVE BEEN ASSEMBLED WITH THE INCORRECT RECIRCULATING BALL SPACER. THIS COULD POTENTIALLY ALLOW THE RECIRCULATING BALLS TO ESCAPE FROM THE RECIRCULATING BALL CIRCUIT RESULTING IN A LOSS OF STEERING.
The risk: THE OPERATOR MAY NOTICE HIGHER REQUIRED STEERING WHEEL INPUTS, OR THE NEED FOR MORE STEERING WHEEL ADJUSTMENTS WHILE DRIVING IN A STRAIGHT LINE IN COMBINATION WITH METALLIC CRACKING NOISES PRIOR TO A LOSS OF STEERING. LOSS OF STEERING COULD RESULT IN A VEHICLE CRASH.
The remedy: DEALERS WILL REPLACE THE STEERING GEAR FREE OF CHARGE. PHASE ONE OF THE RECALL BEGAN ON JANUARY 30, 2008 FOR 1,392 VEHICLES. EXPANDED MAILINGS ARE EXPECTED TO BEGIN ON MAY 16, 2008. OWNERS MAY CONTACT FREIGHTLINER AT 1-800-547-0712.
FREIGHTLINER LLCManufacturer number FL-509View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

No owner complaints recorded for this model year

Either none have been filed with NHTSA, or this vehicle is too new for reports to have accumulated.

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

SBU35-012

POWER TRAIN

FCCC Service Bulletin for Axle Flange Gasket Replaced with O-Ring. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed.

SBU54-056

ELECTRICAL SYSTEM; EQUIPMENT

Freightliner Custom Chassis Service Bulletin for When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues. When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter® is the only Daimler-approved tool for troubleshooting vehicle Powernet issues.

19TL-15

ENGINE AND ENGINE COOLING; EQUIPMENT

Tool Letter for ICC5 Programming Cable

17TL27

FUEL SYSTEM, GASOLINE

17TL27 Injector Cup Tool DSN930E17001

17TL26

EQUIPMENT

17TL26 Injector Heat Sleeve Removal Tool DSN930E17002

17TL28

EQUIPMENT

17TL28 Fuel Injector Removal Tool DSN930E17004

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Fccc Xcp by model year
YearComplaintsRecallsInvestigationsIssue Index
2026010—
2025030—
2024000—
2021030—
2020030—
2019060—
2018050—
2017040—
2016030—
2015040—
2014030—
2013020—
2012010—
2011000—
2010000—
2009000—
2008Viewing010—
2007010—
2006010—
2005010—
2004010—
2003010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.